Nice lookin' 4eyed fox with a 4.6L

That's a swap that I'd have to ask myself "why?". The engine appears to be stock. Other than the "unique" factor, what would be the reasoning? A stock 5.0 has a lot more horsepower and torque and responds to mods much better. Now if it was a DOHC engine, that would be cool. This, I don't get.
 
Well, the block is stronger, and you can create a 1000hp 4.6 with the stock block....that at least is one good reason, but i agree i would have opted for a DOHC engine if i was going to do the swap.
 
The '98 engine has potential. I would have used a 99+ 2V instead, but if you do a PI swap to that '98 engine with the heads, cams and intake from a 99+, you will get about 265-270HP at the flywheel due to compression bump with the domed 96-98 pistons. Toss on a set of headers, off-road-H-pipe and catback, and then do a 75mm TB and aftermarket intake plenum and pullies and you are looking at 270HP to the rear wheels. Toss in some aftermarket camshafts and there is your 300 rwHP.
 
Ya I did just trade a fox for this car, but Im bored again so I put it up for trade once again

I already got offered a 2002 civic with low miles, and I think Im gonna do it just because I could sell it for about $2500 more than I could sell my mustang