lookin for a quick answer...i know i should just search but....

VIPERn94Five-0 · Mar 24, 2004

alright a kid in my area just got a 94 GT....i told him i would make a homemade cold air for him...now he is gonna use the stock MAF...and ive only made one with my pro-m 80mm so i need to know what he will need other than the PVC and couplers....i know he will need the adapter and the UPR filter....but where can i scroe an adapter for him??

Anthony

VibrantRedGT · Mar 24, 2004

If he has a drop in K&N you can just use that. It has a steel backing plate built in. Just take the meter and trace the 4 bolts. Drill and bolt the meter to the filter. If he does not then buy a filter and adapter from UPR. Drill a hole for the ACT and use teflon tape when installing it. Use a 7/16 male adapter for the oil filler neck.

GTJake · Mar 24, 2004

You could try this combo...

http://uprproducts.com/shopping/shopexd.asp?id=406

http://uprproducts.com/shopping/shopexd.asp?id=393

Sorry, I forgot about it or I would have mentioned it in the PM.

Jake

VIPERn94Five-0 · Mar 24, 2004

VibrantRedGT said:
If he has a drop in K&N you can just use that. It has a steel backing plate built in. Just take the meter and trace the 4 bolts. Drill and bolt the meter to the filter. If he does not then buy a filter and adapter from UPR. Drill a hole for the ACT and use teflon tape when installing it. Use a 7/16 male adapter for the oil filler neck.

AH!! i have a drop in K&N just lying around....for some reason i didnt think it would work.....thanks Joe!

Anthony

lookin for a quick answer...i know i should just search but....

VIPERn94Five-0

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

GTJake

VIPERn94Five-0

Similar threads

lookin for a quick answer...i know i should just search but....

VIPERn94Five-0

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

GTJake

VIPERn94Five-0

Similar threads

Privacy & Transparency

Privacy & Transparency