Is A Head, Cam And Vortech Safe On A Stock Bottom?

Bob Hughes said:

It would just seem to make sense if someone is planning on dropping that kind of money and looking to make horsepower you would want it on the ground....if you want a tire spinner just change ur gears and call it a day. And its not like a 4 banger with a turbo that makes 380hp and 250 ft lbs of torque....our numbers are pretty close in comparison

Click to expand...

While this is for the most part true, the rate at which it's delivered is going to vary. A Centrifugal blown 2V isn't going to apply it nearly as early or violently as one running a Positive Displacement blower or nitrous. Even most turbo set ups are going to have a measurable enough amount of lag before the power comes on to save most drivetrain components from the kind of shock only two screws/rotors or a healthy shot of giggle gas can put out.

Step over to the 5.0L OHV crowd. There are plenty of guys with stock T5's with torque capacities far inferior to the TR3650 living long, long lives behind blown and/or stroked 300-500hp engines.

Like I said....it's all in how it's put to the pavement. The harder it pours on, the harder it's going to be on drivetrain parts.

I'm not saying it isn't a good idea.....just that I wouldn't put it near the top of my list of priorities unless one was planning to see a lot of track use, or continuously drive the supreme hell out of their car. In which case the entire drivetrain should be addressed....not just the transmission.