• Community Forums
  • Regional Forums and Event Information

New Best

  • Thread starter Thread starter Girl22
  • Start date Start date Oct 3, 2005
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Oct 3, 2005
#41
  • Oct 3, 2005
  • #41
TGJ said:
That is fine and dandy, however there are street cars pushing over 7000 RPMS on the stock crank, with no issues. KenB who had the fastest N/A 2V used the stock crank in his car and it went past 7500 RPM without issue.

There is quite a few builder's who have pushed the limits of the 2V crank and have not broke it. Just because 1 builder says it is bad doesn't mean it is. Tim is not always right and this is one of those cases.
Click to expand...
While the cranks are rather tough, the biggest worry about over reving the 4.6 is PTV contact if you still have the stock heads/springs. Some people have gotten away with it, others haven't.
 
T

TGJ

New Member
Mar 30, 2005
1,049
4
0
Oct 3, 2005
#42
  • Oct 3, 2005
  • #42
CanadaStang said:
While the cranks are rather tough, the biggest worry about over reving the 4.6 is PTV contact if you still have the stock heads/springs. Some people have gotten away with it, others haven't.
Click to expand...

You are close, the biggest thing I have heard with over revving the 4.6 is valve float, which causes PTV which causes bent rods which causes failed cranks. When that happens, it doesn't matter which crank you have. Some get away with it, others don't.
 
T

TGJ

New Member
Mar 30, 2005
1,049
4
0
Oct 3, 2005
#43
  • Oct 3, 2005
  • #43
When the TBird project is done and paid for, I will start one for the 3V and it will include forged internals.

I just haven't decided which route to go with the red Pony.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Oct 3, 2005
#44
  • Oct 3, 2005
  • #44
TGJ said:
You are close, the biggest thing I have heard with over revving the 4.6 is valve float, which causes PTV which causes bent rods which causes failed cranks. When that happens, it doesn't matter which crank you have. Some get away with it, others don't.
Click to expand...

Actually I'm closer than close, cause that's what I just said I haven't had too many whacked 4.6's come into the shop b/c of over reving, but the 3 that I have had were all from PTV from valve float.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Oct 3, 2005
#45
  • Oct 3, 2005
  • #45
TGJ said:
When the TBird project is done and paid for, I will start one for the 3V and it will include forged internals.

I just haven't decided which route to go with the red Pony.
Click to expand...

Very nice Stang by the way I really like that color!
 
T

TGJ

New Member
Mar 30, 2005
1,049
4
0
Oct 3, 2005
#46
  • Oct 3, 2005
  • #46
Well you didn't mention valve float initially which causes the PTV. If the valves don't stay open at the higher RPM's, you don't get the PTV. That is why I said you were close.

Thank you for the comment on the Stang.
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Oct 3, 2005
#47
  • Oct 3, 2005
  • #47
TGJ said:
Well you didn't mention valve float initially which causes the PTV. If the valves don't stay open at the higher RPM's, you don't get the PTV. That is why I said you were close.

Thank you for the comment on the Stang.
Click to expand...
Sorry my bad, sometimes I just assume everyone knows what I'm talking about.
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Oct 3, 2005
#48
  • Oct 3, 2005
  • #48
Everybody play nice!!!!! Very nice times Girl22! You'll be breaking into the 13's next year I'm sure.
 
D

DELUXE MW

New Member
Dec 31, 2003
105
0
0
Melville Saskatchewan Canada
Oct 6, 2005
#49
  • Oct 6, 2005
  • #49
Wow that's a good time good job! I wish I could shift a stick good enough to run a manual if I didn't care about the transmission I would probably be able to shift better or is it faster? better is granny shifting I guess heheheheh anyways good stuff its good to see more and more girls showing up at the races it makes for a better weekend when the GF can run too instead of sitting around watching next year she will run my truck! then I gotta step it up or I'm going to get my arse kicked
 
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
You must log in or register to reply here.

Similar threads

New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
279
The Welcome Wagon Oct 19, 2025
Clutchfork
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
655
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
925
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
E
Nightmare after tune install!
  • EnemyofTyranny
  • Mar 29, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
415
2005 - 2014 S-197 Mustang -General/Talk- Apr 12, 2025
89ripper
Share:
Bluesky Email Share Link
  • Community Forums
  • Regional Forums and Event Information
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?