need help.... 04 gt with my novi 1k and a horrible dyno

hotmustang331 · Jan 30, 2009

Yea without a pulley there is NO WAY you will get 465RWHP out of a terminator. I dont care if you throw in 25*s of timing on race gas...no way, no how....even if you had every other bolton out there.

Those guys are loosers...I would never EVER go back.

Hey your car still runs correct right? Want to make sure they didnt jack up your car.

tag4car · Jan 30, 2009

Feel free to post up the name of this place, It might already have a reputation, Your story is starting it off pretty strong in the direction

98COBRA281 · Jan 30, 2009

they are BS the numbers to make money, my buddys 03 cobra with 14psi pulley, intake, cat back, and tune put down 440rwhp......

tag4car · Jan 30, 2009

98COBRA281 said:
they are BS the numbers to make money, my buddys 03 cobra with 14psi pulley, intake, cat back, and tune put down 440rwhp......

that seems low too, 465 +/- sounds closer to home there, Maybe it's hurting on the stock midpipe

mustangman9812 · Jan 30, 2009

They are telling you low numbers so they can get some money off of you. Prob if you buy there "Tune" they will then tell you your real numbers and be like "Yep our tune got you 85rwhp" lol which is a joke.

RUN AWAY find a good shop and never go back

98COBRA281 · Jan 30, 2009

tag4car said:
that seems low too, 465 +/- sounds closer to home there, Maybe it's hurting on the stock midpipe

yeah it has the stock midpipe, it was like 85 degree heat, and 95% humidity tho....

tag4car · Jan 31, 2009

98COBRA281 said:
yeah it has the stock midpipe, it was like 85 degree heat, and 95% humidity tho....

Ahh, yeah that probably didn't help to much. that and heatsoak from the other runs

04YELLOWGT · Jan 31, 2009

I have a car that always dynos low. Though this shop may be dicking you over it could be the car just doesn't lay the numbers down. A dyno is tool for tuning and it doesn't matter if the car puts down 30rwhp or 3000rwhp all that matters is what you run at the track. That tells you what you car can do.

zxninjarr · Jan 31, 2009

mustangman9812 said:
They are telling you low numbers so they can get some money off of you. Prob if you buy there "Tune" they will then tell you your real numbers and be like "Yep our tune got you 85rwhp" lol which is a joke.

RUN AWAY find a good shop and never go back

That's right, and I wasn't expecting higher numbers anyways but when I asked the tuner,to tell me base on his experience what could b going on with the car he seems like 285 was normal for a mustang with blower...I said hey paxton said at least a 330whp at 6psi with just the blower and a paxton mail in tune,so why the guy that owned my car before got 42lbs injectors,a boost a pump and a fuel pump if he dynoed like that..and base on research I did with diablo my chip the delta revolution black color can only be tuned at a performance shop on the dyno, i. Been trying to find out who owned the car before but my dealer said its been too long and they don't have the info...so I'm outta luck....but mann its depressive none the less, to see your car dynoed like that with a blower and feeling like its pulling like a champ...

Posted via Mobile Device

zxninjarr · Jan 31, 2009

tag4car said:
Feel free to post up the name of this place, It might already have a reputation, Your story is starting it off pretty strong in the direction

Ohh yeahh I will post the shop name ,address and phone number so people can be aware of it...but I want to make sure with another dyno first..just in case there's something wrong with the engine ,and I give the shop a bad rep. To my knowledge there's no engine knock.the car pulls hard through the rpms..engine sounds smooth at idle and healthy at full throttle,blower spools when boosting,always use syntetic oil,and 93octane,I only open her up when necessary..has a rev limiter at 62k..hit it only twice

Posted via Mobile Device

mustangman9812 · Jan 31, 2009

Where you located?

I had a shop do the same thing to me

zxninjarr · Jan 31, 2009

mustangman9812 said:
Where you located?

I had a shop do the same thing to me

seattle,wa..so what they did to you?

Posted via Mobile Device

mustangman9812 · Jan 31, 2009

No i live in Western North Carolina, was just wondering a shop did do the same thing to me though. I laughed in there face and drove off.

zxninjarr · Jan 31, 2009

mustangman9812 said:
No i live in Western North Carolina, was just wondering a shop did do the same thing to me though. I laughed in there face and drove off.

so a shop play with your dyno numbers?....what hp they told you

Posted via Mobile Device

myponyrocks · Jan 31, 2009

my Novi 1200 with full bolt ons made 360/360 at 5-6#s of boost... (Haven't dyno'd it here at sea level yet where it's making 8-9#s now)

Go to another shop as has been suggested.

Good luck

Oh and you don't want to be using a full Synthetic oil with forced induction.

trinity_gt · Jan 31, 2009

myponyrocks said:
Oh and you don't want to be using a full Synthetic oil with forced induction.

Why not?

myponyrocks · Jan 31, 2009

trinity_gt said:
Why not?

With thinner oil blow by issues become more predominant. Dual blend, or straight oil is best to keep the ammount of oil that bypasses the PCV to a minimum.

hotmustang331 · Jan 31, 2009

myponyrocks said:
my Novi 1200 with full bolt ons made 360/360 at 5-6#s of boost... (Haven't dyno'd it here at sea level yet where it's making 8-9#s now)

Go to another shop as has been suggested.

Good luck

Oh and you don't want to be using a full Synthetic oil with forced induction.

Man those are good #s for 5PSI!

SaleenGT2001 · Feb 1, 2009

hotmustang331 said:
Man those are good #s for 5PSI!

damn sure is!

Mike97gt · Feb 1, 2009

myponyrocks said:
With thinner oil blow by issues become more predominant. Dual blend, or straight oil is best to keep the ammount of oil that bypasses the PCV to a minimum.

a full synth is no thinner than a standard oil of the same weight/viscosity

on a car that sees much higher cylinder pressures than a NA car would see I would run nothing but full synth..

You can go to a thicker oil instead of the 5/20 that these cars normally use..

need help.... 04 gt with my novi 1k and a horrible dyno

hotmustang331

Active Member

tag4car

Member

98COBRA281

tag4car

Member

mustangman9812

98COBRA281

tag4car

Member

04YELLOWGT

Active Member

zxninjarr

New Member

zxninjarr

New Member

mustangman9812

zxninjarr

New Member

mustangman9812

zxninjarr

New Member

myponyrocks

I have more billet on the Stang than most women ha

trinity_gt

myponyrocks

I have more billet on the Stang than most women ha

hotmustang331

Active Member

SaleenGT2001

Well-Known Member

Mike97gt

it doe snot

Similar threads

need help.... 04 gt with my novi 1k and a horrible dyno

Active Member

Member

Member

Member

Active Member

New Member

New Member

New Member

New Member

I have more billet on the Stang than most women ha

I have more billet on the Stang than most women ha

Active Member

Well-Known Member

it doe snot

Similar threads

Privacy & Transparency

Privacy & Transparency