• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Max horse 4.6

  • Thread starter Thread starter Ftony
  • Start date Start date Jul 23, 2005
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 23, 2005
#1
  • Jul 23, 2005
  • #1
whats up guys ?i was hoping someone could comment on this question i have.i have a 2003 gt conv with a saleen charger kit using 40 lb injectors and (03 cobra pump) full length headers x pipe magna flow exaust,373.its set up to run 335 rwhp,380 or so at the crank dyno day was 95 degres that day but anyway,the dude who set the car up told me he can get it to make more power with a different tune.but im concerned with blowing the engine....it has 19000 miles on it,so i really dont want to nade it.whats the max safe horse the 4.6 block stock can handle???? and any idea what it might run in the 1/4 mile,assuming i can drive ,i have run the track many times with my old 70 formula 400 4spd twice a week.any help greatly appreciated
 

silentbullitt

New Member
Apr 17, 2005
63
0
0
san antonio
Jul 23, 2005
#2
  • Jul 23, 2005
  • #2
Motor should be able to handle at the max around 400 - 420 range. It should put you in the low 12's if you have a good susp. set up.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 23, 2005
#3
  • Jul 23, 2005
  • #3
got some room then

i was thinkn about 400 or so ..thank you what time was that estmiate with the new tune or the way it is????thanks bro
 

silentbullitt

New Member
Apr 17, 2005
63
0
0
san antonio
Jul 23, 2005
#4
  • Jul 23, 2005
  • #4
I really wouldn't push past 400 rwhp with a real good tune. I had a buddy that had a bullitt pushing close to 402 rwhp with a pretty mild tune and he would get low 12's. He tried going with a more dangerous tune and blew his motor on the dyno.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 23, 2005
#5
  • Jul 23, 2005
  • #5
SO WOULD YOU SAY 375 RWHP IS SAFE FOR THE STOCK BLOCK....I HAVE A NEW PULLY THAT WILL GIVE ME 11PSI OF BOOST NOT SURE IF I EVEN NEED IT. BUT DO WE REALLY NEED HALF THE s#IT WE BUY ,HEHE .THANK YOU FOR THE INFO
 

04gtdrop

New Member
Jun 10, 2005
532
0
0
Sac, CA
Jul 23, 2005
#6
  • Jul 23, 2005
  • #6
yeah i agree, i have heard that the internals on the GT's are weak and that they can not handle more than 400hp MAX. if your going to try to go beyond that, buy some forged internals. otherwise i would stay below the 400 mark.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 23, 2005
#7
  • Jul 23, 2005
  • #7
i guess 400 horse is not bad its already fast at 380 not sure if id notice much difference with 20 horses.....i really dont want to blow it up...well not just yet anyway.thanks guys
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 23, 2005
#8
  • Jul 23, 2005
  • #8
Ftony said:
i guess 400 horse is not bad its already fast at 380 not sure if id notice much difference with 20 horses.....i really dont want to blow it up...well not just yet anyway.thanks guys
Click to expand...


no its good to about 400RWHP, not crank. so you have about 60 or so HP left to play with. maybe a smaller pulley on the saleen blower and a retune will put you in the 375rwhp range. That will be enough until you get some forged internals.
 

blackink00

I missed a shift & stole Curt's money.
Mar 30, 2005
545
0
0
Tempe, AZ
Jul 23, 2005
#9
  • Jul 23, 2005
  • #9
335 rwhp out of a pi'ed 4.6. that sucks with a blower.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 23, 2005
#10
  • Jul 23, 2005
  • #10
blackink00 said:
335 rwhp out of a pi'ed 4.6. that sucks with a blower.
Click to expand...


thats about right, same as the guy who had the frpp blower(6lb) and pi and the other guy who has that big a$$ thread going...he has the KB(6lb) kit in the same area. all are around 335rwhp.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 23, 2005
#11
  • Jul 23, 2005
  • #11
335 rwhp is about 380 at the crank thats what the cars tuned for,not what it can ultimatly produce ,thats what im asking i can tune the car to make more power but it seems to me, and the replys im getting its dangerous as far as blowing the engine,pay attention will ya
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Jul 23, 2005
#12
  • Jul 23, 2005
  • #12
Watch the caps damn it.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 23, 2005
#13
  • Jul 23, 2005
  • #13
droptop ,thanks bro ,i actually have another pully....should be able to tune it up a bit with the pully i have .ill probly put it on anyway little concered bout blowing a head gasket though.
 

2000 blown conv

New Member
Apr 5, 2005
61
0
0
Ontario Canada
Jul 24, 2005
#14
  • Jul 24, 2005
  • #14
Ftony said:
SO WOULD YOU SAY 375 RWHP IS SAFE FOR THE STOCK BLOCK....I HAVE A NEW PULLY THAT WILL GIVE ME 11PSI OF BOOST NOT SURE IF I EVEN NEED IT. BUT DO WE REALLY NEED HALF THE s#IT WE BUY ,HEHE .THANK YOU FOR THE INFO
Click to expand...
#1 its not the block that's an issue. The block will handle over 500rwhp with no issue. Its the pistons and rods that are the issue. I have been running 455 rwhp on my stock shortblock for over a year with no issue. No detonation, 435 lb torque. Depends how good the tuner is...
 
J

jammer0808

New Member
Nov 10, 2004
12
0
0
Jul 24, 2005
#15
  • Jul 24, 2005
  • #15
As you can see from my numbers 400+RWHP is sustainable on stock motor, just have to treat it with respect. Don't thrash it everyday and it will last. The key is having a good dyno-tune that keeps your fuel/air ratio in check.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jul 24, 2005
#16
  • Jul 24, 2005
  • #16
Ftony said:
SO WOULD YOU SAY 375 RWHP IS SAFE FOR THE STOCK BLOCK....I HAVE A NEW PULLY THAT WILL GIVE ME 11PSI OF BOOST NOT SURE IF I EVEN NEED IT. BUT DO WE REALLY NEED HALF THE s#IT WE BUY ,HEHE .THANK YOU FOR THE INFO
Click to expand...


ok this needs too be cleared up... the BLOCK itself is pretty strong and will handle way over 600 HP.. some say even 1000.. it's the internals. pistons,rods,crank that need too be replaced.
 
F

Ftony

New Member
Jul 23, 2005
42
0
0
nj
Jul 24, 2005
#17
  • Jul 24, 2005
  • #17
block

svttech76 said:
ok this needs too be cleared up... the BLOCK itself is pretty strong and will handle way over 600 HP.. some say even 1000.. it's the internals. pistons,rods,crank that need too be replaced.
Click to expand...
first off i want to thank all the replys really appreciated.....what i meant by saying the stock block max horse i meant from a short block stand point crank rods pistons.sorry my bad ,the other thing is i pretty much drive the thing like its stolen...hehe weekend car that gets all my frustration from a stressfull week.so maybe a safer tune for me would be 375rwhp
 
You must log in or register to reply here.

Similar threads

C
98 gt fuel pressure issues
  • chasecollier1984
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
185
SN95 4.6L Mustang Tech Jun 2, 2026
chasecollier1984
C
D
How to test for a bad coil pack - 4.6 liter motor
  • DesertStang
  • Oct 7, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Jan 14, 2026
DesertStang
D
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
For Sale 99-04 GT 4.6 CONV COUPE COBRA SET OF 4 FRONT/REAR SPRINGS. TODS HOT RODS MOORPARK CA 93021 $225
  • Tods Hot Rods
  • Nov 20, 2024
  • Suspension Parts
Replies
1
Views
528
Suspension Parts Dec 12, 2024
caliber92
Engine No start issue AGAIN!
  • ucnhtmenow1
  • Sep 1, 2024
  • SN95 4.6L Mustang Tech
Replies
5
Views
1K
SN95 4.6L Mustang Tech Sep 11, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?