• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

My cat is rattling - Question for catted MRT H-pipe owners

  • Thread starter Thread starter NasaGT
  • Start date Start date Sep 8, 2004

NasaGT

Founding Member
Sep 19, 2002
1,993
2
49
Virginia
Sep 8, 2004
#1
  • Sep 8, 2004
  • #1
The passenger side cat on my MRT H-pipe is rattling like mad. I sent email to the boys at MRT to find out what the warranty on the cats was, and they said I should have been sent two warranty cards with the mid-pipe. I keep everything for the parts I buy for the car, but I didn't have the cards. MRT said they would send me some new ones pronto. Those guys give great service.

My question is what does the warranty card say? I've had the mid-pipe on for about 9 months now, but only 2K miles - am I still under some kind of warranty for the cats??? I remember hearing that they were Magnaflow cats, but am not sure. I guess thats on the card.

Thanks!
 

DTMach1

New Member
Jun 14, 2004
240
0
0
Virginia Beach, VA
Sep 8, 2004
#2
  • Sep 8, 2004
  • #2
usually the warranty card guarantees the cats for 50k miles or something close to that. It also states that you changed your old cats out due to a faulty cat. or you're car is past 75k miles.
 

MNDZA

Banned
Apr 21, 2004
57
0
0
Chicago
Sep 8, 2004
#3
  • Sep 8, 2004
  • #3
That's crazy!!!
I just had that same exact problem. I have the MRT Catted H-Pipe and the passenger side cat was rattling. I called them up and they sent me a new H-Pipe and are waiting for me to ship the old one back. I had to pay another damn installation fee. This must be a known issue. I had it on for only 4 months and less than 4000 miles. This must be a known issue and if it happens again, I will be soooooooo pissed off. They should give me my money back and buy me a stock H-Pipe and pay for all my installation costs. Any update on your situation?
 

pdl2flr

New Member
Dec 17, 2003
154
0
0
Leesburg, VA
Sep 8, 2004
#4
  • Sep 8, 2004
  • #4
I have had mine on for about 6K miles so far and no problems. About a month or so ago I thought I heard some rattling that I thought was the cats but I think it was just engine noise. Once I installed my Steeda T/A the noise seemed to have gone away. The T/A did seem to smooth out my engine.
 

trinity_gt

10 Year Member
Jan 31, 2003
3,125
81
99
Canada
Sep 8, 2004
#5
  • Sep 8, 2004
  • #5
Hmm. MRT catted H here. I swear I can hear a rattle from the driver's side cat when I close the door. Seems to only do it hot and come to think of it, I haven't heard this in a while. I thought it might be the heat shield but now I'm wondering... I hear the cats are just Magnaflow high-flow units. Anyone with Magnaflow Xs having trouble?

I don't recall getting any warranty card either. I'd probably end up just buying some hi-flo jobs and having them welded in. Can't be bothered to take the pipe out of the car, pack it up and send it back...

<*keeps an eye on his cats*>
 

NasaGT

Founding Member
Sep 19, 2002
1,993
2
49
Virginia
Sep 8, 2004
#6
  • Sep 8, 2004
  • #6
MNDZA said:
That's crazy!!!
I just had that same exact problem. I have the MRT Catted H-Pipe and the passenger side cat was rattling. I called them up and they sent me a new H-Pipe and are waiting for me to ship the old one back. I had to pay another damn installation fee. This must be a known issue. I had it on for only 4 months and less than 4000 miles. This must be a known issue and if it happens again, I will be soooooooo pissed off. They should give me my money back and buy me a stock H-Pipe and pay for all my installation costs. Any update on your situation?
Click to expand...

Wow - I think I'll call MRT in just a moment. I installed it myself, so the I don't really mind re-installing a new one. In fact I think I'd rather have a new one so I don't have to take it somewhere to have the replacement cat welded in.
 

NasaGT

Founding Member
Sep 19, 2002
1,993
2
49
Virginia
Sep 8, 2004
#7
  • Sep 8, 2004
  • #7
Just called them - the guy I talked to said he'd send me the warranty cards and then make sure to work with me and Magnaflow to make sure it was taken care of. So no replacement H-pipe.

Oh well, I hope the card gets here soon so I can get this thing fixed. The rattle is so loud I can't stand to drive the car.
 

Premium Speed

New Member
Apr 22, 2003
1,006
0
0
Houston, Texas
Sep 9, 2004
#8
  • Sep 9, 2004
  • #8
NasaGT said:
Just called them - the guy I talked to said he'd send me the warranty cards and then make sure to work with me and Magnaflow to make sure it was taken care of. So no replacement H-pipe.

Oh well, I hope the card gets here soon so I can get this thing fixed. The rattle is so loud I can't stand to drive the car.
Click to expand...

have you gotten under the car and banged on the cat to duplicate the sound?

i had a rattle shortly after i installed my magnaflow catted x-pipe and it turned out to be the clutch inspection cover on my bellhousing...the rubber wore off of the sides and it was a little loose...just trying to help
 

blueovalguy

Active Member
Aug 20, 2002
1,364
0
36
York Haven, Pa.
Sep 9, 2004
#9
  • Sep 9, 2004
  • #9
I was one of the first to get the MRT catted H, and have had no problems with mine. It's been on there over a year and 10,000 miles.
 

NasaGT

Founding Member
Sep 19, 2002
1,993
2
49
Virginia
Sep 27, 2004
#10
  • Sep 27, 2004
  • #10
Premium Speed said:
have you gotten under the car and banged on the cat to duplicate the sound?

i had a rattle shortly after i installed my magnaflow catted x-pipe and it turned out to be the clutch inspection cover on my bellhousing...the rubber wore off of the sides and it was a little loose...just trying to help
Click to expand...

Yeah, I climbed under it and when I bang on the cat it makes a chit load of noise.

The bad news is its three weeks later, and no warranty card has shown up in the mail. The rattle is so loud I'm only driving the car once a week just to keep the battery charged up. This morning a SES light came on - my money its the cat.

Guess I need to call MRT and find out what the dealeo is.
 
T

Too Slow

New Member
Jan 23, 2004
209
0
0
Houston, TX
Sep 27, 2004
#11
  • Sep 27, 2004
  • #11
i've been hearing a rattle under my car since i put on my bassani catted x
 
E

EJ23

New Member
May 17, 2004
25
0
0
Sep 27, 2004
#12
  • Sep 27, 2004
  • #12
Just gut them!
 

NasaGT

Founding Member
Sep 19, 2002
1,993
2
49
Virginia
Sep 27, 2004
#13
  • Sep 27, 2004
  • #13
Update - I called MRT today and they are sending me a cat tomorrow. They're going to charge me for the cat a whopping $36, and then they'll refund the cost when they receive the busted cat. I'm happy.

As best as I can tell, when I first contacted them about this, they didn't know how they wanted to handle bad cats, they even mentioned they were discussing this with Magnaflow at the time. So I think I got lost in the mix.

Can't wait to get rid of this aweful rattle.
 

tl75keith

New Member
Jul 20, 2004
69
0
0
Owings Mills, MD
Sep 28, 2004
#14
  • Sep 28, 2004
  • #14
I tried this MRT pipe....had it on for one night The driver side cat fit so close to the floor pan I had to stop the car (no joke) so my feet could cool off. Called MRT and bitched about the poor fitment and had to pay to send it back for them to measure the pipe and see if it was a manufacturing defect. Was called back a week later saying the pipe was true and my car must be screwed up . Stock H, Mac Prochamber, and now my Bassani X with cats all fit fine (and all installed by me).

I've since read other people have had problems with the cats fitting against the car. To me MRT=
 
You must log in or register to reply here.

Similar threads

Drive Shaft/Rear Diff Issue on 2014 GT
  • DudeStang
  • Jun 16, 2025
  • 2010 - 2014 Specific Tech
Replies
11
Views
1K
2010 - 2014 Specific Tech Jan 21, 2026
gkomo
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
1K
Fox 5.0 Mustang Tech Oct 16, 2024
89ripper
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
H
Hello all from my shop, Tod/ Tods Hot Rods, located in Moorpark CA 93021. Longtime 25 Yr Restoration/Performance Shop and Custom Builder Owner. Tod
  • Hot Rod Tod
  • May 28, 2024
  • The Welcome Wagon
Replies
2
Views
1K
The Welcome Wagon May 28, 2024
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?