mk8 swap no power to coils

[1stanger1]

ok i am trying to finish up with my swap and i dont have any power to my colis either one of them
is there anyway to hook them up to a switch ? and if there is which wire should i use to hook where

as your standing in front of the car the coil on the left has a tan/wht red/grn and tan/orange

the one on the right has a tan/grn red/grn and a tan/blu

any help here would be appreciated

thanks
alan kendall

 

[blubullett]

I read somewhere that there are a couple wires that you need to swap in the main wiring harness connector at the firewall that are for the coils. They had to do it in one of the magizines in the last couple months when they swapped a 4v into a bullitt. Either 5.0 or MM&FF.