LT for GT40P's????

[tbi92rs]

Does ANY company make Long Tube Headers for GT40P headers????? going in a Fox body 5.0/5 speed car.

 

[Tonys96Cobra]

BBK and MAC will work with 90 degree boots and a "custom spark plug wrench" ie one with a hole cut in the side..

 

[loud 95]

What he said. Mac does have GT40P specific headers, as well.

 

[DeVus1]

Mac is the only company I know of.

 

[tbi92rs]

and they are LONG TUBES...rght???

 

[Woodrow]

I would go with the bbk l/t's b/c mac's suck if you ever take them off. Or if you want to spend some $$$ I know kooks will make some for you.

 

[mob]

I bought a set of used hedman longtube headers from a guy who had them modified to fit gt40p heads, he said they fit before they were modified but he had them modified for extra clearance, ive test fitted them and their perfect, dont need any special socket or anything, dont go mac because of the individual flange, go BBK, they will fit, you may have to do the custom socket but its easy work.

 

[tbi92rs]

Well im looking for kinda CHEAP yet effective. These iwll be useless on my new motor Im building (408). So Im notl ooking for ceramic coated Hookers.

Thanks on all the words o wisdom. im checking into them all now!

 

[rigamaroles]

Im not sure if i understand right...but you're using them on a 408W, and you're looking for a cheap and somewhat effective header? If you went through all the $$ to build a stroked windsor, why wouldnt you get a good set of headers? And why would you be using GT40P's on it?

 

[Grits]

Im not sure if i understand right...but you're using them on a 408W, and you're looking for a cheap and somewhat effective header? If you went through all the $$ to build a stroked windsor, why wouldnt you get a good set of headers? And why would you be using GT40P's on it?

because he spent all his money on a bulletproof bottom end silly...