I am looking for some injectors. I only need 19# injectors. My engine has 154,000 miles on it and am going to change the injectors the same time I will change my intake. My question is I know the yellowish (or orange) injectors are 19# one's. But I notice the bottom of the injectors are painted black or silver or tan. Is there a difference?? Is one injector a single stream spray and the others ar 3 stream (or spray pattern)?? I am trying to cross Crown Vic's 19# injectors and by the book they won't cross for my 93 GT Mustang. Does anybody know the scoop with them?? I heard the Ford Racing 19# one's have a 3 spray pattern.
Injector questions. Color- what works??
- Thread starter winder
- Start date
Pintle pin, 4 hole spray and 3 hole spray are all the same in terms of flow. If it is tan or orange it's 19 lbs. I had 5 injectors with a pintle pin and 3 injectors with 4 holes on mine before I swapped out the stock manifold for an Explorer one.
Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit. The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:
http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/
Most of the links above have store locators for find a store in your area.
Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit. The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:
http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/
Most of the links above have store locators for find a store in your area.
I am trying to figure this out- On my injectors there is a pin sticking out on the bottom (called the pinicle pin right)? The metal plate that the pin has on it has the 3 or 4 holes (very small) in it that makes the spray pattern?? I remember seeing a test on a OEM 19# ford injector- it only has a steady straight stream- not a spray pattern. I am trying to get a spray pattern and want to get injectors that have that pattern. Do they come on newer cars or is it only avail. from the Ford Racing injectors.
BlackFox5.0
Founding Member
Similar threads
