• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Motorcycle Question

  • Thread starter Thread starter Shiroelex
  • Start date Start date Aug 9, 2006

Shiroelex

There's nothing worse than aut
Founding Member
Aug 23, 2001
728
1
27
Westland, MI
Aug 9, 2006
#1
  • Aug 9, 2006
  • #1
A guy I work with just bought his first sportbike; a 1990 Kawasaki Ex500 Ninja. Last night, some ass cut across the parking lot after work, and almost t-boned my buddy on his bike. My friend was about to take off, and had started rolling forward, as the car knicks his exhaust, knocking him over. The car took off, and my buddy was left there with his chain hanging off. I took a look at it today, and had to untangle the chain out of the trans part. Once I got the chain all straight and back on the wheel, the chain would get real tight every other revolution, and the chain would pop up on the rear gear. My assumption is that the chain got stretched out a little, and isn't meshing in the gear right anymore. He's going to be picking up a new chain tomorrow, so my question is this, for anyone who might know.

How do I get the old chain off? I don't see one of those removable links on the chain that's on, and I don't know if the new chain will come with that link either. Am I going to have to take half of this bike apart to get this chain off, or is there something simple? Also, if anyone knows of any helpful websites or forums, that would be greatly appreciated. Sorry about the little novel.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Aug 9, 2006
#2
  • Aug 9, 2006
  • #2
Yipes!! That sucks!! It sounds like the chain was twisted, binding a link or two so make sure the rear sprocket wasn't damaged as well. It's often recommended to change the sprockets anyway when you put on a new chain b/c if they are worn they will quickly wear out the new chain aswell. Sportbikes use a continuous chain with no masterlink, the reason behind this is to insure that there is no chance the clip on the master link can come off. Unless you have a chain breaker, you will need to remove the back wheel and the side engine cover to remove the chain. You could grind off the rivets and then rivet the new chain back on but I really wouldn't recommend it.
 
You must log in or register to reply here.

Similar threads

S
Timing chain, guides and tensioner installation (Possible orientation in Intake Stroke)
  • StallionMax
  • Sep 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
352
SN95 4.6L Mustang Tech Sep 24, 2025
StallionMax
S
R
PCM problem
  • Rjchild9
  • Sep 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
159
1996 - 2004 SN95 Mustang -General/Talk- Sep 24, 2025
Rjchild9
R
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
436
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
R
1994 GT 5.0L crank no start
  • Red1994MustangGT
  • Apr 15, 2025
  • 1994 - 1995 Specific Tech
  • 2
Replies
23
Views
1K
1994 - 1995 Specific Tech Aug 19, 2025
Kurt_MO
K
P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
825
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?