• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

K&N Air cleaner performance kit?

  • Thread starter Thread starter parkgoons
  • Start date Start date Jun 13, 2006
P

parkgoons

New Member
Dec 28, 2005
76
0
0
Nevada
Jun 13, 2006
#1
  • Jun 13, 2006
  • #1
I just got my Pullies on and love the extra lower end power i picked up. So im looking for the next mod to do. Ive always been a fan of K&N i ran one on my Go-Ped when i was younger and on my dirtbikes. The clean a lot better than the stock ones, and also claim more HP. I was wondering if this
mod is worth the 199$ plus tax. Even if the kit isnt i still think ill get just the aircleaner. Mostly because they clean better than stock filters.
 

Superhereaux

chicks make me feel inadequate
Founding Member
Jul 30, 2002
538
3
59
42
South Texas
Jun 13, 2006
#2
  • Jun 13, 2006
  • #2
i've got that k&n kit you're looking at. it's probably the highest quality, nicest kit out there you can buy



would i buy it again? nope

just buy the filter and start saving up for more important things
 
P

parkgoons

New Member
Dec 28, 2005
76
0
0
Nevada
Jun 13, 2006
#3
  • Jun 13, 2006
  • #3
Thats some good info to know, i kind of wondered what the kit did that just the airfilter doesnt. Also roush makes one as well, it looks similar to the K&N kit does anyone have anything to say about that one? I see BBK makes a "cold air" one. If it really does "cool" the air running through it then it should make more power in theory.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jun 14, 2006
#4
  • Jun 14, 2006
  • #4
www.jlttruecoldair.com
 

loosescrew79

New Member
Dec 18, 2004
313
0
0
Jun 14, 2006
#5
  • Jun 14, 2006
  • #5
The kit is called cold air intake but it really does not COOL the air. All it does is take the air from inside the fender which in theory cooler because it is not in the hot engine compartment.

Most kits come with a metal intake tube which gets hot as hell. Therefore the air passing through it heats up.

Studys on the site have proven, you get the same performance results from a drop in K&N
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
64
Prattville, Alabama
Jun 14, 2006
#6
  • Jun 14, 2006
  • #6
When it comes to filtration a paper filter traps more debris than a K&N does. Not a lot more mind you, but a measurable amount more. It's a misnomer that the high-flow performance air filters like K&N are better than a quality paper filter.

http://www.bobistheoilguy.com/airfilter/airtest1.htm

U.M.

I run the K&N FIPK on my Cobra.
 

97vertstang

Member
Aug 17, 2005
85
0
6
40
fontana ca
Jun 14, 2006
#7
  • Jun 14, 2006
  • #7
buy the fipk.if u want it now ull want it later so why spend $50 on a k&n filter.i did and than replaced it, cause i wanted the fipk.i got lucky and got one on ebay for 72$ shipped.look around and get one used, many people change em cause they are not happy with what they have or change to kenne belle or so. also avoid the metal ones, get k&n, jlt,roush.but gears, plenum tb, and o/r h pipe make more power for same price.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jun 14, 2006
#8
  • Jun 14, 2006
  • #8
Uncle Meat said:
When it comes to filtration a paper filter traps more debris than a K&N does. Not a lot more mind you, but a measurable amount more. It's a misnomer that the high-flow performance air filters like K&N are better than a quality paper filter.



U.M.
Click to expand...

Yip, that's what I was going to say but you beat me to it!
 
H

Hornetsnest

New Member
Jul 9, 2005
150
0
0
47
San Diego, CA
Jun 14, 2006
#9
  • Jun 14, 2006
  • #9
loosescrew79 said:
Studys on the site have proven, you get the same performance results from a drop in K&N
Click to expand...
Studies are cool and all...But I gained 6rwhp going from just a drop-in to a full FIPK...So it worked great for me.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jun 15, 2006
#10
  • Jun 15, 2006
  • #10
Hornetsnest said:
Studies are cool and all...But I gained 6rwhp going from just a drop-in to a full FIPK...So it worked great for me.
Click to expand...

Did you correct the A/F ratio for the base run and again after the CAI install? If not, the extra 6hp may be from a slightly leaner A/F and not the CAI.
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
Jun 15, 2006
#11
  • Jun 15, 2006
  • #11
I have that exact kit. It's a year old. PM me, I'll sell it to you. I won't need it anymore with my supercharger.
 
H

Hornetsnest

New Member
Jul 9, 2005
150
0
0
47
San Diego, CA
Jun 15, 2006
#12
  • Jun 15, 2006
  • #12
CanadaStang said:
Did you correct the A/F ratio for the base run and again after the CAI install? If not, the extra 6hp may be from a slightly leaner A/F and not the CAI.
Click to expand...
True...It was a bit leaner, but not by much...I don't think the .7 would have gave me 6 extra horses though
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jun 15, 2006
#13
  • Jun 15, 2006
  • #13
Hornetsnest said:
True...It was a bit leaner, but not by much...I don't think the .7 would have gave me 6 extra horses though
Click to expand...

It's possible, depending on where the A/F was on the first run of course, but chances are good the CAI may pick up another couple HP once your car is out on the road and moving as opposed to just being strapped on a dyno.

Hmmm.......I'll have to try it on the G-tech in the HP mode to see I can pick up any noticable difference with and without the CAI and then try it with my big 9 inch filter. I've tried swapping them back and forth at the track but couldn't tell if there was a measurable difference.
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
64
Prattville, Alabama
Jun 16, 2006
#14
  • Jun 16, 2006
  • #14
Hornetsnest said:
True...It was a bit leaner, but not by much...I don't think the .7 would have gave me 6 extra horses though
Click to expand...
All depends on what the A/F was to begin with before the switch. It's very possible to make substantial gains just by leaning out the A/F ratio, even by as little as .7.

U.M.
 

langod

New Member
Apr 1, 2005
34
1
0
Londonderry, NH
Jun 16, 2006
#15
  • Jun 16, 2006
  • #15
I got 3rwhp from my FIPK Dyno'd before and after.

Worth it? No for HP gains, but yes for looks if that concerns you. As was stated above you'll do just as well HP wise, by just throwing in a K&N drop-in filter and taking out the air silencer.
 
P

parkgoons

New Member
Dec 28, 2005
76
0
0
Nevada
Jun 16, 2006
#16
  • Jun 16, 2006
  • #16
I purchased a K&N today from Kragen, I dont think it gave it much more noticable power but it was worth it. Where is the air silencer? I better leave it in considering im taking my car in monday to the dealership (this is the 30th time so far , not kidding).. The check engine light it on, and brake lights and blinkers are f:u:c:k,e,d up, Also for TSB#04-26-13... Does the air silencer really give me extra hp or is it one of those mods that only makes you feel faster?
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jun 16, 2006
#17
  • Jun 16, 2006
  • #17
parkgoons said:
I purchased a K&N today from Kragen, I dont think it gave it much more noticable power but it was worth it. Where is the air silencer? I better leave it in considering im taking my car in monday to the dealership (this is the 30th time so far , not kidding).. The check engine light it on, and brake lights and blinkers are f:u:c:k,e,d up, Also for TSB#04-26-13... Does the air silencer really give me extra hp or is it one of those mods that only makes you feel faster?
Click to expand...

http://musclemustangfastfords.com/tech/0205mmff_boltons/
 
P

parkgoons

New Member
Dec 28, 2005
76
0
0
Nevada
Jun 16, 2006
#18
  • Jun 16, 2006
  • #18
Thats awsome i cant believe they gained 4 rwhp from that free mod. Thanks for posting that article it gives me even more ideas.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
B
Screamin Demons Worth It N/A?
  • Blackout67
  • Oct 20, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
277
1996 - 2004 SN95 Mustang -General/Talk- Oct 20, 2025
Noobz347
  • Locked
SOLD Maximum Motorsports MMTR-2 Bumpsteer Kit - 1979 - 1993 Mustang
  • AeroCoupe
  • Apr 18, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
5
Views
617
Fox Body Mustangs For Sale (1979-93) Wednesday at 6:28 PM
AeroCoupe
G
New Owner: Very Clean 1991 GT Convertible. All original with 21k original Miles. How to make it better?
  • gvanginkel403
  • Oct 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
31
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 17, 2025
Jarhead67
J
Cold Air Intake options, is this filter fine or......
  • from6to8
  • Aug 10, 2024
  • 1994 - 1995 Specific Tech
  • 2
Replies
21
Views
2K
1994 - 1995 Specific Tech Sep 7, 2024
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?