link me to some decent springs for at least 512ish lift...

[Foxfan88]

Heya guys, I bought some used thumper heads and the guy said that he would change the valve springs, so i am wondering, whats a good spring to use with them? i have B-cam with 1.7 rockers which should be around 512ish lift, not real sure.

I always get confused when looking at springs on the net. all the numbers they have, i dont know what all it means about how stiff they are or w/e


so if someone could link me to some springs that would be cool

thanks!

 

[RYC CUKR]

Here is the set I have on my p heads
http://store.summitracing.com/partd...-2500100&N=400098+4294863036+115&autoview=sku
Good to .540" of lift and has springs, retainers, locks, seals and shims

 

[bluevenom867]

^ thats a decent kit there.

But if you dont want to get the lock/retainers you can buy just springs for a little less.You want single springs with a damper.

 

[Foxfan88]

http://store.summitracing.com/partd...4294822607+4294791313+309227+115&autoview=sku

how about these guys!

 

[bluevenom867]

http://store.summitracing.com/partd...4294822607+4294791313+309227+115&autoview=sku

how about these guys!

They dont have the damper spring,but other than that pretty decent.

Try finding a weak double spring with damper,that would be the best IMO.

And that rate seems a little high from what trickflow says on thier website.

 

[thumper460]

Shoot me an email, and I'll set you up!! cool??

Tpr

 

[bluevenom867]

Shoot me an email, and I'll set you up!! cool??

Tpr

There you go foxfan