New Purchases + Questions and Opinions welcome!

CobraRed_96_GT · Feb 27, 2009

-=NightHawk=- said:
to say i am envious about what youre doing would be quite the understatement

Much appreciated

mybrosride · Mar 11, 2009

-=NightHawk=- said:
to say i am envious about what youre doing would be quite the understatement

x2...

tho as you well know I've been watching from behind the scenes wtg man...

CobraRed_96_GT · Mar 11, 2009

mybrosride said:
x2...

tho as you well know I've been watching from behind the scenes wtg man...

Thanks Mark!

And since I don't like to bump the thread without some tid-bits:
Siemen Deka High Impedance 60lb injectors
The 8 bolt flex plate i bought a while ago
And a Russel y-block to split my -10 to -8 feedlines to the 5/8" rails.

mybrosride · Mar 12, 2009

gets more impressive each time I check in Chris..... thanks for the updates buddy

ADRENLN · Mar 12, 2009

i havent had a lot of time to spend on the boards anymore so i missed your thread. i only have one thing to say...........Holy Crap! awsome man....get boosted! good luck with the build

CobraRed_96_GT · Mar 13, 2009

ADRENLN said:
oly Crap! awsome man....get boosted! good luck with the build

I'm gettin there...

New custom ground VT/CMS blower cams.
Basically a 2.25 stage because it's in between a 2 and a 2.5 - by my math should help to reduce dynamic compression.

mybrosride · Mar 13, 2009

^^^
niceeeeee

CobraRed_96_GT · Mar 13, 2009

Dual bezel pods for boost/fuel pressure that im going to ghetto paint black to match stock with the same paint i used on my s281 spoiler:

mybrosride · Mar 13, 2009

CobraRed_96_GT said:
Dual bezel pods for boost/fuel pressure that im going to ghetto paint black

sounds like my buddy in OC... ghetto painting must be a SoCal thing

CobraRed_96_GT · Mar 20, 2009

These 5/8" inside dia rails are straight ridiculous, can't see how anyone would ever need that much fuel.

View attachment 265597

Fun stuff to follow in a couple weeks. I've already paid for it.

CobraRed_96_GT · Mar 20, 2009

And in case people are curious, my compression is 9.427:1
and dynamic compression is:

8.668, which isn't awesomely low - but lower than it would have been with VT stage 2 blower cams.

I added .5CC in head combustion chamber volume due to porting (stock is 42.44), would have added more if the low rpm emissions ledge was taken off which i still have.

CobraRed_96_GT · Apr 1, 2009

View attachment 263938
Good idea to have one that goes past 20psi

LaserSVT · Apr 1, 2009

CobraRed_96_GT said:
Dual bezel pods for boost/fuel pressure that im going to ghetto paint black to match stock with the same paint i used on my s281 spoiler:

Thats the same one I have, i really like it. Bit more stockish then an a-pillar IMHO

CobraRed_96_GT · Apr 1, 2009

LaserSVT said:
Thats the same one I have, i really like it. Bit more stockish then an a-pillar IMHO

I already have two A-Pillar gauges on the car
Will have Wideband/Trans on A
Fuel Pressure/Boost on bezel

LaserSVT · Apr 1, 2009

CobraRed_96_GT said:
I already have two A-Pillar gauges on the car
Will have Wideband/Trans on A
Fuel Pressure/Boost on bezel

Rice.

JK I like the A-pillar too but like the other one better is all.
See I want to monitor the fuel pressure and timing and IATs as well. I dont want a bunch of gauges so where my current boost gauge is I am gonna put another DM-100 but with the OBDII option so it can read all the paramaters straight from the ECU

CobraRed_96_GT · Apr 1, 2009

LaserSVT said:
Rice.

JK I like the A-pillar too but like the other one better is all.
See I want to monitor the fuel pressure and timing and IATs as well. I dont want a bunch of gauges so where my current boost gauge is I am gonna put another DM-100 but with the OBDII option so it can read all the paramaters straight from the ECU

Right, the guy i do tuning with uses that, put it in his rear view:

CobraRed_96_GT · Apr 1, 2009

Just got delivery on these:
High Load valve springs, i have aftermarket comp cam beehive's in now, but i need these beefier ones for teh boostage.

LaserSVT · Apr 1, 2009

I love that! I dont wana hijack your thread man but if you have info on how he did that could you please PM me or something? Thanks!

The spring look trick! What are they coated in?

CobraRed_96_GT · Apr 1, 2009

No hijack, it's my thread we can talk about whatever I want:

Go to here: DM-200 pictures

jgorm said:
I scraped it with a razor blade. It took about an hour to scrape a decent hole for the gauge using a razor blade i cut in half. That was the hardest part by far and the rest of it took maybe 30 min. I cut the hole with a hot knife and just sealed it back up with hot glue. If i feel like it later, i'll plastic "weld" it back together, but its fine for now. I used wire clippers to remove some of the pcb board that was in the way, but other than that the plx did not need any modifications other than snapping the gauge case off. It turned out pretty sweet and was not nearly as hard as i imagined it was going to be.

04sleeper · Apr 1, 2009

I have had a lot of friends have bad experiences with MMR. Especially the oil pumps blowing up! I would be careful and double check everything if I were you!

Also, I think you will have a hard time with that fuel pick up. (Looks like an old Mallory unit) With the stock tank you might have fuel slosh and suck up air. I would look into the Glens Sleeper Tank if I were you.

Good luck with your set up.

*New Purchases* + Questions and Opinions welcome!

Active Member

New Member

Active Member

New Member

Active Member

Active Member

New Member

Active Member

New Member

Active Member

Active Member

Active Member

Got FB banned again for saying nards

Active Member

Got FB banned again for saying nards

Active Member

Active Member

Got FB banned again for saying nards

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency

New Purchases + Questions and Opinions welcome!