Maybe Changing Mod List - FRPP Blower, PI Cams, Nitrous?

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Mar 22, 2006

#1

• Mar 22, 2006

• #1

How much power think i could get if i run FRPP Blower, PI Cams, NPI Heads (I Know I have P&P PI's Sitting here), and my NX Wet Kit w/100 shot (Only when Needed), with 36lb injectors? I am looking for about 400hp on the blower with a 9lb pulley, and with the 100shot about 70hp. What do you think?


Any Help will be nice thanx

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Mar 23, 2006

#2

• Mar 23, 2006

• #2

anyone???????????

 

QU!CK

New Member

Apr 27, 2004

146

0

0

Charlotte, NC

Mar 23, 2006

#3

• Mar 23, 2006

• #3

FRPP blower isn't worth the $$$. A member here posted his dyno results and they weren't bad but they weren't impressive either....on top of that, the blower started LOSING power after (IIRC) 3 pulls on the dyno

Look back a few pages or do a search for FRPP blower....you'll see the thread.

BTW, hurry up and get those PI heads installed so we can race again


-J

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Mar 23, 2006

#4

• Mar 23, 2006

• #4

LOL, yeh i guess you are right I am better off the first way i planned. But that was only with a 5lb pulley. If a 9lb was added then the results would be better. The dyno showed 304hp with a almost stock NPI motor and that really impressive with a 5lb pulley.

 

DropTopPony

Noob Slayer

Founding Member

Aug 13, 2002

2,570

3

48

south jersey

Mar 23, 2006

#5

• Mar 23, 2006

• #5

mustangman9812 said:

LOL, yeh i guess you are right I am better off the first way i planned. But that was only with a 5lb pulley. If a 9lb was added then the results would be better. The dyno showed 304hp with a almost stock NPI motor and that really impressive with a 5lb pulley.

Click to expand...

plus it was a funky outdoor mobile dyno in the heat!
Why not get the kit like mine for PI heads? I have PI heads P&P'd by VT Engines. I'm expecting in the area of 350-360rwhp through my auto...I know a few guys who were putting down 375rwhp area a few years ago with stock cams/stock pi heads and 9lb pulley. I'll also be doing nitrous but only about a 50 shot just to cool the intake temperatures at the track and give it a slight boost.

 

hognutz

New Member

Nov 12, 2002

1,940

0

0

albany, oregon

Mar 23, 2006

#6

• Mar 23, 2006

• #6

I would just buy a nice supercharger kit. and swap the pi heads and cams on.

then sell the wet kit. the FRPP supercharger is not a cheap as you think after it is all said and done.

it would not bother with NOS and a supercharger because you can alway just up the octane and pulley at the track and have an extra tune.

I would go one way or the the other. run the spray or run the boost.

it is just more cost effective since you motor will only handle so much on the stock bottom end.

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Mar 23, 2006

#7

• Mar 23, 2006

• #7

well i dont wanta do the heads because of the compression ratio after putting them on

 

DropTopPony

Noob Slayer

Founding Member

Aug 13, 2002

2,570

3

48

south jersey

Mar 23, 2006

#8

• Mar 23, 2006

• #8

mustangman9812 said:

well i dont wanta do the heads because of the compression ratio after putting them on

Click to expand...

Your gonna need a built shortblock to run a blower & nitrous regardless of what heads you use so you might as well use the PI ported and get a larger dish piston to offset the boost.

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Mar 23, 2006

#9

• Mar 23, 2006

• #9

yeh true. Well nm i have forgot the whole thing. I am going to do my list i have now and if motor goes i will worry about it them. I guess the mod but wanted me to spend a little more, but to fast lol