Anytime that I have had issues with burning through header gaskets it has always been a symptom of the header bolts loosening up. I put a set of locking header bolts on and have never had a problem after that.
Anytime that I have had issues with burning through header gaskets it has always been a symptom of the header bolts loosening up. I put a set of locking header bolts on and have never had a problem after that.
felpro 1415's. they actually stick to the headers when they get heated up, kinda like they burn onto them, they always come off in one piece too.
I always run this gasket. even have a header bolt missing on one side and still no leaks. and my headers have individual tubes. The only time i had a leak was when the front drivers primary loosened up enough to where both of the bolts were halfway out, and it blew a tiny part of the gasket out.
iv had real good luck with those layered gaskets, i think its somethin like seal for sures. like 5 layers of metal, crush fit and re-useable, i used to burn thru felpros like crazy, but these have never leaked.. little spendy tho.