New dyno #s , Damn this is crazy !!!

Slow5.0 · Sep 11, 2005

Well like most of you guys know i have a lot of little things done to my Stang ,everything BUT TB, yeah thats right i was still runing stock 60mm TB runing 12.8s and pulling 292HP/328TQ
So i did research http://forums.stangnet.com/showthread.php?t=545086&highlight=throttle+body what size TB i need, 65mm was out off game so 70mm vs 75mm and most guys said 75mm is too big and its over kill on stock bottom end and N/A except one guy Grn92LX ,he said get 75mm,
And i got one for cheap, it was good deal , BBK 75mm a few months old, same day i swaped and took on street, i could heard air is rushing into intake carzy , i was like wow

So today i decide to take to dyno and do a few puls with same tunes like last time except for fixed A/R because with new TB it was little bit off

First pull was 34* 311.9HP / 338.8TQ
Second 32* 309.7HP / 341.2TQ
Third 30* 308.0 HP / 340.5TQ

A/F was same in all three runs and it was safe

So i hit that 300HP bar ,and it went even over 311HP , not bad for B-31 AFM blower can on N/A 302

I will post videos soon
Here is new and old dyno sheet

RIO5.0 · Sep 11, 2005

Yowza !!!! Nice nmumbers there....and TF heads.OTF cam to boot....

donkey_punch · Sep 11, 2005

wow 20 horse just from the TB swap. nice

YEAHLOH95 · Sep 11, 2005

wow nice gains that must have been your bottle neck

V8SHME8 · Sep 11, 2005

How do you like that B-31 cam? I was considering putting it in my daily as it is the first reasonable cam that is supposed to be more 94-95 friendly. I realize you have the tweeker, but I was curious what you thought never the less.

Swarzkopf · Sep 11, 2005

Nice numbers Ernie! What a gain.

BTW, I'm enjoying the Cobra manifold.

Killercanary · Sep 11, 2005

WTG Ernan!!! That is CRAZY! It should make for some great times in this cool fall air!

Slow5.0 · Sep 11, 2005

V8SHME8 said:
How do you like that B-31 cam? I was considering putting it in my daily as it is the first reasonable cam that is supposed to be more 94-95 friendly. I realize you have the tweeker, but I was curious what you thought never the less.

I wouldn't get this cam without chip, it was fine first a few weeks agter i installed cam,but than start die on me at every light, idle is kinda crazy, like it says on AFM website below 1900rpms

Killercanary said:
WTG Ernan!!! That is CRAZY! It should make for some great times in this cool fall air!

I know, and i did those 3 runs in short time and i did them 5 min after i come from HWY so motor was hot
Last night i had little bit fun ,no traction because nittos don't like below 70F ,it was 00 Trans Am WS6 (exhaust,geard intake and some other mods) and two nights ago 04 Cobra with Nittos

DFG 5OH · Sep 11, 2005

not bad, better than my last dyno

Grn92LX · Sep 11, 2005

Just doing my job Ernie

That is awesome man. Glad to see your happy. If you're happy, so am I. Thanks for taking my "big" advice. Thats 2 positive 75mm tb dyno results on 302's with in 2 weeks

nmcgrawj · Sep 11, 2005

Good to hear it Ernie!

95snoozer · Sep 11, 2005

great man, your poser is nose diving up top with that intake thoughh. and did you opdn your cobra intake to the 75mm tb?

an intake that pulls higher would do you well, ported performer

5spd GT · Sep 11, 2005

Nice gain...never claimed less power with a 75mm TB.

I'm glad you finally swapped to an aftermarket TB from that stock one...needed for sure.

final5-0 · Sep 11, 2005

Good Job Ernie!

Its good to see these kinds of results from all the hard work you have done to your car!

Grady

wytstang · Sep 11, 2005

Did you up grade the intake as well?? Sounds like Swarzkopf has your Cobra...

Slow5.0 · Sep 11, 2005

95snoozer said:
great man, your poser is nose diving up top with that intake thoughh. and did you opdn your cobra intake to the 75mm tb?

an intake that pulls higher would do you well, ported performer

Stock 94-95 Cobra intake elbow is 70mm, two years ago when i ported upper and lower i have elbow open to 75mm, and onece again when i bought this new TB i open elbow to 79mm

wytstang said:
Did you up grade the intake as well?? Sounds like Swarzkopf has your Cobra...

No i still runing my shiny Cobra intake , i sold Swarzkopf "Ford Motorsport SVO" intake wich is same is Cobra except name on top and that intake comes from my buddys 94 Stang

Slow5.0 · Sep 11, 2005

95snoozer said:
great man, your poser is nose diving up top with that intake thoughh. and did you opdn your cobra intake to the 75mm tb?

an intake that pulls higher would do you well, ported performer

I was thinkin about TFS Track Heat, but for now i will stick with my Cobra one, and this intake is open realy good, i went nuts when i ported this intake 2 years ago

BTW i don't wanna go with performer because i was thinkin get hair dryer

95snoozer · Sep 12, 2005

well your power is falling off a cliff up top, i needs to breath.

dont go track heat, its not a good n/a intake

Killercanary · Sep 12, 2005

95snoozer said:
dont go track heat, its not a good n/a intake

Why is that? I truely don't know that is why I am asking.

95snoozer · Sep 12, 2005

back to back dyno testing controlled temperature and tune teh street heat and track heat arent the best

New dyno #s , Damn this is crazy !!!

Active Member

Attachments

New Member

Member

Member

The car that set the bar.

Active Member

Active Member

Fidanza Man!

Advanced Member

Active Member

"the 5.0 owns all"

Mustang Master

Mustang Master

Active Member

Active Member

Active Member

The car that set the bar.

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency