more new parts came in

BennyBlown2v · Dec 11, 2007

Waaaat you gonna spray naaawwwz on that thing SHOOT!

hotmustang331 · Dec 11, 2007

N20 as well! Man your not holding back are you .

P-51 looks sick as well . But they are a bit too big for my tastes.

Have you weighed it yet? Im curious how heavy they are.

SaleenGT2001 · Dec 11, 2007

hotmustang331 said:
N20 as well! Man your not holding back are you .

P-51 looks sick as well . But they are a bit too big for my tastes.

Have you weighed it yet? Im curious how heavy they are.

i'm still debating on what the nitrous will be doing. i have an intercooler spray bar but i'm currently thinking about trying to hide a nozzle somewhere in the piping and doing a 100 wet shot as an alternative. it all really depends on how far the fuel system will hold out. i'm still trying to figure out how i can switch between the intercooler sprayer and a wet shot. i know i will have to get some type of y splitter and somehow block off one side so the nozzle and intercooler arent sprayed at the same time

the intake weighs in at 42lbs

CobraRed_96_GT · Dec 11, 2007

42lbs? are you serious? that weighs more than one of my cylinder heads

SilverBullet00 · Dec 11, 2007

I love the p51. Are you going to post build pics????

d98gt · Dec 11, 2007

How much did you pay for each?

02LaserRed2V · Dec 11, 2007

42lbs? PSSSSSH!!! My KB probably weighs 80-100lbs.

hotmustang331 · Dec 11, 2007

SaleenGT2001 said:
i'm still debating on what the nitrous will be doing. i have an intercooler spray bar but i'm currently thinking about trying to hide a nozzle somewhere in the piping and doing a 100 wet shot as an alternative. it all really depends on how far the fuel system will hold out. i'm still trying to figure out how i can switch between the intercooler sprayer and a wet shot. i know i will have to get some type of y splitter and somehow block off one side so the nozzle and intercooler arent sprayed at the same time

the intake weighs in at 42lbs

Man holy smokes! That bad boy is heavy....but its about the only intake that actually does anything, so I guess there has to be a trade off somewhere.

Switching between IC sprayer and 100 shot will be tricky. You will need to be able to disarm the N20 100 shot switch so it doesnt spray in fuel. The easiest thing to do is buy another bottle and run 2 seperate lines with 2 seperate arming switches. the IC spray should be based off of boost pressure when the system is armed and the 100 shot should be WOT based when armed.
Unless you can rig up a Y valve with 2 N20 remote bottle openers (more expencive than another bottle) I dont see it being made into an easy to use system.

Good luck and keep us updated! I like seeing new parts....even if they arent mine

SaleenGT2001 · Dec 11, 2007

the 100 shot is just an idea right now. the car will most likely make more power than what i can use anyways.
i just want to make sure i break 600rwhp!!!! i really dont think it will be an issue with everything that is going into the new engine. i know i REALLY miss driving my car. i have only driven it twice since July!

the build progress can be seen here
http://horsepowerjunkies.com/forums/showthread.php?t=57708

it will be a few more weeks since the heads are being ported by hand and there is a wait on having them done.

guitarpnk99 · Dec 11, 2007

You actually gonna hit it?

SaleenGT2001 · Jan 8, 2008

UPDATE:

CPR fuel rails
SCT3000 MAF
PPRV delete
Fuel pump wiring upgrade

all were delivered today

02LaserRed2V · Jan 8, 2008

Who said Christmas was over?

fobra559 · Jan 8, 2008

Nice man, that p-51 looks sick and of course the nos too. Lucky

ADRENLN · Jan 9, 2008

awsome new parts man!!!! i want the p51 for my set up as well.....but i always think it weighs a bit too much. i figure if we can lose weight somewhere else then it will be ok. awsome though that you build is on its way. i hope to get mine going in the spring.....have to financially recover. good luck man, keep us updated.

SaleenGT2001 · Jan 13, 2008

95302gt · Jan 13, 2008

is an aluminum drive shaft worth buying

LaserSVT · Jan 13, 2008

95302gt said:
is an aluminum drive shaft worth buying

Na, why spend money on something thats gonna make the car better

SaleenGT2001 · Jan 13, 2008

95302gt said:
is an aluminum drive shaft worth buying

WTF???
View attachment 337230

way to hijack a thread with a question that has ABSOLUTELY NOTHING to do with what we are talking about!!

now go use the search feature and answer your question. you may want to look into electric superchargers while you're at it, sounds like it should be right up your alley

SilverBullet00 · Jan 13, 2008

That bottle looks so sexy! I want one

more new parts came in

Well-Known Member

Attachments

New Member

Active Member

Well-Known Member

Active Member

New Member

New Member

Active Member

Well-Known Member

New Member

Well-Known Member

New Member

At least it's more erect and not floppy anymore.

Active Member

Well-Known Member

Attachments

New Member

Got FB banned again for saying nards

Well-Known Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency