• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Looking To Replace My Intake --with ???

  • Thread starter Thread starter BKM48198
  • Start date Start date May 24, 2017
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

BKM48198

15 Year Member
Jun 7, 2008
377
27
49
Ypsilanti, Michigan
May 24, 2017
#1
  • May 24, 2017
  • #1
I have TFS 170 heads and stage 1 cam, I'm looking to upgrade my intake with something better than the current Explorer intake. I have 24lb injectors and matching MAF , looking for what would be a good replacement for a daily driver type car, I'm not racing it. Anyone have any experience with the Professional Products intake, good or bad? Any other thoughts on a replacement intake that is good for a street car?
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
May 24, 2017
#2
  • May 24, 2017
  • #2
The PP intake is no better than the explorer intake. I would go with the systemaxx or the Edelbrock rpm.

Joe
 
Reactions: A5literMan and RaggedGT

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
May 24, 2017
#3
  • May 24, 2017
  • #3
send the explorer lower to Tom Moss for porting and it will outflow most aftermarket intakes.
 
Reactions: A5literMan, a91what and General karthief

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,733
6,716
214
Hillsborough county
May 24, 2017
#4
  • May 24, 2017
  • #4
Mike speaks the truth, the gt40 intake is what all aftermarket intakes are compared to... with a Tmoss port job the intake will really wake up.
 
Reactions: revhead347

Saberstang

Active Member
May 2, 2017
130
24
28
Atlanta, GA
May 25, 2017
#5
  • May 25, 2017
  • #5
RangerJoe said:
The PP intake is no better than the explorer intake. I would go with the systemaxx or the Edelbrock rpm.

Joe
Click to expand...
Yes, with the Professional Products intake manifold I have seen you will not get any better gains than the Explorer intake manifold. Also the Professional Products intake manifold is made in China. I would go with the Trickflow track heat intake manifold or the Edelbrock Performer intake manifold.
 
D

Deleted member 215073

May 25, 2017
#6
  • May 25, 2017
  • #6
How much does Tmoss charge to port lower Explorer intakes?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
May 25, 2017
#7
  • May 25, 2017
  • #7
I plan on running a Tmoss ported lower with my TFS 170 heads and Stage 1 cam with a 70 or 75mm TB.

I believe the explorer upper has a larger TB opening, and more plenum volume than the Cobra.

I guess the main question is what do you intend to do with the car? Race car where you want top end HP? Or street cruiser?
 
Last edited: May 25, 2017

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
May 25, 2017
#8
  • May 25, 2017
  • #8
JMGlasgow said:
How much does Tmoss charge to port lower Explorer intakes?
Click to expand...
He charges somewhere near $270 for the porting (includes solvent tanking, welding, bead blasting etc), the rest of the expenses depend on how much it costs to ship it to him and return shipping. I'd go this route if it were me. The Explorer intake will perform near the same as the other intakes after a Tmoss port and it looks way nicer than the aftermarket intakes IMO. The fitment and quality of China made intakes can be an issue.
 
Reactions: mikestang63 and a91what

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
May 25, 2017
#9
  • May 25, 2017
  • #9
JMGlasgow said:
How much does Tmoss charge to port lower Explorer intakes?
Click to expand...
About 300$ all said.

For the mild combo with an existing explorer intake...this is the best option. Most times it will flow around 275-290cfm..way more than the heads are capable of(without significant work) so you will have a combo that can grow with more mods and is cheaper than a new intake.
 
Reactions: mikestang63, a91what and FoxMustangLvr

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
May 25, 2017
#10
  • May 25, 2017
  • #10
FoxMustangLvr said:
He charges somewhere near $270 for the porting (includes solvent tanking, welding, bead blasting etc), the rest of the expenses depend on how much it costs to ship it to him and return shipping. I'd go this route if it were me. The Explorer intake will perform near the same as the other intakes after a Tmoss port and it looks way nicer than the aftermarket intakes IMO. The fitment and quality of China made intakes can be an issue.
Click to expand...
Where's he located?
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
May 25, 2017
#11
  • May 25, 2017
  • #11
billison said:
Where's he located?
Click to expand...
St Charles, MO 63303
 
Reactions: A5literMan

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
May 25, 2017
#12
  • May 25, 2017
  • #12
FYI, his son handles the porting these days. He did my lower and it was great work
 
Reactions: A5literMan

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
May 25, 2017
#13
  • May 25, 2017
  • #13
Mustang5L5 said:
FYI, his son handles the porting these days. He did my lower and it was great work
Click to expand...
Yes that's true. More and more people are figuring this out as most people use Tmoss's name on the boards still but it's Matt Moss that took over the porting. I'm sure the student is as good as the master.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
May 25, 2017
#14
  • May 25, 2017
  • #14
I had my victor lower ported by mr moss and had it back in about a week and a half. I'd look for a used edelbrock rpm intake over a pp china intake. Porting the lower is a cheap option as well. If it were me i'd do a holley intake and a more aggressive cam.
 

BKM48198

15 Year Member
Jun 7, 2008
377
27
49
Ypsilanti, Michigan
May 25, 2017
#15
  • May 25, 2017
  • #15
Thanks for all the info, this is a car that I use as a daily driver during good weather, and I am not really interested in racing it, just want it to keep looking good and run better than stock. It is a 90 GT and I bought it in 89. Most of the miles it gets is about 20 miles of freeway driving each way to work and a little around town, I just ordered new headliner, carpet, visors and already have a new set of seat covers ( OE style) that I plan on putting in over the 4th of July weekend. The seats are grey tweed but I went with Black for the other stuff. Which intake would be better for low end power, the ported Explorer or some other ? It does have an AOD trans with 3.73 gears and it seems to have lost some low end with the TFS heads and cam as compared to the stock cam and gt40 heads, but it has more high rpm power now, and the cam sounds better.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
May 25, 2017
#16
  • May 25, 2017
  • #16
so why change intakes?
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
May 26, 2017
#17
  • May 26, 2017
  • #17
I went from cobra intake to systemax II. I lost 4lbs tq and gained 10 hp. I didn't notice the loss of tq because it actually made a little more average tq and didn't really notice a gain in power. Biggest difference is that with the cobra intake it would fall on its face just around 5800, but keeps pulling with the systemax II. Porting your explorer lower will fix that for you.
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
May 26, 2017
#18
  • May 26, 2017
  • #18
Holly systemax2 would be what I go with. I have one now on my daily which is similar build ported tfs170, 1.6, 24lb, 70mm tb and it moves out real nice. Professional products intakes have been proven to be decent only problem is they tend to have allot of slag in the ports. Just clean them up and it'll be a decent intake for cheap.
 
Reactions: BKM48198

Saberstang

Active Member
May 2, 2017
130
24
28
Atlanta, GA
May 31, 2017
#19
  • May 31, 2017
  • #19
BKM48198 said:
it seems to have lost some low end with the TFS heads and cam as compared to the stock cam and gt40 heads.
Click to expand...
With the TFS heads and cam which is best matched with the TFS intake will suffer a little bit in the low range rpms but, mid or high range rpms will greatly improve in the powerband.
Grn92LX said:
I'd look for a used edelbrock rpm intake over a pp china intake.
Click to expand...
RangerJoe said:
The PP intake is no better than the explorer intake.
Click to expand...
FoxMustangLvr said:
The fitment and quality of China made intakes can be an issue.
Click to expand...
I seen dyno sheets that proved the PP intake didn't make any more rwhp or rwtq than the explorer intake what a waste of money. All intakes are designed to make power in different areas of the rpm powerband. That is why you choice cylinder heads and a camshaft that best match the intake manifold you choice.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
May 31, 2017
#20
  • May 31, 2017
  • #20
Saberstang said:
I seen dyno sheets that proved the PP intake didn't make any more rwhp or rwtq than the explorer intake what a waste of money. All intakes are designed to make power in different areas of the rpm powerband. That is why you choice cylinder heads and a camshaft that best match the intake manifold you choice.
Click to expand...

A lot of intakes are a waste of money for the average person with the average combo which is why the budget friendly tmoss ported explorer is the most recommended intake. It works, it looks better than most intakes, better quality, all for less money. As far as you talking about matching the cylinder heads, cam, and intake according to power band and use of the car I'll have to come back to the explorer again over TFS or others. For a street car you want good low to mid range power. Who cares if an intake makes power from 2500 to 6500. Whens the last time you took a Mustang to 6,500 rpms on the street? My car is a good street car and my occasional romping of the throttle ends near 5,000 rpms because I'm not a huge a-hole looking to cause a wreck.

Good luck with whatever you choose
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
335
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
Cooling Jacket Pitting Idea's?
  • BoostedRed89gt
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
358
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Mustang5L5
F
86 notch NEED HELP!!!!
  • foxbody86
  • Jul 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
165
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2026
Noobz347
K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?