• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

new '91 LX stalling

  • Thread starter Thread starter mdshumaker
  • Start date Start date Sep 15, 2006
M

mdshumaker

New Member
Sep 15, 2006
1
0
0
Sep 15, 2006
#1
  • Sep 15, 2006
  • #1
This if my first post in this Stang specific forum.
I just bought a 1991 2.3L LX for my son. Overall the car runs great. However, I have had it stall on me at traffic lights when I step on the gas.
I notice that it does idle abit rough when at a light. If you ease it away it will often stumble abit. If you just tramp it, it seems to get away better.
I friend that works at a Goodyear garage suggested removing the EGR valve hose and plugging it as a test. He says that the EGR may not be working and plugging the hose would probably make the engine idle smoother, thus pointing to the EGR as the problem.
This sounds like a logical test.
What other thoughts do you'll have, since you've worked on these 2.3's much more than I.
Oh, also, where exactly is the EGR. I have not yet purchased a service manual on this engine to locate this item.
Marc
 
S

Shinlee

New Member
Feb 10, 2006
146
0
0
Sep 15, 2006
#2
  • Sep 15, 2006
  • #2
instead of plugging it, how bout cleaning it?

2 bolts hold it to the engine, and then the egr tube that runs to the manifold is all you have to remove. very simply, take some carb and choke cleaner and go nuts with it.
 

Brantley

Founding Member
Feb 29, 2000
1,329
0
0
Memphis, TN
Sep 16, 2006
#3
  • Sep 16, 2006
  • #3
But if the EGR valve itself is bad, cleaning or plugging the hose probably won't do too much. He really needs a vacuum pump so he can test whether or not the diaphragm holds vacuum or not. Could also be a bad gasket betweent the valve and manifold. What's the engine's vacuum at idle? Also sounds kinda like a mass air meter problem.. any diganostic codes (check engine light)?
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Sep 16, 2006
#4
  • Sep 16, 2006
  • #4
if the egr is malfunctioning it should be throwing CEL. I would pull the codes first
 

Brantley

Founding Member
Feb 29, 2000
1,329
0
0
Memphis, TN
Sep 16, 2006
#5
  • Sep 16, 2006
  • #5
stykthyn said:
if the egr is malfunctioning it should be throwing CEL. I would pull the codes first
Click to expand...

Depends on how it has failed.. this is still of course assuming it is the EGR. We haven't even verified that. I don't believe that the EEC-IV ECM in the Fox body Mustangs can monitor EGR FLOW.. they can, for the most part, monitor whether or not the sensor voltage drop is within specifications. I don't think it can't tell if there's a leak or excessive flow.
 
B

BELL

Founding Member
Feb 21, 2002
722
0
0
California
Sep 16, 2006
#6
  • Sep 16, 2006
  • #6
i would agree with brantley i'm sure the eec 4 runs on voltage references rather then actualy data. it would take a sensor comming way out of voltage range to thro CEL. however if somthing was an int. problem and not consistant then i wouldnt exepct to see the CEL on all the time
 
8

88gtking

New Member
Mar 7, 2012
1
0
1
Mar 7, 2012
#7
  • Mar 7, 2012
  • #7
mdshumaker said:
This if my first post in this Stang specific forum.
I just bought a 1991 2.3L LX for my son. Overall the car runs great. However, I have had it stall on me at traffic lights when I step on the gas.
I notice that it does idle abit rough when at a light. If you ease it away it will often stumble abit. If you just tramp it, it seems to get away better.
I friend that works at a Goodyear garage suggested removing the EGR valve hose and plugging it as a test. He says that the EGR may not be working and plugging the hose would probably make the engine idle smoother, thus pointing to the EGR as the problem.
This sounds like a logical test.
What other thoughts do you'll have, since you've worked on these 2.3's much more than I.
Oh, also, where exactly is the EGR. I have not yet purchased a service manual on this engine to locate this item.
Marc
Click to expand...
Hi ther mark I agree try cleaning the egr valve Instead also check to see if you have any vaccine leaks anywhere!!
 
You must log in or register to reply here.

Similar threads

S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
733
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
  • Locked
93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • The Welcome Wagon
Replies
15
Views
578
The Welcome Wagon Oct 28, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
748
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
923
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?