My 351 build with pics

MikeROD16 · May 27, 2008

trust me i didnt have a gasket leak, i had ALOT of silicone on the gasket to reassure any leaks. but w/e they have that there for a reason. they wouldnt put it if it didnt have a purpose.

795.0pacecar · May 27, 2008

Yes, its purpose is to make the mechanical fuel pump work on carbed cars. I have never seen a EFI 5.0 or 5.8 with one.

bentley429 · May 27, 2008

They don't all come with your sweet cam balancer, that was NOT the cause of your problem it something else. Oh ya by the way, nice 351 build looks like its going to be fun.

blackened88lx · May 27, 2008

This thread is awesome. Almost like the old days on SN. Cam Balancer That's friggin great. Are you sure you didn't replace your muffler bearings while you were putting your cam balancer back on? They can rob power too.

stykthyn · May 27, 2008

Mike is starting to remind me a lot of Ryan

5.0Torx · May 27, 2008

Those who say, dont know. Those who know, dont say...

to the OP: nice 351!

SMOKEDYA · May 27, 2008

well thanks to those for the complements on my build. 25thmustang what do you guy's run or what power do you lay down? I'm sticking with all of you on the mechanical fuel pump hoodiki! It was a 74 carbed van motor now it will be EEEEEEEFFFFFIIII i thought the fuel pump hoodiki ran off the cam itself tho? No worries made mysel my own fuel pump block off as well as all the brackets for the accsories! peace

john

stykthyn · May 27, 2008

what car is the engine going into?

MikeROD16 · May 27, 2008

w/e, and 795.0pacecar, you might have not seen it but i have, and i just posted a link to a 5.0 EFI with it.

795.0pacecar · May 27, 2008

MikeROD16 said:
w/e, and 795.0pacecar, you might have not seen it but i have, and i just posted a link to a 5.0 EFI with it.

I never said EFI 5.0s never came with them, I just said I haven't seen one that did. It still doesn't excuse the fact that you have no idea what in the hell you're blathering about.

To the O.P. sorry for derailing your thread. It looks like you're on the right track with that new motor.

SMOKEDYA · May 27, 2008

795.0pacecar said:
I never said EFI 5.0s never came with them, I just said I haven't seen one that did. It still doesn't excuse the fact that you have no idea what in the hell you're blathering about.

To the O.P. sorry for derailing your thread. It looks like you're on the right track with that new motor.

no pun here dog! i asked a question and i'm getting some answers! thanks for the compliment... to bad it will be a long project but hopefully this year! and trust me i'll keep progress pics as i go. things will be slow for a month as for i'm going back to ohio for a few weeks. peace

john

SMOKEDYA · May 27, 2008

stykthyn said:
what car is the engine going into?

this is going in my 93ssp coupe peace

john

Mr. Rustypwnz · May 27, 2008

ive personally seen about 5 of them on efi 5.0's on a couple of my own as well. they do nothing, its like all the holes in the engine bay, they do nothing, but in later cars they were used for various things to hold **** down, and by the time the 87-93 cars came there were holes everywhere in the sheet metal, because ford is stupid and didnt re-engineer anything, so thats why everyone of these cars are interchangeable, like the stupid bottom seat studs in a coupe or vert, and we should all know that the lower seat dosent even bolt in in those models... I guess ford had about 5 million of those things left over from the 85 cars (last to have a mechanical pump) and just put em on our cars to make us wonder lol

MikeROD16 · May 27, 2008

guess so lol. but then i wonder to myself....why did my car act stupid?? i guess thats a question that might never be solved.

MikeROD16 · May 27, 2008

and 795.0pacecar, dont take it personal. lol. i just ant stand when someone goes off on me and bashes on me because they say so with no rational explanation. and when that happens, i kinda get closed off and ****** back.

25thmustang · May 28, 2008

It sounds like 79pacecar is like you, only he can't stand when bad misinformation is given on the internet...

MikeROD16 · May 28, 2008

yep lol. well, we all learn from our mistakes. and as for the OP, lol im sorry bro, didnt meant to derail it. good luck on the build. get some Cleveland heads on that

795.0pacecar · May 28, 2008

Yeah I'm kind of a dick because I've been on these forums too damn long........

MikeROD16 · May 28, 2008

oh, my bad, just remembered ur going for AFR's. Much better choice

BK_CAULEY · May 28, 2008

MikeROD16 said:
yep lol. well, we all learn from our mistakes. and as for the OP, lol im sorry bro, didnt meant to derail it. good luck on the build. get some Cleveland heads on that

WRONG its a windsor motor not a modified.

My 351 build with pics

MikeROD16

Member

795.0pacecar

lover of pudgy polygamists

bentley429

Banned

blackened88lx

Active Member

stykthyn

I want to measure mine. It doesn't look that tall.

5.0Torx

Active Member

SMOKEDYA

stykthyn

I want to measure mine. It doesn't look that tall.

MikeROD16

Member

795.0pacecar

lover of pudgy polygamists

SMOKEDYA

SMOKEDYA

Mr. Rustypwnz

Advanced Member

MikeROD16

Member

MikeROD16

Member

25thmustang

Mustang Master

MikeROD16

Member

795.0pacecar

lover of pudgy polygamists

MikeROD16

Member

BK_CAULEY

it's built for speed not longevity, woman

Similar threads

My 351 build with pics

Member

lover of pudgy polygamists

Banned

Active Member

I want to measure mine. It doesn't look that tall.

Active Member

I want to measure mine. It doesn't look that tall.

Member

lover of pudgy polygamists

Advanced Member

Member

Member

Mustang Master

Member

lover of pudgy polygamists

Member

it's built for speed not longevity, woman

Similar threads

Privacy & Transparency

Privacy & Transparency