• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Intake Advice

  • Thread starter Thread starter Waz900
  • Start date Start date Jun 18, 2007

Waz900

Member
Apr 22, 2005
41
4
18
Sewell, New Jersey
Jun 18, 2007
#1
  • Jun 18, 2007
  • #1
Hey Guys,
Here's what I am wondering. At this point my 5.0 doesn't really have that many mods on it, but it will down the road. I am looking into buying an upper/lower intake and i'm not sure which one to get. I was going to get the cobra intake, but if I eventually do too many mods I might have to swap it out anyway. I am looking at the Trick Flow Street Heat intake setup. The only thing that bugs me about that is that the TB opening is 75mm. If I put that on my for the most part stock car will that hurt my performance or will there be no problem, just not as much of a gain without the other mods? Thanks in advance.
 
S

smallstang393

Member
Oct 18, 2004
75
0
6
Jun 18, 2007
#2
  • Jun 18, 2007
  • #2
Don't worry about the 75mm opening because your TB is whats going to flow not the opening. It should hurt your performance but you won't see as much of a gain as it's potential because of the stock heads but once you change heads and cam so you can get some airflow then she'll wake up
 

trailblazr81

Member
May 17, 2003
571
0
16
Hollister, Cali
Jun 18, 2007
#3
  • Jun 18, 2007
  • #3
Do you have a plan and know your mods for the future? The Cobra and Explorer intakes are good for 350-400HP. Maybe look for an explorer intake and do a little work to it?
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jun 18, 2007
#4
  • Jun 18, 2007
  • #4
The GT40/cobra/Explorer are great options for a stock and mid built motor. You can get it ported if needed later on too. Another good option is the Edelbrock Performer intake. All of the intakes above will improve your power without killing your low end. TFS/Holley/Performer RPM will pretty much kill your low end torque without a set of heads to back them up.
Kevin
 
You must log in or register to reply here.

Similar threads

D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
457
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
406
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
SOLD Trick Flow Box R Series Upper Intake w/90 mm Inlet
  • Habu135
  • Apr 30, 2026
  • Engine and Power Adder
Replies
2
Views
400
Engine and Power Adder Aug 19, 2026
Habu135
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?