Injector Size

erics3000

New Member
Feb 3, 2015
4
0
1
I just got a new project car. The car runs rich its pretty stock and has mass air calibrated for 30 lb injectors but I think the car has 19 lb newer style. I am not too familiar with the newer ones but i remember the older blues were 24 and reds 30. These look more like yellow is orange. What do you guys think?
IMG_0310.webp
 

Attachments

  • IMG_0311.webp
    IMG_0311.webp
    555.9 KB · Views: 230
  • IMG_0312.webp
    IMG_0312.webp
    576.3 KB · Views: 244
That is typical of what a 19LB injector looks like after years of heat and exposure to gasoline.
As a91what has said, a 30 LB calibrated MAF will result in a lean mixture when used with 19 LB injectors.

Dum the codes and see what you get; codes 41, 42, 43, 91 and 92w ill tell you if there are air/fuel ratio management issues.

Dump codes sticky

Look at the top of the 5.0 Tech forum where the sticky threads are posted. One of them is how to dump the computer codes. Codes may be present even if the CEL (Check Engine Light) isn’t on. You don’t need a code reader or scanner – all you need is a paper clip, or if your lady friend has a hair pin, that will do the job.
I highly suggest that you read it and follow the instructions to dump the codes. http://www.stangnet.com/mustang-forums/threads/how-to-pull-codes-from-eec4.889006/
 
Last edited: