Iskwezm's turbo kit

iskwezm · Oct 12, 2007

10secgoal said:
How much did you end up spending. I don't even know. I charged ya 1350 for the headers and what not. But you payed for the rest.

well heres the list:
headers-$1350
polished turbo-$670.00 shipped
Tial BOV and W/G- $440.00
Polished EV hat-$220
Turbo blanket(ordered)- $120
new exhaust 3"-$175- not including a 4" Borla i had laying around

plus misc. stuff.
add to that a fuel system and carb, i have about $2200 in parts

you do the math, i dont want to, but probably about 5K.................i didnt even have that

Hopefully it woun't go any higher than 450rwhp or so

im thinking higher

phast69 · Oct 12, 2007

You're on a stock block right?.....Next thread of yours will be ....oh **** I pushed it above 500 and now I have two halves of a block

Just playing.

That's what scares me about the turbo route on my semi stock bottom end. Not to mention the amount of money I'm gonna have to spend just to get it to handle the power.

Roll cage
Seats
Harnesses
New 5 leaf reverse springs
Adjustable shocks front and rear
620's in front
Caltracs
Fuel system
Carb
Shock tower bars
Subframe connectors and DS hoop
9" rear w/ a 3.25 or so gearing
TTII rears (17X9.5 w/ 6.38 BS so I'll have to probably get .75" spacers)
MT or Hoosier 275/40R17's for the rear.....
New radiator w/ new Spal dual blades
Colder plugs
Cometic HG's

I think that about covers it....oh and probably a B&M ratchet shifter instead of the stock '69 shifter. The C4 is already built to handle up to around 600 w/ a 2800 stall.

God this is gonna be expensive. 10sec....I hope you're still alive by the time I get around to ordering the kit

Here's the spreadsheet..... And to top it off that doesn't even include labor time or shipping costs....****...

iskwezm · Oct 12, 2007

thats nothing, ill show you a stack of reciepts for about $40k and agarage of extra parts...........................but dont tell my g/f that

phast69 · Oct 12, 2007

Well...that's not including all the **** I've already done to the Stang in about 8 years. I agree mine's probably easily in the 30-40 range and growing. Frickin ridiculous. Well I won't tell your g/f if you don't tell my fiance. Deal?

10secgoal · Oct 12, 2007

Don't worry too much about the power. This form is much easier than others on bottom ends. TONS of guys go 10's with bone stock everything in their motors. THe next 65 customer has a monte carlo bar also. I hate you guys.

10secgoal · Oct 12, 2007

Oh, the next onne also wants a stock hood. So I'll let you know. It'll probably fit with a low rise sinlge plain intake.

iskwezm · Oct 12, 2007

10secgoal said:
Oh, the next onne also wants a stock hood. So I'll let you know. It'll probably fit with a low rise sinlge plain intake.

who's the next one???

10secgoal · Oct 12, 2007

Hehe, I'll take pics. It's another good looking car. One of our other customers that came in every two days looking at yours. He didn't understand the whole speed thing. Thought 300 was enough for him. Took a ride in Rich's and that's was all it took. But when you spend 17g's in paint, you can just decide to drop that kinda money. It'll take a little while because he wants a little at a time so the wife doesn't figure it out. He gets cash from jobs. I swear, I'm gonna end up in a dumpster one day if this sneeking around junk keeps up. I'll throw some pics up later.

iskwezm · Oct 13, 2007

10secgoal said:
I swear, I'm gonna end up in a dumpster one day if this sneeking around junk keeps up.

If we make to the show Sunday, i wont point you out

phast69 · Oct 13, 2007

LOL. Well I'm hoping to go w/ a 3.5" cowl hood but then again...no one has pics of a '69 coupe w/ one.

As for speed....one thing I've learned in the horsepower realm of things....you'll never have enough to keep ya smiling but it takes very little to keep ya from dying.

10secgoal · Oct 13, 2007

iskwezm said:
If we make to the show Sunday, i wont point you out

Good, cause if I smell coolant when we dyno it, I'm turning it down a little. don't care if it's only 420rwhp.

mrmustangman357 · Oct 13, 2007

We are still waiting for vids

Also is there anything that can be done to the stock block to beef it up? Like a girdle in the valley pan or similar? I do recall talking to a super gas racer that had a fox in the 8s with a stock block. He said the cracking starts around the valley area and said he'd get about 30 passes out of a stock block till she blew up

Jimmys66 · Oct 13, 2007

I wish I could find it but I'll have to explain it. It kind of works like a turnbuckle in the valley.

You start by drilling 2 small holes in the valley, insert a pin into each hole and place each end of the turnbuckle over a pin. Then tighen the turnbuckle to apply tension to both the pins and thats it.

It seems overly simple, but I guess it works.

Hopefully someone will chime in with the name of it...

mrmustangman357 · Oct 13, 2007

yeah but does it work?

Jimmys66 · Oct 13, 2007

Who knows my little peanut motor won't crack a block.

This isn't the one I was thinking of but, you should get the idea.http://www.mrnitrous.com/valley_girdle-pro.htm

Jimmys66 · Oct 13, 2007

This one looks better.http://www.strokerkits.com/bvss.htm

mrmustangman357 · Oct 13, 2007

lol what a funny name like mr nitrous ha ha they may need the girdle

my 351w puts out about 450 hp and 500 ft lbs of torque and I take solice in knowing the beefier 351W block will take a little more than a 5.0L, but I was thinking of a couple turbos or an S trim hanging off the front. that may put it over the edge.. . . .

phast69 · Oct 14, 2007

From everything I've read over on Turbomustangs.com it sounds like a girdle is just a band aid and will simply hold your block together after it decides to crack...so you'd still be screwed. I just suggest running it til it breaks and then upgrading to a dart block.

iskwezm · Oct 14, 2007

i was thinking of getting one of those valley girdles, but the place i got my engine from said they are a joke................................ and he's a dealer for them too

brianj5600 · Oct 14, 2007

They start cracking at the top of the main. I don't see how strengthening the block above the cam would in any way help.

Iskwezm's turbo kit

iskwezm

phast69

New Member

Attachments

iskwezm

phast69

New Member

10secgoal

Active Member

10secgoal

Active Member

iskwezm

10secgoal

Active Member

iskwezm

phast69

New Member

10secgoal

Active Member

mrmustangman357

Member

Jimmys66

mrmustangman357

Member

Jimmys66

Jimmys66

mrmustangman357

Member

phast69

New Member

iskwezm

brianj5600

Active Member

Similar threads

Iskwezm's turbo kit

New Member

Attachments

New Member

Active Member

Active Member

Active Member

New Member

Active Member

Member

Member

Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency