• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How long have you had your tremmic?

  • Thread starter Thread starter BlownStangGT
  • Start date Start date Feb 2, 2004

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 2, 2004
#1
  • Feb 2, 2004
  • #1
Well, I have decided that instead of buying a newer car I am going to keep my stang and start work on it. The t-5 I have now is shot. i was going to replace it with another or a turbo coupe tranny but since have decided that I am going to spend the money well and go with a tremmic tranny. D&D wants 1199 for thier 3550 and 1349 for thier tko. Brotehrs wants 1399 for the 3550 and 1549 for the tko. i will probably go with the tko since it is the better deal from D&D. I will also get a good clutch and other stuff I need. What I want to know is how do you guys/gals like your trannys and how long have u had them without needing a rebuild? thanx alot. I am tried of going through 4 t-5's the past 4 years
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 3, 2004
#2
  • Feb 3, 2004
  • #2
Four years, one rebuild due to the fact I had a worn yoke that allowed the oil to leak out. Even with only 1 quart of oil, there wasn't much wear and no real damage. If you keep them filled with the GM Syncromesh that it calls for, they are almost indestructible in a street stang.

Allow 500 easy miles for a break in and it will shift smooth and easy. I have no complaints in that area.
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 3, 2004
#3
  • Feb 3, 2004
  • #3
Thanx, I think im gonna save as much as I can till about May and then look into getting a tko which is only 250 bux more then a 3550.
 

blown1989saleen

Founding Member
Aug 8, 2001
1,397
0
37
oxford,pa
Feb 3, 2004
#4
  • Feb 3, 2004
  • #4
my 3550 WAS 7yrs old, may it RIP i broke third gear about a month back. I took it to Bob Hanlon, he says im better off buying a new one as the case is craking(tremecs are bad for this) the input shaft is starting to twist and by time he finished with it id have near as much in this one as new one, I was very happy with trans, It broke due to my bone head driving and held well to my abuse over the years. Im just gonna go with a 3550 again. I would go with a TKO but my Spec stage3 has hardly any miles on it and i feel the 3550 is plenty strong enough as i dont run on slicks. I say go for the TKO youll be pretty happy.




Scott


Scott
 

GT40XStang9

Thanks to Tim, I get off pretty easy.
Founding Member
Feb 26, 2001
25
33
89
Scotland UK
Feb 3, 2004
#5
  • Feb 3, 2004
  • #5
I've had my tremec about 5/6 years I think... maybe 7. She's been asking me for a synchro rebuild lately, but she'll just have to wait.
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 3, 2004
#6
  • Feb 3, 2004
  • #6
I will throw up another post to decide whether I want the 3550 or the tko...Im thinking tko since its only 250 more, but I also want to throw in a set of long tubes as well when I have it all apart I think.
 
9

93steeda

New Member
Dec 29, 2003
50
0
0
North Carolina
Feb 3, 2004
#7
  • Feb 3, 2004
  • #7
I just installed my tko, put a ram clutch in and topped it off with a pro-50 shifter. LOVE IT! There is no way I would go back to a t-5. I broke two of them in a year. Definately get the pro-50 shifter with it.
 

perkys stang

New Member
Jan 1, 2000
7,132
0
0
PA
Feb 3, 2004
#8
  • Feb 3, 2004
  • #8
tremec
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 3, 2004
#9
  • Feb 3, 2004
  • #9
perkys stang said:
tremec
Click to expand...
yeah I noticed that after i posted it haah
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 3, 2004
#10
  • Feb 3, 2004
  • #10
93steeda said:
I just installed my tko, put a ram clutch in and topped it off with a pro-50 shifter. LOVE IT! There is no way I would go back to a t-5. I broke two of them in a year. Definately get the pro-50 shifter with it.
Click to expand...

yup....I will get a pro 5.0 shifter for it as I have one for the t-5 now. I am also going ot get a SPEC stage 3 clutch...do you need a speical driveshaft for the tko?
 

5.0's 4 ever

The #1 Stunna
Founding Member
Jan 22, 2000
5,794
0
76
Orlando, FL
Feb 4, 2004
#11
  • Feb 4, 2004
  • #11
BlownStangGT said:
do you need a speical driveshaft for the tko?
Click to expand...

You do not need a special driveshaft for a TKO. It does require a different yoke due to output shaft being 31 spline, but a new yoke will come with your new TKO anyways.

I have run my TKO for 2 years now and love it, very smooth, can't miss a shift, zero problems with it. I am going to put a TKO in my cobra also when the T45 goes out.
 

5.0 HOtrain

Founding Member
May 20, 2001
2,247
0
47
New Hampshire
Feb 4, 2004
#12
  • Feb 4, 2004
  • #12
I've had mine for about 5k behind a 303rwhp 302. Now I'm asking it to live behind my 600/600 hp/tq stroker I'm thinking that I'll be calling x2c motorsports for a tranny from them before the summers out. FWIW, like the 3550 that I have now
 

RaSMG

Founding Member
Oct 5, 2002
270
0
0
Central Cali
Feb 4, 2004
#13
  • Feb 4, 2004
  • #13
I just got a TKO tranny from Central Florida Motorsports for 1299 .. it was a monthly deal/january and it's over but maybe if you call them and make up some BS about their website didnt work for you they might hook you up especially if you buy a few more things because theyre not making anything on that price. I also have a spec stage 3 clutch and spec/star aluminum flywheel on the way. I got a steeda tri-ax shifter to put on it, based on what i read comparing the steeda vs the pro5.0 i thought the steeda would fit me better. haven't gotten it installed yet but should have in runnin in a week or so and i'll definitely be testing it out. oh and tremec is putting out 3 new versions of the tko with different gear sets and that handle more tq. they have one thats got a higher/longer 2.87 first gear for less wheel spin plus a lower .82 fifth gear that a lot of the racers like because it doesn't drop down so much if you redline 4th, i almsot wish i'd've waited a few weeks but i bet these new ones are gonna be way more $$$.
http://www.tremectransmissions.com/English/news/20news.asp
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 5, 2004
#14
  • Feb 5, 2004
  • #14
RaSMG said:
I just got a TKO tranny from Central Florida Motorsports for 1299 .. it was a monthly deal/january and it's over but maybe if you call them and make up some BS about their website didnt work for you they might hook you up especially if you buy a few more things because theyre not making anything on that price. I also have a spec stage 3 clutch and spec/star aluminum flywheel on the way. I got a steeda tri-ax shifter to put on it, based on what i read comparing the steeda vs the pro5.0 i thought the steeda would fit me better. haven't gotten it installed yet but should have in runnin in a week or so and i'll definitely be testing it out. oh and tremec is putting out 3 new versions of the tko with different gear sets and that handle more tq. they have one thats got a higher/longer 2.87 first gear for less wheel spin plus a lower .82 fifth gear that a lot of the racers like because it doesn't drop down so much if you redline 4th, i almsot wish i'd've waited a few weeks but i bet these new ones are gonna be way more $$$.
http://www.tremectransmissions.com/English/news/20news.asp
Click to expand...

thanx for the info, yeah I bet they will be more, ill probbaly just go with the tko for 1349 from d&d in May, unless i find a deal somewhere else. I also want a lower 5th gear for high way cruising with 3.73s onthe highway. I dont have to worry about going into 5th in the 1/4
 
U

usedtobe 67p51d

New Member
Jul 8, 2003
208
0
0
let's tear up golfcourses and build race tracks!
Feb 5, 2004
#15
  • Feb 5, 2004
  • #15
geeze, they come out with the tranny I want after 4 years of owning a tremec...right when I'm thinking of selling my '67 fastback to move up to a turbo 911! zero problems with my tremec other than to low of firsty gear for my 331 motor!
 
You must log in or register to reply here.

Similar threads

Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
552
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
685
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
75
The Welcome Wagon Jul 3, 2026
5150K
5
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
389
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
F
Getting my old autocrosser running again
  • flightops
  • Aug 28, 2025
  • The Welcome Wagon
Replies
6
Views
273
The Welcome Wagon Aug 28, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?