New wheels and tires on the fox, PICS!!!!.....56K WARNING

My driveway is on an angle so the second pic may look like the wheelwells are a little high, they aren't. So it was nice out and i fixed my sticking sending unit in the fuel cell and put the draglites on. The sizes are 15x8, 15x5, the backs have 5.5" BS, I had to use 1/4" wheel spacers on the fronts to clear the brakes. The tires sizes in the back are 275/50/15, fronts are 195/60/15. Enjoy the pics..........

04.jpg

01.jpg

06.jpg

03.jpg

02.jpg

05.jpg

07.jpg
 

Attachments

  • 04.jpg
    04.jpg
    110.4 KB · Views: 81
  • 01.jpg
    01.jpg
    127.1 KB · Views: 83
  • 06.jpg
    06.jpg
    96.2 KB · Views: 89
  • 03.jpg
    03.jpg
    130.7 KB · Views: 82
  • 02.jpg
    02.jpg
    113.2 KB · Views: 87
  • 05.jpg
    05.jpg
    102.9 KB · Views: 92
  • 07.jpg
    07.jpg
    104.9 KB · Views: 91
  • Sponsors (?)


mustangjoe87 said:
New headlights would make that car look amazing

Agreed. Also, i know it's a 460 and you need hook clearance but for me, that hood does nothing but throw off the lines of the car. I'd sooner get a shaker/snorkel setup and let it stick out the top. But, that's just me...sweet car!
 
Well, im not a huge drag racer, i enjoy it on the street the most, i mostly just cruise around and put the occasional chevy or ricer in their place. I built it to be street friendly. IF i had built it for the track, you could bet there'd be mini-tubs, a huge solid roller cam, 11+ compression, with a built c4 tranny. Im happy with it, engine wise, but it needs LOTS of body work.
 
Hey this just dawned on me...even if you did get your car tagged, you WILL get pulled over for that hood. I've been warned about 4 inch cowls because of obstructio of view...you're gonna have to be reeeeal sneaky to avoid the po po with a hood that big.