most hp setup?

[Mr. Rustypwnz]

ok so my next round of mods on the 98 will either be:

pi cams/pullies or

pullies and headers or

pullies and a electric water pump..

car already has a bassani header back, 4.10's pi intake, a cai and a custom sct tune..

which is the best money per hp for these 4.6's?

 

[BlownStangGT]

How about none of the above

-PI Heads/Cams

 

[superstang46]

Had a 96 w/o PI and now a 04 w/ PI and for the cash it is the best investment, do the swap.

 

[Mr. Rustypwnz]

ite I wish i had the time to do the swap, right now im just limited to lameass boltons, I am fully aware of what a full pi swap is capable of, and a few ls1's were pleasently surprised when it rolled past em, but Im just looking for the best bang for buck at the moment..

 

[BlownStangGT]

You had mentioned about putting PI cams in the one, so I fig. if you are doing the hassle of them, do the heads haha

I say best bang for the buck, put in long tubes and a set of pullies and a new tune

 

[LI98GTStang]

Choice #1 is your best bet. PI cams and Pulleys will net you ~15-20 rwhp along with some tq increases.

 

[ADRENLN]

if doing cams you should go straight for aftermarket and skip the pi's. a set of cams like mine would be perfect for you. they are very miled. as a matter of fact, at the time i told them to make me a custom set that would be good with emissiions and still give a good power bump in the natural pi gt power band.

i was very happy with the cams i got. i never tried to pass inspection with them but they were very quiet and made what i feel is great power. they gained hp and tq all throught the rpm compaired to the stock pi's.

anyway, now that im blown i looking for a different caam to upgrade to but the ones i have now served the na version of my car great. i had ported heads and l/t with them and made 290rwhp.

you should look for something like that if emissions are not an issue. i have a feeling that they would pass anyway.

 

[Mr. Rustypwnz]

yeah im all over the pullies, btw: upr has a special going on right now for all that are interested, but pullies and a cai all for $169.99 thats not bad at all to me, but I work at steeda so I might get it cheaper than that.

So I guess ill go with pi cams and pullies and I think while im at it ill flash the tune..