i know what i'm buying with my taxes....

[MI95Cobra]

after taking about 2 weeks of debating and trying to decide what i really want to spend the taxes on for my car...i did want heads, but that would be just heads and nothin else......so i've finnally decided....here's my list: upr short throw shifter (the shifter i have the handle is stretching my boot and and tearing it up), cobra r hood (3" lift), bbk shorty headers, smog delete, headlights (94-98 mustang 1pc halo projector headlights Black clear), ford racing cobra valve covers (give it a unique look under the hood), e303 cam......would a f303 cam work better with what i want??? well what do ya'll think???? anyone with different suggestions???

 

[trav_19]

i have heard nothing but problems w/ the headlights your looking at getting

 

[frcefedlx]

It shows gears (not installed ) in your sig. when are you going to do those? They are a good mod.

 

[The Green GT]

DO NOT GET THOSE HEADLIGHTS.

I have them and they suck. Instalation is one of the biggest PITA ever and then they have all kinds of crap in them because of the way they are made the projector bulb does not seal properly.

Get some smoked heads and corners. Ill be doing that soon. I wish I would have never bought them.

Granted they do look awesome as **** at night.

 

[drakesdad]

It shows gears (not installed ) in your sig. when are you going to do those? They are a good mod.

agreed.....if you havn't got them installed ......DO IT!

 

[94five-0h]

get a 4 piece smoked headlights, i love mine- with Real HID conversion. Its hard to find a nice quality fit one piece set. most of them don't fit right or warped out of hell.

I'm still trying to figur out what i should do with my return also. prolly a toque converter and shift kit

 

[ProKiller]

i would spend some money and get those gears installed. as far as the cams concerned...the e303 is a bit more mild than the f.

 

[MI95Cobra]

awhile back i wrote a thread about the difficulty in installing gears....most responded that it wasn't hard to install, just time consuming...so i was waiting until the weather straightens out to install them.....

 

[trav_19]

not to jack your thread but did you ever get 4.10's put in your car will?

 

[final5-0]

Without knowing about if you are gonna keep your GT40 heads
or
You made talk about upgrading them at first

You would be wise to make that decision before considering
an alphabet cam

If you decide to go to nicer heads ...............
I'd pass on an e or f or any other letter kinda cam Ford offered

Grady

 

[MI95Cobra]

ok...i did it i bought all the stuff.....these are the things i bought: headlights 94-98 ford mustang euro corner and headlights - jdm black (my wife likes them so much that she made me buy her a pair also ), cobra valve covers with the black wrinkles that have the polish finish, smog pump eliminator ( again my wife made me buy her 1), mac shortie headers (hts coated), b&m ripper shifter, 3" cobra r hood, e303 cam, sony amp (i don't like the mach 460 amps that are in my car already) :SNSign: i'm also going to keep my stock gt40 heads....atleast for another year....

 

[MI95Cobra]

the guy i'm buying the ripper shifter from i need your address to send the $...i accidently deleted it....

 

[Synned]

Good job from not buying those headlights...I had them and switched too..

 

[Therian]

I don't want to rain on your parade or anything (just trying to help) but did you read up on the mach460 before buying that amp?

If you want to change anything (except for simply adding a sub or a deck) you basically need to rip out all of the factory equipment and replace it with aftermarket. The factory amps and speakers use a different resistance than standard car audio equipment, so aftermarket speakers and amps are usually incompatible.

 

[MI95Cobra]

yes i did therian thanks, see the person who had the car before me messed with the wiring...i'ved straightened it mostly out, but when i turn on my radio i hear a loud hum when the cars on...so i'm gonna start over fresh with it....

 

[ctstanger]

DO NOT GET THOSE HEADLIGHTS.

I have them and they suck. Instalation is one of the biggest PITA ever and then they have all kinds of crap in them because of the way they are made the projector bulb does not seal properly.

Get some smoked heads and corners. Ill be doing that soon. I wish I would have never bought them.

Granted they do look awesome as **** at night.

What kind and from whom did you get yours from?



.