• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help with gt40 iron spring upgrade quick

  • Thread starter Thread starter 89 notch rocket
  • Start date Start date May 7, 2008
8

89 notch rocket

New Member
Apr 10, 2008
3
0
0
May 7, 2008
#1
  • May 7, 2008
  • #1
i searched on the topic and thumper has good info but i need a quick drop in replacement my car is floating the valves with stock shortblock and e303 cam
they have stock springs and i though the would be strong enough in the past i ran e7s with f303 and had no problem. is the trick flow upgrade set pretty good choice? also one guy said he was using crane which are 20 cheaper im on a budget. but the crane has diffrent installed height what should the installed height be on gt4s there 3 bar supposed to be of 95 cobra. i need to order today im going to cruise week in ocean city next week thanks guys for the info
 
5

5.0ina66

Member
Jun 6, 2003
664
0
16
Ohio
May 7, 2008
#2
  • May 7, 2008
  • #2
89 notch rocket said:
i searched on the topic and thumper has good info but i need a quick drop in replacement my car is floating the valves with stock shortblock and e303 cam
they have stock springs and i though the would be strong enough in the past i ran e7s with f303 and had no problem. is the trick flow upgrade set pretty good choice? also one guy said he was using crane which are 20 cheaper im on a budget. but the crane has diffrent installed height what should the installed height be on gt4s there 3 bar supposed to be of 95 cobra. i need to order today im going to cruise week in ocean city next week thanks guys for the info
Click to expand...

What about these\
http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS-M-6513-A50&N=700+115&autoview=sku

Then again, I don't know that they're any better than stock, but I think they are
 

thumper460

Founding Member
Jul 24, 2000
3,022
2
56
Orange Park , Fl
May 7, 2008
#3
  • May 7, 2008
  • #3
Shoot me an email... or pm!! cool?? I have a package that will carry the cams you are looking at... they DROP in!! and they come WITH moly retainers and keepers!! cool??
www.thumperoforangepark.com.. hope this helps!!

Just me..........................

Thumper
 
You must log in or register to reply here.

Similar threads

Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2026
Ryu
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
492
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Engine 302 production block selection
  • FastDriver
  • May 19, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
48
Views
8K
Fox 5.0 Mustang Tech Jul 1, 2025
FastDriver
GT40 Heads Issues
  • PonyGTrider
  • Jan 23, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 27, 2023
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?