Missing Washer Resivior

billison

I like tinted tail

15 Year Member

Feb 27, 2006

2,607

1,094

184

stl

Jun 25, 2013

#1

• Jun 25, 2013

• #1

Ok, so my 92 didn't have a washer resivior when I got it.

I'm picking up one Friday.

I've looked into the fender and see a hose. What else do I need to locate? Any special clips or bolts? Where is the actual pump? I've never messed With the stuff under the fender.

 

MikeH686

Mine is only two inches though.

10 Year Member

Oct 11, 2011

2,843

1,753

184

Waldorf, MD

Jun 26, 2013

#2

• Jun 26, 2013

• #2

Theres a pump with the reservoir look in the fender area for a two prong plug shaped like a trapezoid i think the wires are two black wires

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,170

17,870

224

Massachusetts

Jun 26, 2013

#3

• Jun 26, 2013

• #3

You'll have to pull the wheel and fender liner to install it...assumed oyu knew that

 

billison

I like tinted tail

15 Year Member

Feb 27, 2006

2,607

1,094

184

stl

Jun 26, 2013

#4

• Jun 26, 2013

• #4

Yup. Splash shield will get removed. The pump is located in the resivior?

 

MikeH686

Mine is only two inches though.

10 Year Member

Oct 11, 2011

2,843

1,753

184

Waldorf, MD

Jun 26, 2013

#5

• Jun 26, 2013

• #5

Yes but you can get them i have an entire assembly if you want me to sjip it to you

 

MikeH686

Mine is only two inches though.

10 Year Member

Oct 11, 2011

2,843

1,753

184

Waldorf, MD

Jun 26, 2013

#6

• Jun 26, 2013

• #6

At least i think i do

 

billison

I like tinted tail

15 Year Member

Feb 27, 2006

2,607

1,094

184

stl

Jun 26, 2013

#7

• Jun 26, 2013

• #7

Check on that if you can.

 

MikeH686

Mine is only two inches though.

10 Year Member

Oct 11, 2011

2,843

1,753

184

Waldorf, MD

Jun 26, 2013

#8

• Jun 26, 2013

• #8

Yeah will do

 

billison

I like tinted tail

15 Year Member

Feb 27, 2006

2,607

1,094

184

stl

Jun 27, 2013

#9

• Jun 27, 2013

• #9

Okay, just picked up my reservoir. It came with the pump. So as long as my Plug is intact, I should be good to go.

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

Jun 27, 2013

#10

• Jun 27, 2013

• #10

Heard a story one time where a guy use that pump system to pump a drink mix into the cabin

 

MikeH686

Mine is only two inches though.

10 Year Member

Oct 11, 2011

2,843

1,753

184

Waldorf, MD

Jun 28, 2013

#11

• Jun 28, 2013

• #11

Yeah its a black two pronged plug

 

billison

I like tinted tail

15 Year Member

Feb 27, 2006

2,607

1,094

184

stl

Jul 7, 2013

#12

• Jul 7, 2013

• #12

Got it installed yesterday. Plug was intact, it had been pulled into the engine bay via the hole that the resivior goes through. All it took was one bolt from my parts pile. Very easy with no issues to install.

I took my time and cleaned just about everything in the wheel well and painted the caliper while I was at it.


Thanks for the help guys.