• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

New track times

  • Thread starter Thread starter Dragstr05
  • Start date Start date Mar 3, 2007
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Mar 3, 2007
#1
  • Mar 3, 2007
  • #1
Went up to MIR in MD for a few hours for opening weekend. My best ET was a 13.93 @ 102mph, which makes it my new best. The bad thing about it though was I ran it with a 2.2 60'. My last 13.9 was with a 1.9 60'. I should have been able to get 13.6-13.7's out of it, but I kept messing up with the clutch off the line. Runs consistant 13.9's now though since the MIL's and shifter. All mods listed in sig.

I'm going to a local 1/8 mile track tomorrow that doesnt get too crowded. I should be able to get a run in roughly every 15mins if I wanted to. Today I had to wait like an hour. Provided I can get that 60' down a few tenths, its a 13.6 - 13.7 car.

Anyone have any tips for getting the best 60' on stock suspension and street radials?
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Mar 3, 2007
#2
  • Mar 3, 2007
  • #2
nothin bad about those times at all for those mods
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Mar 3, 2007
#3
  • Mar 3, 2007
  • #3
I know, but I know theres a couple tenths more left in her. Just couldnt get it to hook up. I wasnt even dumping it off the line, but as soon as I got into it, It'd just spin. Maybe it had to do with it being the first day the track was open this season?
 

Stan Weiss

Member
Dec 8, 2006
347
2
16
Philadelphia, PA
Mar 3, 2007
#4
  • Mar 3, 2007
  • #4
The problem with the 60 foot times could be the track temperature was to cold
 

droid#83853

carfax for friendship
Dec 30, 2006
28
0
0
Beating my car to death with a tire iron
Mar 3, 2007
#5
  • Mar 3, 2007
  • #5
Where is MIR? I heard there is track near Hagerstown. I joined the Northern VA Mustang Club, but I seem to get more info here.
 

04GTMustang

New Member
Feb 28, 2006
348
0
0
Stafford
Mar 4, 2007
#6
  • Mar 4, 2007
  • #6
droid#83853 said:
Where is MIR? I heard there is track near Hagerstown. I joined the Northern VA Mustang Club, but I seem to get more info here.
Click to expand...

MIR is right near buds creak motorcross track. actually its like 200 yards from it lol. their website iswww.mirdrag.com
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Mar 4, 2007
#7
  • Mar 4, 2007
  • #7
Cold track most likely. How many others were there running? What kind of cars? What was the ambient temp? I like going to Atco on a cool night after there's been a good deal of other cars "prepping" the track for me so I know I'll have good traction.
I guess it's almost time to go down and get some idea of what mine will do.
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Mar 4, 2007
#8
  • Mar 4, 2007
  • #8
katshot said:
Cold track most likely. How many others were there running? What kind of cars? What was the ambient temp? I like going to Atco on a cool night after there's been a good deal of other cars "prepping" the track for me so I know I'll have good traction.
I guess it's almost time to go down and get some idea of what mine will do.
Click to expand...

It was a test and tune session...actually it was their opening day for the season. Temp was low 60's and a little windy. I'll just have to go in the summer at a night event and see why I can pull off then.

Just got back from a local 1/8 mile track and couldnt hook up to save my life. My best et was a 9.1. One of my runs I broke loose so bad going into second I had to let off just to save from running into the guardrail and ended up with a 11.xx et. Overall the day there was terrible. Kinda obvious the track wasnt prepped at all, in the 40's temp wise. One thing that makes me feel better though was that I ran the same time as a guy with 4.10's and 275's + in the rear. I just need to hook up, stock size street radials just arent cutting it.
 

XxMustang281xX

Member
Jun 9, 2004
194
0
17
Everett, PA
Mar 4, 2007
#9
  • Mar 4, 2007
  • #9
ive been to buds creek track with my friend! haha..and i dont remember there even being a track by it...wtf..
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Mar 4, 2007
#10
  • Mar 4, 2007
  • #10
XxMustang281xX said:
ive been to buds creek track with my friend! haha..and i dont remember there even being a track by it...wtf..
Click to expand...

Yep. Just keep goin down budds creek rd past the ATV course and motocross course and its there on the right. Maryland International Raceway...nice track too.
 

04GTMustang

New Member
Feb 28, 2006
348
0
0
Stafford
Mar 4, 2007
#11
  • Mar 4, 2007
  • #11
i went to nopi down there. it was a lot of fun. I got to see a supra get raped by a 5.0 lol. my friends thought the supra would tear up that stang lol. supra ran a 10.XX 5.0 ran a 7.8 at 187 lol
 
You must log in or register to reply here.

Similar threads

M
New from North Texas
  • MFReeves
  • Aug 26, 2025
  • The Welcome Wagon
Replies
9
Views
497
The Welcome Wagon Sep 22, 2025
nickyb
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
852
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
889
Fox 5.0 Mustang Tech Oct 16, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?