MattZ281LE Founding Member Feb 6, 2000 345 1 19 Purcellville, Va Jul 31, 2007 #1 Jul 31, 2007 #1 Almost done. I have to finish fabricating the bypass valve piping and the engine vent system. I am ditching the factory coolant recovery tank and relocating the power train control module. In the near future the battery is going to the trunk also. Hopefully fire it this weekend. Attachments DSC02397.webp 82.7 KB · Views: 94 DSC02398.webp 76.6 KB · Views: 85 DSC02400.webp 91.4 KB · Views: 98 DSC02403.webp 73.7 KB · Views: 91
Almost done. I have to finish fabricating the bypass valve piping and the engine vent system. I am ditching the factory coolant recovery tank and relocating the power train control module. In the near future the battery is going to the trunk also. Hopefully fire it this weekend.
Wi Stang Member Jun 27, 2004 248 0 16 Fountain City, WI Jul 31, 2007 #2 Jul 31, 2007 #2 Wow, that is looking awesome. What are you planning on using to tune that beast?
BlackVert 15 Year Member Oct 3, 2003 5,589 9 98 Bethesda, MD Jul 31, 2007 #3 Jul 31, 2007 #3 wow that is going to be a hell of a lot of fun. i can say torque. i can also say break the tires loose at any rpm. but you have to do something about that ugly power steering pump is this a street car? but why move the computer? or do you mean the ccrm?
wow that is going to be a hell of a lot of fun. i can say torque. i can also say break the tires loose at any rpm. but you have to do something about that ugly power steering pump is this a street car? but why move the computer? or do you mean the ccrm?
Stanger007 Founding Member Sep 26, 2001 2,015 2 46 Baton Rouge, LA Jul 31, 2007 #4 Jul 31, 2007 #4 Looking goood! Do you have a hold down for the small coolant hose to keep it outta the serpentine belt? What did you paint your P/S bracket with? Looks great. What did you do for the oil sending unit side of things? I used a couple threads worth of high temp teflon paste - no leaks yet (knock on wood). Wes
Looking goood! Do you have a hold down for the small coolant hose to keep it outta the serpentine belt? What did you paint your P/S bracket with? Looks great. What did you do for the oil sending unit side of things? I used a couple threads worth of high temp teflon paste - no leaks yet (knock on wood). Wes
MattZ281LE Founding Member Feb 6, 2000 345 1 19 Purcellville, Va Jul 31, 2007 #5 Jul 31, 2007 #5 Wi Stang said: Wow, that is looking awesome. What are you planning on using to tune that beast? Click to expand... I have an SCT chip and will have it retuned again.
Wi Stang said: Wow, that is looking awesome. What are you planning on using to tune that beast? Click to expand... I have an SCT chip and will have it retuned again.
MattZ281LE Founding Member Feb 6, 2000 345 1 19 Purcellville, Va Jul 31, 2007 #6 Jul 31, 2007 #6 BlackVert said: wow that is going to be a hell of a lot of fun. i can say torque. i can also say break the tires loose at any rpm. but you have to do something about that ugly power steering pump is this a street car? but why move the computer? or do you mean the ccrm? Click to expand... Awe You dont like my PS Pump. Street car. Yes the CCRM not the ECU. I hate it sticking out. I have no A/C so I am moving the catch can and myoil seperator to the front bumper support behind the nose. Then the CCRM to a plate I am making where the original air filter was.
BlackVert said: wow that is going to be a hell of a lot of fun. i can say torque. i can also say break the tires loose at any rpm. but you have to do something about that ugly power steering pump is this a street car? but why move the computer? or do you mean the ccrm? Click to expand... Awe You dont like my PS Pump. Street car. Yes the CCRM not the ECU. I hate it sticking out. I have no A/C so I am moving the catch can and myoil seperator to the front bumper support behind the nose. Then the CCRM to a plate I am making where the original air filter was.
MattZ281LE Founding Member Feb 6, 2000 345 1 19 Purcellville, Va Jul 31, 2007 #7 Jul 31, 2007 #7 Stanger007 said: Looking goood! Do you have a hold down for the small coolant hose to keep it outta the serpentine belt? What did you paint your P/S bracket with? Looks great. What did you do for the oil sending unit side of things? I used a couple threads worth of high temp teflon paste - no leaks yet (knock on wood). Wes Click to expand... I actually have the collant hose mounted along the intake it wont move. I use Krylon Aluminum finish paint then cleared coated it. I used paste also, I dont like tape. A few things I did: I assembled the entire motor on the stang minus headers. and dropped it in. EASY. I had to modify the fox throttle bracket to clear the valve covers, even with a spacer.
Stanger007 said: Looking goood! Do you have a hold down for the small coolant hose to keep it outta the serpentine belt? What did you paint your P/S bracket with? Looks great. What did you do for the oil sending unit side of things? I used a couple threads worth of high temp teflon paste - no leaks yet (knock on wood). Wes Click to expand... I actually have the collant hose mounted along the intake it wont move. I use Krylon Aluminum finish paint then cleared coated it. I used paste also, I dont like tape. A few things I did: I assembled the entire motor on the stang minus headers. and dropped it in. EASY. I had to modify the fox throttle bracket to clear the valve covers, even with a spacer.
BlackVert 15 Year Member Oct 3, 2003 5,589 9 98 Bethesda, MD Jul 31, 2007 #8 Jul 31, 2007 #8 MattZ281LE said: Awe You dont like my PS Pump. Click to expand... the thing is that it is the first thing that attracts the eye because it is so different from the rest of the motor. i got a black one, and it doesn't stick out nearly as much: Attachments longb-002.webp 138.5 KB · Views: 114
MattZ281LE said: Awe You dont like my PS Pump. Click to expand... the thing is that it is the first thing that attracts the eye because it is so different from the rest of the motor. i got a black one, and it doesn't stick out nearly as much:
Stanger007 Founding Member Sep 26, 2001 2,015 2 46 Baton Rouge, LA Jul 31, 2007 #9 Jul 31, 2007 #9 MattZ281LE said: I use Krylon Aluminum finish paint then cleared coated it. Click to expand... Did you use clear from a rattle can or HVLP. What brand/mix? I want my brackets to look that sexy. Wes
MattZ281LE said: I use Krylon Aluminum finish paint then cleared coated it. Click to expand... Did you use clear from a rattle can or HVLP. What brand/mix? I want my brackets to look that sexy. Wes