Progress Thread Monkeybutt2000's 89 vert build thread- 408w build in progress

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Feb 3, 2023

#301

• Feb 3, 2023

• #301

a91what said:

Man you really know how to up the anxiety level... now I have to go check mine

Click to expand...

Nah Steve,I'm past the half century mark. My brain just don't work like it should. That's my excuse anyway

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,733

6,716

214

Hillsborough county

Feb 3, 2023

#302

• Feb 3, 2023

• #302

Then I have no excuse

 

Reactions: Monkeybutt2000

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Feb 3, 2023

#303

• Feb 3, 2023

• #303

Update: pulled all rockers,and I'm just gonna guess that once I set the guideplates and tightened them down I never torqued them. They weren't "loose" but they were NOT 55# torque either. Gonna do another pushrod length check cuz I'm not convinced they're the right length.

 

Reactions: Cheapskate207, 2Blue2, a91what and 2 others

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Feb 10, 2023

#304

• Feb 10, 2023

• #304

Alright,received my valve spring compressor and low tension springs. Let's get this pushrod length narrowed down.

 

Reactions: Potomus Pete, 2Blue2 and General karthief

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Feb 11, 2023

#305

• Feb 11, 2023

• #305

Going with a 6.350 pushrod,gave me the best pattern. Hopefully someone has them in stock.

 

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Mar 3, 2023

#306

• Mar 3, 2023

• #306

Got her all buttoned up,went to put the belt on and had a moment. Now, I worked a 10hr shift and may have had a few beers. This took me a few minutes to figure out,LOL

 

Reactions: 85GTStangGuy

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

28,013

10,637

213

polk county florida

Mar 3, 2023

#307

• Mar 3, 2023

• #307

Ahhhhhh, kinda forgot something eh?

 

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Apr 8, 2023

#308

• Apr 8, 2023

• #308

Alright,car is running pretty good thanks to @a91what . I have an oil leak issue and appears to be the valve cover. I believe these are the lmr rubber/steel version. Never had an issue before but its bad enough to make a spot on the floor. Two questions: has anyone ran a thin coat of rtv on this type of gasket? Also,its kinda hard to see but in the second pic there is a threaded hole on the side of the block. What is that for? Still has engine paint on the threads so looks unused,but definitely had oil there.

 

Reactions: Potomus Pete

90sickfox

Wasn't a pretty sight...and I've got big hands

SN Certified Technician

Mar 2, 2015

6,946

5,818

213

Apr 9, 2023

#309

• Apr 9, 2023

• #309

That threaded hole is unused.

 

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Apr 11, 2023

#310

• Apr 11, 2023

• #310

90sickfox said:

That threaded hole is unused.

Click to expand...

Yeah,figured that out. Apparently on some aftermarket blocks it's an oil sending hole. Got some UV dye last night so that'll tell me what's up.

 

Reactions: 2Blue2 and a91what

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Apr 23, 2023

#311

• Apr 23, 2023

• #311

Got this hood installed today,it's ok. Will eventually put the stock hood with the 84 GT scoop back on. I've been organizing a benefit car show for a work buddy who has stage 4 bone cancer. The first thing he asked me is if the Fox was gonna be there. So been burning the midnight oil to get it ready.

 

Reactions: 90sickfox, 2Blue2, bird_dog0347 and 2 others

Cheapskate207

The left one hangs a little lower

5 Year Member

Jan 12, 2020

761

541

113

Maine

Apr 23, 2023

#312

• Apr 23, 2023

• #312

Good on you for organizing the fundraiser. Car looks great!

 

Reactions: Monkeybutt2000, 2Blue2 and limp

2Blue2

will be trying this sex one when I can find it

Mod Dude

Mar 5, 2019

4,436

2,903

163

Oahu

Apr 27, 2023

#313

• Apr 27, 2023

• #313

Looking sweet for the show!
Heck yeah!
Carry ON!

 

Reactions: Monkeybutt2000

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Apr 30, 2023

#314

• Apr 30, 2023

• #314

Well folks,had to cancel the show due to weather. No worries had a rain date and will be early summer weather. So,last time I drove the Fox,I heard rubbing and it smelled like burnt rubber. Appears my Team Z springs settled,and are letting the 275s rub on the 1/4s. Fortunately I have a fender roller on hand. Not gonna get to it today,but should alleviate any issues.

 

Reactions: 2Blue2, General karthief and AeroCoupe

2000xp8

SN Certified Technician

Aug 8, 2003

8,054

1,639

194

NJ

Apr 30, 2023

#315

• Apr 30, 2023

• #315

If your paint is good be careful with that fender roller. Take precautions not to crack the paint.
Something I learned the hard way.

 

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

Apr 30, 2023

#316

• Apr 30, 2023

• #316

2000xp8 said:

If your paint is good be careful with that fender roller. Take precautions not to crack the paint.
Something I learned the hard way.

Click to expand...

Heat gun is ready. I did this years ago with the baseball bat method,worked pretty well.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,298

18,003

224

Massachusetts

Apr 30, 2023

#317

• Apr 30, 2023

• #317

2000xp8 said:

If your paint is good be careful with that fender roller. Take precautions not to crack the paint.
Something I learned the hard way.

Click to expand...

Same here. Even used the heat gun but cracked some paint.

One day I’ll try to touch it up. Certainly not worth a repaint but it bugs me

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,054

1,639

194

NJ

May 1, 2023

#318

• May 1, 2023

• #318

If i had to do it again, i think i would slot the lip.
It gets pulled in two different directions at once.

 

2Blue2

will be trying this sex one when I can find it

Mod Dude

Mar 5, 2019

4,436

2,903

163

Oahu

May 1, 2023

#319

• May 1, 2023

• #319

Monkeybutt2000 said:

I have a fender roller on hand

Click to expand...

Need some more in progress pic of this

 

Reactions: Monkeybutt2000

M

Monkeybutt2000

Mustang Master

Aug 11, 2019

1,387

851

133

Lafayette,IN

May 2, 2023

#320

• May 2, 2023

• #320

Kind've hard to photograph,but you can definitely see the difference from where the side molding is compared to top of wheel arch.

 

Reactions: 90sickfox and General karthief