• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need help removing broken copper pipe

  • Thread starter Thread starter diablostang
  • Start date Start date Mar 9, 2006

diablostang

New Member
Sep 21, 2004
425
0
0
Raleigh, NC
Mar 9, 2006
#1
  • Mar 9, 2006
  • #1
Here's what happened. I've just finished up putting a 89 engine in a 94 Mustang, among the differences was the oil-sending unit pipe. When I put the A/C & P/S bracket on, it broke the oil sending unit pipe, thus creating a BIG oil leak when I fired the car up. I carefully tried unscrewing the pipe, but it was too far broken... The end is now in the block still.

Need suggestions on how to remove it without drilling it out? Bear in mind this is in somewhat cramped quarters, below the A/C and Power Steering bracket, by the oil filter.



 

Attachments

  • oilsender7wi.webp
    2.8 KB · Views: 160
  • oilsenderpipe6br.webp
    2.8 KB · Views: 171

diablostang

New Member
Sep 21, 2004
425
0
0
Raleigh, NC
Mar 9, 2006
#2
  • Mar 9, 2006
  • #2
Nevermind. I took a drillbit that was JUST too big to fit in, pushed it in and turned the drill on reverse. It dug into the copper, and unscrewed it nicely.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Mar 9, 2006
#3
  • Mar 9, 2006
  • #3
Stop by your favorite parts store and pick up an easy out. You can take your piece of copper pipe with you to ensure you get one that fits well. You'll usually find them in the same section of the store as the Heli-Coils. Using some heat to break the threads loose first might be a good idea so long as you don't burn the car down.

An alternative (if plan A doesn't work) is to drill the copper out as close to the threads as possible (without damaging the threads) then pick out the remaining copper with dental tools (or some reasonable facsimile thereof).

Good Luck
 
You must log in or register to reply here.

Similar threads

B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
750
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Sep 13, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?