How to remove Foglight Assembly?

[Silvergto2]

I ordered some clear fog light lenses and wanted to know how to remove the foglight assembly? I haven't gotten a chance to get under there yet and take a look. Any tips would be apprieciated

 

[Nater]

There are three screws, two on the top corners and one on the bottom. Access the one from under the bumper and then the other two (I don't remember if they are philips or torx screws) from behind. Unhook the light and install the new fogs. If you didn't get the brackets, carefully remove the old housings from them and then reinstall the new housings. If you can change your oil, you can do this fix. It's easy.

 

[ToplessStang]

There are three screws, two on the top corners and one on the bottom. Access the one from under the bumper and then the other two (I don't remember if they are philips or torx screws) from behind. Unhook the light and install the new fogs. If you didn't get the brackets, carefully remove the old housings from them and then reinstall the new housings. If you can change your oil, you can do this fix. It's easy.

Yup, philips screws.

 

[bakos24]

Yep, 3 total. The top 2 are kind of a pain. There easy to come off but when you try and put the screws back in you cant see the holes. You have to kind of feel around for them.

 

[san~man]

It was easier for me to take the bumper skin off rather than sit under the car and f**k with those two screws.