• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Is there a rubber plug on a BBK Cold Air Induction???

  • Thread starter Thread starter grantur01
  • Start date Start date May 11, 2005

grantur01

Founding Member
Nov 7, 2001
226
0
16
Dayton, OH
May 11, 2005
#1
  • May 11, 2005
  • #1
Hi, i was changing my spark plugs today and i took my BBK cold air off for easier access and when i was done and putting the tube back on there was a hole in the side of the tube. It had a rubber "outing" to it. Later I saw a little rubber plug in the driveway. So my question is for those of you that have the bbk cold airs. Do you have a black rubber plug on the opposite side of the vaccum hoses??? I couldn't hardly get the rubber plug back in place so i just taped around the tube to close the hole up for now. thanks in advance
 

Barrier

New Member
May 11, 2005
155
0
0
May 11, 2005
#2
  • May 11, 2005
  • #2
That hole's for your 02 sensor... the only prob I could think of would be if something flew in the hole and up through the intake, but it's small and thats quite unlikely to happen... I'd just plug your stock 02 sensor into it if I were you.
 

jrc_03_gt

New Member
Jan 1, 2004
786
3
0
May 11, 2005
#3
  • May 11, 2005
  • #3
I dont have a o2 sensor there I thought it was for a nitrous application.
 

grantur01

Founding Member
Nov 7, 2001
226
0
16
Dayton, OH
May 11, 2005
#4
  • May 11, 2005
  • #4
02 Sensor??? on the bbk cold air??? Am i missing somthing
 
K

kovacs22

Founding Member
Jul 7, 2002
380
0
0
Milan Michigan (Ann Arbor)
May 11, 2005
#5
  • May 11, 2005
  • #5
IAT sensor i belive (Intake Air temp) sensor....but maybe im wrong, if thats already hooked up then perhaps its a pre plumbed nitrous fitting...
 

Barrier

New Member
May 11, 2005
155
0
0
May 11, 2005
#6
  • May 11, 2005
  • #6
grantur01 said:
02 Sensor??? on the bbk cold air??? Am i missing somthing
Click to expand...

Meant the IAT sensor, but I'm not familiar with the BBK's, just talking about my experiences with intakes on the Stangs.
 
You must log in or register to reply here.

Similar threads

A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
696
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
943
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Keeps dying with new cold air intake
  • Creomod
  • Oct 27, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 30, 2024
Jarhead67
J
Engine Popping noise in the intake. Frustrated still.
  • esteban31065
  • Apr 6, 2025
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech May 23, 2025
gkomo
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
809
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?