Mach 1 wheels on my car

Darkwriter77 · Apr 14, 2009

Me likey.

Shakerhood · Apr 15, 2009

JamesB88 said:
Thanks for the complements guys. I once I get settled into my new house, I'll start tearing the car down for body work. May wait till the end of summer though, would like to get a 10 sec slip out of it before I tear it all down for paint.

For the front Im putting 96 GT brakes on it, I picked up the spindles, calipers, rotors, lines with new pads for $150. I would of rather had 94/95 stuff but I got the 96 stuff dirt cheap. Right now the wheels have 245/45/17s on them, They seem to tall for the front since I have it really low on coil overs. I want to put 245/40/17s on the front then 275/40/17s on that back.

Unless you are planning on using an Aftermarket K Member I would avoid using the 96 Spindles as they will cause Bumpsteer Issues! I would also look at using some 99-04 Front Calipers as they are Dual Piston and Aluminum instead of Steel and Single Piston. 245/45/17s and 275/40/17s have the same diameter so they will height match front and back.

NIKwoaC · Apr 15, 2009

I think Mach wheels are badass on Foxes. I've got some 17x8s and 17x9s that will be going on my car with Cobra brakes as soon as I have some free time and talk myself into dropping the couple grand its going to be to finish the project...

ryan218 · Apr 15, 2009

NstyLx said:
The Mach's look good on the foxes. I was going to put a set on my 93 but never made it past the freebie New Edge GT wheels.........

As posted above, alot of the newer factory wheels look good on foxes!!

Hey! were like brotha's ya know. very rare to see someone else running them wheels! :grouphug:

hey your car has the same stance as mine too. what springs do you have?

i kinda regret getting rid of my sportlines

i like them on there man. ive been trying to find a set for sale for a while now local. i want to see what theyd look like on a vert. theres also a set of wheels i wanna try on there that are factory but i have only seen on 2 foxes to date so far. one in a mag, and the other in person.

MAC'n89Blckstng · Apr 15, 2009

fiveohwblow said:
Quick-That guy should be shot and in the future when you sell a car you have to prescreen with us here on SN That way we can stop another fox from being treated like that...

Yea that car was HIGHLY mistreated after Bill (quick91LX) owned it. There were some good things and some bad things done to that car after bill but the bads out did the goods. APC Racing seats - bad, He thought he was putting in a lightweight flywheel in it when he put in a 28oz flywheel. Weeellll lets just say the engine had a pretty bad engine vibration. It does have a centerforce clutch, and a 3550. The idiot like knawed a hole in the rear body panel for the battery cut off switch.

That car is now back to the guy who owned it before Bill. (Made that car look the way it did when bill had it.) Its got a new motor with Patriot 185's and all that fun stuff. I'm going to help him with painting it black again and were gonna convert the interior to all black and he want's to eventually get black FR500's for it.

JamesB88 · Apr 15, 2009

Shakerhood said:
Unless you are planning on using an Aftermarket K Member I would avoid using the 96 Spindles as they will cause Bumpsteer Issues! I would also look at using some 99-04 Front Calipers as they are Dual Piston and Aluminum instead of Steel and Single Piston. 245/45/17s and 275/40/17s have the same diameter so they will height match front and back.

I have looked into putting PBR calipers on it, probly something Ill do down the road. I have a Hook'en Chassis Tube K member and A-arms for the car. Also have a Flaming river rack with a UPR bump steer kit that I hope to solve the bumper street issues with. Might be picking up a set of MT ET street radials, for the rear from a buddy that is about to sell his car.

SVT32VDOHC · Apr 15, 2009

I used to not like the Mach 1 wheels on fox bodies at all. But....now I like them on GT's. Still don't care for them on LX's.

JamesB88 · Apr 17, 2009

After runing around for a week with mach 1 wheels on the back and Pony's on the front. I finished up the front 5 lug on my car wednesday. Still going to raise the front up just alittle probly another 1/2" just have to turn the coil overs up alittle..

foxmustangman · Apr 18, 2009

Sick man. Absolutely sick!

tom2001gt · Apr 18, 2009

Wheels look good

fastblacknotch · Jan 1, 2011

Here's my 88 notch. It's getting COBRA brakes all the way around. It has an sn95 rear and 94 spindles/ hubs.

JamesB88 · Jan 1, 2011

Pretty old post, I was still living at my apartment then.. my car still looks the same, its had 99 cobras, 04 bullits, 18" chrome bullitts and pro-stars on it since then, but has Mach 1 wheels back on it now. Couple newer pictures (about 6 months ago)

I have droped the rear about 1.5" and raise the front alittle since the pictures...

1991notchbackLX · Jan 1, 2011

I'm not sure there's any way to say this without sounding like an *******, but why haven't you put the money you spent on four different sets of wheels and tires into some paint and bodywork? Your car is nice and could be much nicer with some finishing touches. Not being a dick, just saying...

cenok is family · Jan 1, 2011

JamesB88 said:
Pretty old post, I was still living at my apartment then.. my car still looks the same, its had 99 cobras, 04 bullits, 18" chrome bullitts and pro-stars on it since then, but has Mach 1 wheels back on it now. Couple newer pictures (about 6 months ago)

I have droped the rear about 1.5" and raise the front alittle since the pictures...

so did you use the 96 spindles? any issues with bumpsteer?

ill advised · Jan 1, 2011

NstyLx said:
The Mach's look good on the foxes. I was going to put a set on my 93 but never made it past the freebie New Edge GT wheels.........

As posted above, alot of the newer factory wheels look good on foxes!!

Anytown, USA Cool pic, and a damn fine looking GT. Are the wheels machined? Polished? Very nice. They look like 35th Anniversary's without the dark inserts.

mustang863 · Jan 1, 2011

i had to add i been thro every wheel on a buget get even had 20s now i found the wheels i love and i have to say the cobra wheels make the sexy lol
im runing 225 45 17 on the front 245 40 17 on the back

Mustang5L5 · Jan 2, 2011

The cobra do look good . I have the chrome ones

JamesB88 · Jan 2, 2011

1991notchbackLX said:
I'm not sure there's any way to say this without sounding like an *******, but why haven't you put the money you spent on four different sets of wheels and tires into some paint and bodywork? Your car is nice and could be much nicer with some finishing touches. Not being a dick, just saying...

No offense taken. Plain and simple, its easyier to swap wheels then paint a daily driven Mustang. My plan was to start body work on it over this winter but the plant I'm working at is closing down (Folgers) so not going to jump into a big project. I bought the pro-stars since I run alot at the track and got a great deal on them (450 for full set with tires) I ended up selling them to another local guy, and he gave me the 18" bullitts that where on his car for making the prostars fit (pulled quads, adjust tail pipes, etc) I didnt like the looks of the 18s so I trade them for some 04 Bullitts, they looked good had good tires but had another freind that wanted them for his V6 so sold them, and now I'm back to Mach 1 wheels.. Sorry for the long story about the differnt wheels ive had.. lol

I do have a oem front bumper, 93 gt front fenders, 93 cobra front fender extensions, and a new hatch for it. Need to get a drivers door and some 1/4 patch panels.. kinda at the point where I might buy a roller and swap my stuff over..

I did use the 96 spindles, car has a D&D k-member with hooken chassis control arms. I have a UPR bump steer kit on it, flaming river manual rack. It has alittle bump steer when hitting big bumps but nothing to bad.

cenok is family · Jan 2, 2011

thanks for the info. reason i asked is i have a full 03 GT 5 lug/disc brake setup including the spindles which i believe are the same. everything i've read says they'll cause severe bumpsteer issues, but anytime i read about someone actually using them, they report no issues. i'm trying to decide if i want to use the spindles i have, or sell them and get 94/95 spindles.

Adams91LX · Jan 2, 2011

cenok is family said:
i'm trying to decide if i want to use the spindles i have, or sell them and get 94/95 spindles.

MM would advise the later.

"Doing so will significantly increase bumpsteer because...

* The steering arm on the 1996-04 spindle is about 1.02" (26mm) lower (relative to the rest of the spindle) than the steering arm of any 1979-95 spindle.
* The lower steering arm forces the outer tie-rod end to a lower position.
* That new position is far too low for the steering rack location of any 1979-95 Mustang, and radically changes the steering geometry.
* It is impossible to correct the geometry with a bumpsteer kit because the outer tie-rod end needs to be raised so much that it would have to occupy the same physical space as the steering arm."

Mach 1 wheels on my car

Darkwriter77

Resident Ranting Negative Nancy

Shakerhood

NIKwoaC

中國製造

ryan218

In just 10 years, I'll be old enough to drive!!!!

MAC'n89Blckstng

Active Member

JamesB88

Member

SVT32VDOHC

waiting for the next hack atta

JamesB88

Member

foxmustangman

Member

tom2001gt

fastblacknotch

New Member

JamesB88

Member

1991notchbackLX

Active Member

cenok is family

ill advised

Member

mustang863

Member

Mustang5L5

That is…until I whipped out my Bissell

JamesB88

Member

cenok is family

Adams91LX

Active Member

Similar threads

Mach 1 wheels on my car

Resident Ranting Negative Nancy

中國製造

In just 10 years, I'll be old enough to drive!!!!

Active Member

Member

waiting for the next hack atta

Member

Member

New Member

Member

Active Member

Member

Member

That is…until I whipped out my Bissell

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency