Identifying a KC clutch?

wytstang · Feb 1, 2006

My KC clutch just showed up so natuarlly I inspected it. It doesn't have any marking indicating what it is . I was lookig for a Valeo marking or anything it's just plain. I picked it up from (Dynamic Racings) ebay store and showed up in a plain FedEx box.
View attachment 489004

View attachment 489010

215what · Feb 1, 2006

Did it come in ford racing box in side of the fedx box? Part # is-m-7560a302

HISSIN50 · Feb 1, 2006

Danny, you might want to toss a thread up on the Corral in Gen Stang tech. There has been scuttlebutt over there about some KC's not being Valeos, and some of those guys might know specifically what to look for.

It reminds me of when my sis had a VW and some of the Sachs stuff came from Europe and some Mexico. I looked at every box for where it came from.............

Good luck Danny.

HISSIN50 · Feb 1, 2006

Or maybe call D&D in Wixom and ask them how one knows..................

wytstang · Feb 1, 2006

HISSIN50 said:
Or maybe call D&D in Wixom and ask them how one knows..................

Already did that and they said there is nothing on there that will determine if it is real. There is no marking (#'s, symbol, etc.) to verify it. They also said ALL KC clutches and or Ford racing are made by Valeo I'll go by what D&D say they would know. I remember reading about notches in the fingers, then I found this:

Astro Performance said:
Our King Cobra Clutch features a "Light Pedal Pressure" unlike that of Competitors! King Cobra Clutch Kits are not determined by having "Notches/Grooves" in Fingers. This does not determine the "Pedal Pressure" of the Clutch Plate. It does however determine the "Clamping Force". The Pedal Pressure is determined by the "Fulcrum" Point in the Pressure Plate. A True King Cobra has a "Clamp Load" of 1,820 Ft. Lbs. The Higher the "Clamp Load" Rating, the "Heavier" Pedal Pressure. Be cautious of other competitors selling King Cobra's with Higher "Clamp Load" than 1,820!!

Did it come in ford racing box in side of the fedx box?

Negative just the fedex box thats what kinda what triggered my interest for looking for marks. I have no reason to believe it's not a KC clutch was just looking for #'s because it was just in the box not a ford racing anything or hint of it being KC.

HISSIN50 · Feb 1, 2006

Danny, I am with you all the way with going with what D&D/The Walshes think. I would feel ok with it then - not a whole lot else to do.

OH, and thanks for sharing what was said. I guess we can nip the internet rumor in the bud......

wytstang · Feb 1, 2006

Yup when he said they were all made by Valeo that's all I needed to here. But check out what Dynamic Racing says (I'm getting confuses)

DynamicRacing said:
OTHER SELLERS ADVERTISE WHAT THEY CALL A " KING COBRA " THAT IS ACTUALY A " LUK " HEAVY DUTY OR OTHER CHEAPER QUALITY ITEM AND DOES NOT HAVE A LIGHT PEDAL PRESSURE PLATE ..ALSO DOES NOT SHOW ACTUAL ITEM IN THE PICTURE..THEY ARE USING A VALEO PICTURE AND VALEO NO LONGER MAKES THIS STYLE CLUTCH " THATS CALLED FRAUD "

They also say this

DR said:
A REAL KING COBRA WILL HAVE A NOTCH INDENTED INTO THE PRESSUE PLATE FINGERS " SEE PICTURE BELOW "

http://cgi.ebay.com/ebaymotors/KING...33730QQitemZ8033312900QQrdZ1QQsspagenameZWDVW

HISSIN50 · Feb 1, 2006

Danny, I am confused too. I did some generic internet searching and didnt find much in the way of people saying that Valeo was not making the KC.

AFAIK, Diversified is pure Ford and the PP looks the same to me. Does your disk have any nomenclature on it? In lookin at their picture here, the disk looked like it has something printed on it.

I bet you will be fine with it. Who knows what we are really getting with these things (people complained when ford switched the OEM style fox clutch cables to being made overseas, but they have held up great).

Sorry to not have better info.

wytstang · Feb 2, 2006

HISSIN50 said:
Danny, I am confused too. I did some generic internet searching and didnt find much in the way of people saying that Valeo was not making the KC.

AFAIK, Diversified is pure Ford and the PP looks the same to me. Does your disk have any nomenclature on it? In lookin at their picture here, the disk looked like it has something printed on it.

I bet you will be fine with it. Who knows what we are really getting with these things (people complained when ford switched the OEM style fox clutch cables to being made overseas, but they have held up great).

Sorry to not have better info.

Nope nothing on here just a plain disk and pressure plate. I'll just break it in then drive it like I stole it. Just doing some snooping to find the facts, like I said I have no reason to doubt them just curious by nature.

VibrantRedGT · Feb 2, 2006

That clutch doesn't look like the KC I bought years ago. Not sure if the changed the way it looks now days. Mine said Valeo all over it.

wytstang · Feb 2, 2006

Vib have you heard anything good/bad about DynamicRacing (in Plantation)? Thats who I got my clutch cobra from
http://cgi.ebay.com/ebaymotors/KING...ryZ33733QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

VibrantRedGT · Feb 2, 2006

I've heard of them and know they have a million EBAY auctions but never purchased anything from them. May want to take/send it back if you can.

wytstang · Feb 2, 2006

Not an option for me at this point this has to be done by next week. That's not enough time to have it sent back wait for refund then turn around and buy another one. The cars being sneaked into my local ford dealer ship to have the work done dirt cheap.

215what · Feb 2, 2006

I just looked at my king cobra (it's been sitn in my room for months)

On the pressure plate it's stamp to time's one ford other valeo
On the disc It's stamped once valeo. I got the from dallas mustang.

wytstang · Feb 2, 2006

Now I'm getting worried and some what pissed very pissed. But D&D said there is no way of tell what clutch with out a part number (no marking or anything). 215what could/would you do me a huge favor an call D&D and ask them how to identify a KC cluth (marking or what not) 248-735-6220 or anybody for that fact.

BDAWK2002 · Feb 2, 2006

Here's my king cobra.I just took it out of my car,i bought it from 50 resto and it came in a ford motosport box.It's got some markings in the center.

wytstang · Feb 2, 2006

See the picture I've been see have the blue springs with the light center peice. If I have to drive to Plantation there going to be hell the pay.

215what · Feb 2, 2006

I called D&D they put me on hold for ever so I hung up. on my disc the springs
are purple has the # e5zm-7550-a302h af3 on the fly wheel side. stamp valeo on the other side. wtf

wytstang · Feb 2, 2006

I really appreciate you calling 215what thank you. I'm going to call other shops and see if they can add some info. I also sent this thread to dynamic racing to see if they can shed some light on this subject.

Grn92LX · Feb 2, 2006

My old king cobra disk looked like what Bdawk2002 posted. I got it from d&d.

Fyi, my promotion powertrain blueprinted motorsport HD pressure plate doesn't have the notches in the fingers.

Identifying a KC clutch?

Mustang Master

Attachments

New Member

"How long does it take to get help in here?

"How long does it take to get help in here?

Mustang Master

"How long does it take to get help in here?

Mustang Master

"How long does it take to get help in here?

Mustang Master

"STANGNET'S PENGUIN SMACKER"

Mustang Master

"STANGNET'S PENGUIN SMACKER"

Mustang Master

New Member

Mustang Master

New Member

Attachments

Mustang Master

New Member

Mustang Master

Fidanza Man!

Similar threads

Privacy & Transparency

Privacy & Transparency