• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

I sold Hack Job & picked up an 04 Cobra

  • Thread starter Thread starter SVT32VDOHC
  • Start date Start date Dec 28, 2008
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Next
First Prev 4 of 7 Next Last

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Dec 29, 2008
#61
  • Dec 29, 2008
  • #61
I am still very sad over this.



It is a nice looking SVT, enjoy.




Fox for lyfe!
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Dec 29, 2008
#62
  • Dec 29, 2008
  • #62
All the IRS cover brace does is keep you from cracking the Diff cover. At your power level you need it ASAP! Even at stock power levels they need the cover as it flexes enough to leak

To help with wheel hop on a Cobra you need the derlin diff bushings and better springs/shocks. I have never had wheel hop in mine and I have smoked the hell out of the tires. My 03 Vert I had in Hawaii had seriously bad wheel hop with the Goodyears and stock suspension.
Go to SVT Perfrmance and look up "red pill" and "blue pill". It is the whole kit for stopping wheel hop on IRS Cobras

You really need the oil PCV filter kit too. Your intake will inhale ALOT of oil otherwise. Kevin has to empty his every 300 miles with his twin screw
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 29, 2008
#63
  • Dec 29, 2008
  • #63
Hmmm...sounds good, thanks Laser. My friend had an inline oil seperator on his Lightning. Where can I buy a kit like that??

I wonder if I could install those bushings myself? Does the differential have to come out, or can it stay in the car?


BTW...I just took it for a ride. It was dry today, I took two friends with me and I still have the 100 pounds of sand bags in the trunk. It still would not hook in 1st or second, but on the freeway I got to hammer on 3rd and 4th and man does it pull!! I was very impressed. It got past 100MPH too fast though...haha...I didn't even get to enjoy the pull because it got there so fast....hahaha
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Dec 29, 2008
#64
  • Dec 29, 2008
  • #64
SVT32VDOHC said:
Hmmm...sounds good, thanks Laser. My friend had an inline oil seperator on his Lightning. Where can I buy a kit like that??
Click to expand...

You can get them on Ebay they're like $40...or you can build it yourself from parts at Home Depot for about half that. The filter itself is just a water separator that you would used on an air compressor. All you need to do is get the correct barbed fittings for it to attach to your PCV hose and you're set.

Voila....

http://ocnav.com/cars/oil_separator.html
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 29, 2008
#65
  • Dec 29, 2008
  • #65
Thanks 101. I guess I could just build one. You put it inbetween the PCV line right?
 

Cobra912

Active Member
May 1, 2005
1,777
11
39
Wish I was anywhere but here
Dec 29, 2008
#66
  • Dec 29, 2008
  • #66
Sigh.......well I'm currently listing all my kids toys on Ebay. If I sell everything including my 86, take a second job, the wife a second job, and cash in the kids education savings I might be able to get a Terminator...........

My wife says I can get one (wanted a 2003 since the day they came out) if I can come up with the cash........she didn't say how
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Dec 29, 2008
#67
  • Dec 29, 2008
  • #67
I'd love a termi too - I'd sell both of my Stangs in a heartbeat if I could afford one...maybe in another 10 years me thinks?
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Dec 29, 2008
#68
  • Dec 29, 2008
  • #68
SVT32VDOHC said:
Hmmm...sounds good, thanks Laser. My friend had an inline oil seperator on his Lightning. Where can I buy a kit like that??

I wonder if I could install those bushings myself? Does the differential have to come out, or can it stay in the car?


BTW...I just took it for a ride. It was dry today, I took two friends with me and I still have the 100 pounds of sand bags in the trunk. It still would not hook in 1st or second, but on the freeway I got to hammer on 3rd and 4th and man does it pull!! I was very impressed. It got past 100MPH too fast though...haha...I didn't even get to enjoy the pull because it got there so fast....hahaha
Click to expand...
Yeah, its funny cause its something I never thought i would complaine about but its true. The car accelerates so fast from 50-130 that you dont really have time to enjoy it

I shopped for the seperator for a while. I looked at the cheap ones on ebay and looked at building one and saw the one at LMR. I didnt care for any of them and I have no skills to make a nice bracket so I ordered the one from Steeda. They were the only ones that had it in stock too. Steeda Oil Separator - Ford Mustang
It has a nice clean look, I saw 04sleepers in person and I liked it

Forgot, if it gets warm where you are at then you NEED the head cooling mod if you are planning on driving her hard. You are not supposed to do WOT runs in 5th or 6th without the head coolong mod. Evenflo just came out with one that dosent require you to drop the transmition to install. It adds a new cooling hose to the back of the drivers side head where there isnt any flow from the factory so it causes hot spots. The tolerences on the Termi block are so tight that the piston expands enough to sieze the engine unless there is better cooling for cylinders 7 & 8. Just gota remove the blower and there is a fitting that gets installed. No cutting (besides the rad hose) or drilling

The differental is super easy to remove on these cars if you have a lift but you dont need to for replacing thoes bushings. You do need to remove thoes bushings to move the diff back enough to install the IRS brace so thats a good time to swap them. Four bolts is all it takes to mave the pumpkin back to install both parts. The two that also hold the derlin bushings and the two on the end of the diff cover where the IRS brace reinforces it. When you get under the car and see how the cover is braced you can see where it would crack at. Its just not thick enough.

eBay has the IRS brace in the same red as you car for $179 but I just bought the Steeda one cause a dude in Ennis had it for $125

View attachment 281858
View attachment 281860
Hope it helps
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 29, 2008
#69
  • Dec 29, 2008
  • #69
Thanks Laser. I looked on Steeda's site and it looks like they have the best offerings of IRS parts. They have the carrier bushings, subframe bushings and the control arm bushings available. I am thinking of getting the carrier bushings and the subframe bushings, but I might skip out of the control arm bushings.

http://www.steeda.com/products/cobra_diff_bushings.php
http://www.steeda.com/products/cobra_diff_bushings.php
http://www.steeda.com/products/cobra_rear_irs_control_arm_bush.php

Do you have these bushings in your Termi? If so, did you need a press to remove them? And it looks like you do have to remove the carrier bolts to move it back to slip the IRS brace into position? I do have a hoist at work and all tools if needed.

And as far as the head cooling mod...I have also read that the 04's have better heads than the 03. Ford was supposed to correct the cooling problem on the 04's.
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Dec 29, 2008
#70
  • Dec 29, 2008
  • #70
The head thing is a myth. People say if it has blue paint on it then its the better heads. I fell for it 03/04 heads are IDENTICAL but there may have been a different seal for the valve guides that stands up to a higher heat. U.M. had his heads replaced two or three times and it still came back. He did the head cooling mod and never had an issue. If its warm out though you could just not pull 5th or 6th and save the $120 I dont have that mod yet but will buy it in spring.

Things I learned that are a MUST for these cars in the countless hours of research I have done are : Head cooling, IRS brace, oil PCV filter and derlin bushings. That covers most of Fords weak spots in the car.

I dont have the sub frame or controll arm bushings eaither. Them, the cooling mod and a twin screw are the only mods left to do on my car and I would like to have things to look foreward to do to the car.... if that makes any sense
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Dec 29, 2008
#71
  • Dec 29, 2008
  • #71
Nice purchase. I agree with your decision, as the Termi has all I would ever want in a Mustang. Enjoy!
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 29, 2008
#72
  • Dec 29, 2008
  • #72
Hmm...UM went as far as having his heads replaced? That sucks. I don't think I'm doing that cooling mod. Pulling 5th and 6th gear WOT would give you speeds of 140-160MPH....that I don't need to do.

I am getting ahead of myself with all this bushing talk too. I won't get it on the hoist at work til the spring. First mod is the Nitto's and the shorter handle to go with the Hurst shifter. I will see how the car does with the Nitto's and warm weather and go from there. I need to get a good look at the IRS and see what is involved for installing this stuff.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Dec 29, 2008
#73
  • Dec 29, 2008
  • #73
love the cobra. =] how much you get for hackjob? was a damnnn nice coupe.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 29, 2008
#74
  • Dec 29, 2008
  • #74
ryan218 said:
love the cobra. =] how much you get for hackjob? was a damnnn nice coupe.
Click to expand...

Thanks Ryan. I didn't get enough for Hack Job to cover the Cobra, but I got enough to make me sell it.
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Dec 29, 2008
#75
  • Dec 29, 2008
  • #75
SVT32VDOHC said:
Thanks Ryan. I didn't get enough for Hack Job to cover the Cobra, but I got enough to make me sell it.
Click to expand...
Great answer
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Dec 29, 2008
#76
  • Dec 29, 2008
  • #76
SVT32VDOHC said:
Thanks Ryan. I didn't get enough for Hack Job to cover the Cobra, but I got enough to make me sell it.
Click to expand...

13,500?
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Dec 29, 2008
#77
  • Dec 29, 2008
  • #77
Ryan he gave you a polite "I am not answering that so frack off!" answer
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Dec 29, 2008
#78
  • Dec 29, 2008
  • #78
we deserve to know!!!!!!!!!!!!!!!!
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Dec 29, 2008
#79
  • Dec 29, 2008
  • #79
Laser....How many miles are on your Cobra?
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Dec 29, 2008
#80
  • Dec 29, 2008
  • #80
9x yours
 
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Next
First Prev 4 of 7 Next Last
You must log in or register to reply here.

Similar threads

R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
181
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?