• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Is it possible to smoke the tires in 3rd gear?

  • Thread starter Thread starter Nobody
  • Start date Start date Apr 15, 2004
  • 1
  • 2
Next
1 of 2 Next Last
N

Nobody

Founding Member
May 9, 2000
2,515
0
0
Kenmore, WA
Apr 15, 2004
#1
  • Apr 15, 2004
  • #1
How much power does it take for our cars to smoke the tires on a 2-3 shift on decent street tires? Who can do this and what kind of power adder do you have?

Thanks
 

S/CBlack95GT

New Member
Apr 6, 2003
2,018
0
0
Tampa Palms, FL
Apr 15, 2004
#2
  • Apr 15, 2004
  • #2
Mine will do it easily on a shift. I can even feel mine breaking loose at WOT near 5000rpms in 3rd. That is kind of scary!
 

Ethereal Zer0

Founding Member
Sep 26, 2002
1,880
3
39
Everett, WA
Apr 15, 2004
#3
  • Apr 15, 2004
  • #3
Nobody said:
How much power does it take for our cars to smoke the tires on a 2-3 shift on decent street tires? Who can do this and what kind of power adder do you have?

Thanks
Click to expand...

Neal (Slapper) who comes out to BM sometimes can break them loose in all 5 gears....its fu*king sick.... He is pushing 560rwhp though
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Apr 15, 2004
#4
  • Apr 15, 2004
  • #4
Ethereal Zer0 said:
Neal (Slapper) who comes out to BM sometimes can break them loose in all 5 gears....its fu*king sick.... He is pushing 560rwhp though
Click to expand...



:worship: :worship: Man...at 19 i hope one day i get to that level of HP....
 

moneypit94

Active Member
May 23, 2003
1,723
2
39
Macomb, IL
Apr 15, 2004
#5
  • Apr 15, 2004
  • #5
hmmm... Thats interesting... I can bearly break the tires in second. Thats from like a 2,000 rpm start... Im like totally in love with my nitto drags now... It pulls like freaking crazy and about 4500 rpms you feel all kinds of squirly...
 
N

Nobody

Founding Member
May 9, 2000
2,515
0
0
Kenmore, WA
Apr 15, 2004
#6
  • Apr 15, 2004
  • #6
okay okay yeah if you have gobs of power sure you can. Is it possible with an S-trim with 8lbs of boost? Can it be done with a Kenne Bell at 6psi?
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Apr 15, 2004
#7
  • Apr 15, 2004
  • #7
If you're spinning you aint winning

who gives a crap, my car with 246 would spin into 3rd gear on the street. That means nothing

Now with nittos if they are hot will hook up in first, if cold spin some in 2nd.

again spinning = bad
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Apr 15, 2004
#8
  • Apr 15, 2004
  • #8
95snoozer said:
If your spinning you aint winning

who gives a crap, my car with 246 would spin into 3rd gear on the street. That means nothing

Now with nittos if they are hot will hook up in first, if cold spin some in 2nd.

again spinning = bad
Click to expand...


I agree, if you want to spin that bad, throw some narrow little civic tires on the back. You could probably spin into 4th. Dont worry about spinning, if you are not then its better for you but if you are, you know you have more things to buy.

Besides, its safer. I would be scared of the feeling of getting sideways or close to it going 60-70 mph...if not faster
 

moneypit94

Active Member
May 23, 2003
1,723
2
39
Macomb, IL
Apr 15, 2004
#9
  • Apr 15, 2004
  • #9
he beat me too it

snoozer brought up a good point. you could put some cheap thin tires on there and spin all the time. When you put some decent wide tires on there and spin that means you have power... power that isn't going to the ground though... I personally don't like to do anything harsh in 3rd myself... that is the problem gear in the T-5 and im still going on my stock one...
 

btracer02

Member
Dec 25, 2003
146
0
16
coatesville, PA
Apr 15, 2004
#10
  • Apr 15, 2004
  • #10
i can chirp third hard on my goodyear daily driver tires (245/40/17) easily, if i spun second up to about 6g and dumped it into third im pretty sure i could smoke third gear... but i bought the nittos so that would never happen now
 

cb18201

New Member
Oct 25, 2003
1,140
0
0
CT
Apr 15, 2004
#11
  • Apr 15, 2004
  • #11
with my gears i can spin into 4th if i wanted to.
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Apr 15, 2004
#12
  • Apr 15, 2004
  • #12
What about doing a burnout in 3rd gear at the track? What kind of power would be needed for that?
 
Y

yellow1995Cobra

New Member
Dec 23, 2002
2,959
2
0
Massachusetts
Apr 15, 2004
#13
  • Apr 15, 2004
  • #13
I was spinning tire at WOT in 3rd gear, at low RPM's to....on nitto DR's.. Then boom and bye bye HG! Tomorrow im getting it tuned though, so we will see what gears i can break the tires loose in for sure..
 
N

Nobody

Founding Member
May 9, 2000
2,515
0
0
Kenmore, WA
Apr 16, 2004
#14
  • Apr 16, 2004
  • #14
cb18201 said:
with my gears i can spin into 4th if i wanted to.
Click to expand...

WOW! 4:30 gears with a 5-speed? That's hardcore. Do you have a 2.95 1st gear?
 

1slow95

Founding Member
May 16, 2002
1,797
3
48
ohio
Apr 16, 2004
#15
  • Apr 16, 2004
  • #15
Well, I used to be able to to chirp third with my old tires. 315's put a stop to that! Now I can barely spin in first.....and I love it!
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Apr 16, 2004
#16
  • Apr 16, 2004
  • #16
1105 said:
What about doing a burnout in 3rd gear at the track? What kind of power would be needed for that?
Click to expand...
It's not so much power as it is gearing. A 4.30 would do a 3rd gear burnout, a 4.10 might. I've tried it with my 3.73s and it will turn the tires over a few times and then the rev's get killed. My car doesn't have enough ass to spin 'em in 3rd. Torque spins the tires. The steeper the gear, the easier it becomes.

Joe
 
D

drunkinamustang

New Member
Apr 2, 2004
53
0
0
tx
Apr 16, 2004
#17
  • Apr 16, 2004
  • #17
Its all about the clutch, In a stock 95 I was able to chrip the hell outta first second and third after putting a Duel Centerforce Clutch. but after putting 4.10s in that car it would bark 4th.

Duel Centerforce Clutches are the ****s, use too I loose ground shifting on that ****ty ass 10.5, now when I grab a gear the car lunges out and dont loose any RPMs.
 

302fordracer

New Member
Mar 27, 2004
738
0
0
Vancouver, WA
Apr 16, 2004
#18
  • Apr 16, 2004
  • #18
I agree with some of the above mentioned people...I think it would be better to have tires that can handle the power and make you faster rather than showbaoting with wheel spin...that is borderline ricer mentality...it is about actually having the power not making people think that you have it!!
 
N

Nobody

Founding Member
May 9, 2000
2,515
0
0
Kenmore, WA
Apr 16, 2004
#19
  • Apr 16, 2004
  • #19
I am sure you all have seen the Lingenfelter video. That guy was not a ricer and he was smoking his street tires in third gear at will. With a pair of DR's he wouldn't have that problem. I wouldn't call it rice if you had the power to do so. Civic tires in the rear is rice. Smoking in third because you have the torque means you need more traction. Since when does that mean you are a ricer?
 

Badlilstang

Founding Member
Feb 21, 2001
1,606
0
37
Spring , Texas
Apr 16, 2004
#20
  • Apr 16, 2004
  • #20
Depends on tires and pavement.. I can usually spin going into 3rd but tires are already smoking fron 1st and 2nd... now if your talking about being and third gear and just nailing it my 331 wont do it but my 410ci in my 92 will light them up doing 80 on the freeway. Power is useless if you cant get it down to the ground but it sure can intimidate the ppl who dont know any better.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
437
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
781
Fox 5.0 Mustang Tech Jun 14, 2026
Mindseye007
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
H
New Built 91 Foxbody electrical failure. Need help
  • hassler
  • Aug 18, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
489
Fox 5.0 Mustang Tech Aug 21, 2025
limp
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
208
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?