Installing a Tremec TKO 600. A question about the tranny mount.

BONE_STOCK

Member

Jun 28, 2003

69

0

6

North Carolina

Apr 22, 2005

#1

• Apr 22, 2005

• #1

Hey guys. I tried the search but couldn't find what I was looking for.

I have the stock tranny out of my 04 Mach 1.

Now I'm about to install the Fidanza flywheel and clutch stuff and Lakewood bellhousing.
Now when I bolt the tranny up. Will the stock tranny mount/ crossmember work? Or do I need to do some modifications? And if I do what are they?

Thanks alot for your time,
Mike

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 22, 2005

#2

• Apr 22, 2005

• #2

It really depends how the tranny sits.. When I replaced mine, neutral center is high and to the right. So, the driveshaft rubbed the body... I had to cut out some space for the driveshaft to clear, but could have altered the trans. cross member as well. If I was to do it again, I'd alter the cross member..

 

S

showstopper2

Founding Member

Apr 16, 2001

425

0

0

New Bedford, Ma.

Apr 22, 2005

#3

• Apr 22, 2005

• #3

some people say you need to flip the crossmember around and redrill the holes for the mount. I have been trying to figure this out too since I will be installing that same setup in my car hopefully next spring. Modular Depot has some good info on it about the swap as does Modular Powerhouse.

 

BONE_STOCK

Member

Jun 28, 2003

69

0

6

North Carolina

Apr 22, 2005

#4

• Apr 22, 2005

• #4

Cool. Thanks guys.
Oh do you know where I can get a plug for the mechanical speed sensor?

 

S

showstopper2

Founding Member

Apr 16, 2001

425

0

0

New Bedford, Ma.

Apr 22, 2005

#5

• Apr 22, 2005

• #5

steeda makes it.

 

BONE_STOCK

Member

Jun 28, 2003

69

0

6

North Carolina

Apr 23, 2005

#6

• Apr 23, 2005

• #6

showstopper2 said:

steeda makes it.

Click to expand...

Your the man!!