• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need a little help

  • Thread starter Thread starter -ben-
  • Start date Start date Apr 18, 2006
B

-ben-

New Member
May 4, 2005
21
0
0
Apr 18, 2006
#1
  • Apr 18, 2006
  • #1
Ok... there are so many threads on how to properly adjust a clutch cable.... but here is how I did mine... I always adjusted a cable clutch by how the pedal feels. Right now I have no free slack in the pedal. There is a soft spot until you get about even with the brake pedal, when it gets a real firm area, then goes down pretty easy after that. This normally worked ok for me.

Now, here are my two problems: 1. When I let the clutch out completely, I can barely hear it making the tiniest noise, this is ok, right? or should it be completely silent? And 2: When I push the clutch all the way to the floor, and move it back and forth about an inch, it is making a squeaking noise, and this is when the car is off, not running. Im not sure if something is rubbing, or if there is something wrong with the adjustment. I have a summit racing adjustable cable, because my first one broke (Found out that it was probably binding up on something after seeing how easily new cable disengaged clutch.)
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 19, 2006
#2
  • Apr 19, 2006
  • #2
For number two, do you think it's the pivot bushing for the pedal?

I wouldnt sweat #1 but I havent had the issue myself.
Where is the point of engagement? SOunds like it's at about halfway down or a little more.

Good luck.
 
B

-ben-

New Member
May 4, 2005
21
0
0
Apr 19, 2006
#3
  • Apr 19, 2006
  • #3
the noise is coming from the bellhousing. I don't think it is from the pivot bushing in the pedal.
 
B

-ben-

New Member
May 4, 2005
21
0
0
Apr 21, 2006
#4
  • Apr 21, 2006
  • #4
Any more suggestions guys?
 
You must log in or register to reply here.

Similar threads

T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
280
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech Oct 12, 2026
limp
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
744
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
2000 GT-Front Brakes Not Releasing
  • stormsedge
  • Aug 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
254
1996 - 2004 SN95 Mustang -General/Talk- Aug 7, 2026
Bronco2fan
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?