• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

SN95 Need Help

  • Thread starter Thread starter Mike Barton
  • Start date Start date Jan 25, 2017

Mike Barton

New Member
Apr 25, 2016
9
0
1
Jan 25, 2017
#1
  • Jan 25, 2017
  • #1
okay the car is a 95 gt 5.0 5spd it has a 4.10 but I'm putting in a 373, it has a powerdyne supercharger 10# it has a gt40 tubular intake ported lower 75mm tbody and a mega squirt3 ecu, and a stock lower end, what are the best heads and what size, what size injectors should I go with and what cam, just looking to get the most power possible! Thank you
 

Mike Barton

New Member
Apr 25, 2016
9
0
1
Jan 26, 2017
#2
  • Jan 26, 2017
  • #2
And I am having a c4 built for it
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Jan 26, 2017
#3
  • Jan 26, 2017
  • #3
Oh the guys here are going to love this thread.

@84Ttop @MikeH686 @TOOLOW91 @mikestang63 @a91what
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,733
6,716
214
Hillsborough county
Jan 26, 2017
#4
  • Jan 26, 2017
  • #4
Welcome to Stangnet!

I am the resident megasquirt guru so I can help with all your tuning and setup needs, when the time comes.

What are the best heads? That's a tough one... you are sporting a stock bottom end with xxxx miles on it and 10psi..... a set of TF170 will probably be your best hp per dollar. You will likely be able to break the 400 rwhp mark with 10psi 93 octane and aggressive timing (will take the correct cam to do so as well)

Remember detonation kills as do harmonics..... keeping a stock bottom end together at that power level (albeit low by today's standards) will rely on a safe tune.
 
Reactions: mikestang63 and RaggedGT

MikeH686

Mine is only two inches though.
10 Year Member
Oct 11, 2011
2,843
1,753
184
Waldorf, MD
Jan 26, 2017
#5
  • Jan 26, 2017
  • #5
Welcome ... first off we need to know what you wanna do with the car. Secondly no matter the head choice you make the gt40 intake will be the choke point. As far as cams you might want to give ed Curtis a call @Davedacarpainter you remember his company name? Like fti or something the price of off the shelf cams you spend less then a 100 bucks more and you get a cam custom for your setup and that's always key there. What kind of suspension mods do you have? Also get ready to put some 60# injectors in there. This is what happens when you boost a forged bottom end without the proper fuel.
 
Reactions: mikestang63 and a91what

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Jan 27, 2017
#6
  • Jan 27, 2017
  • #6
MikeH686 said:
Welcome ... first off we need to know what you wanna do with the car. Secondly no matter the head choice you make the gt40 intake will be the choke point. As far as cams you might want to give ed Curtis a call @Davedacarpainter you remember his company name? Like fti or something the price of off the shelf cams you spend less then a 100 bucks more and you get a cam custom for your setup and that's always key there.
Click to expand...
Flow Tech Industries
 
Reactions: mikestang63

MikeH686

Mine is only two inches though.
10 Year Member
Oct 11, 2011
2,843
1,753
184
Waldorf, MD
Jan 27, 2017
#7
  • Jan 27, 2017
  • #7
Yep that's it
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 27, 2017
#8
  • Jan 27, 2017
  • #8
welcome to Stangnet! ( don't forget to pay your inititiation dues while you're at it)

Here's my 2 cents

You will not notice any difference in going from 4.10 to 3.73's. and IMO not worth the effort or money. What is the reason for this?
I am assuming you have a T5
You did not mention anything about brakes, suspension, charging, cooling systems
Is this car a DD, weekend toy, street strip car?
what's your budget

I've seen posts from thousands of guys who want the "most power" but that is not always the best thing. You want the best combination of power, reliability, driveability and durability. Going for the most power often results in broken parts or poor reliability. As stated, once you start going over 400rwhp you are playing the dice with a stock block. Spinning a powerdyne for 10# of boost is also IMO a little excessive as they are entry level geared for 5-6# on a stock motor.

If it were me, and how I build my cars is I take care of the suspension and braking first- that way the car can handle the extra powe. I would also repace the stock alternator with a 3G. Then you can look to increase the power by matching the proper parts along with what your goal and budget are. These cars have terrible stock brakes and suspension, and throwing another 100 hp on them is asking for trouble.

Know that when you start adding HP with better heads and cam you are also going to need to address your

cooling
clutch or AOD
exhaust
MAF
Injectors
balancer

IT adds up quickly. So, we are back to-what is your budget and goal. We can show you options from $1000 to $200000.
 
Reactions: General karthief and Davedacarpainter

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 27, 2017
#9
  • Jan 27, 2017
  • #9
With you needing to get rid of the gt40 tubular , I can go ahead and make you a deal on it
 
You must log in or register to reply here.

Similar threads

Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
399
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
C
Dyno day! # guesses?
  • clayton seiders
  • Aug 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
657
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2025
Scrapla347
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?