Mach 1 Long tube headers ?

harrisonfiveo said:

Ok guys i've searched thru the tech artcles with not so much luck. How much of a PITA is it to put some Long tubes on the 03/04 Machs? Coming from a 95GT that i put H/C/I and every other bolt on imaginable to these mod motors is a bit different. Just want to know what im getting into...and opinions on which manufacture is best for them. Appreciate any help

Click to expand...

not gonna lie, installing lt headers on our cars is a huge PITA...In most cases you have to lower the k member.....

harrisonfiveo said:

ugh....definitely something i dont want to tackle in my driveway on jackstands then

appreciate the advice deftsound

Im beginning to think everything about modding these cars is a PITA

But damn its fun to drive

Click to expand...

yea they can be, its definitely more expensive than your 5.0 but you can't beat the top end!

It isn't bad at all if you don't mind being on the ground for a while. None of it is hard, just time consuming. Just get the car HIGH off the ground like 1.5-2 feet and it is much better. I backed my car onto ramps in the backand then used a jack with wood blocks to get the front end way up there. Made it so nice. Being able to maneuver is what you wnat. Get a buddy and you are set. All you need the buddy for is lifting and lowering the k. It will take a while the first time, but you will feel like you could do it is 2 hours after that.

BTW the car in my sig and av are now sold. I got an 03 mach and did put the long tubes on. They make it very loud with and o/r x and magnapacks.