Ninjastang Build Thread

sweet man, im defently going for more gear, what do you plan on revving it to? im only going more gear because i will be revving to 7k, maybe a tad bit more if needed!

ninjastang125 said:

With the 4.56s and a 26 inch slick I should trap like 6600ish.

Click to expand...

exaclty! i considered 4.88's but i would trap over 7000rpms, so i think ill stick with the 4:56's and a 26" tire

cant help ya on that but there's one on ebay for 600!!!

my car pulls so much harder with the ported heads man, its VERY worth it, i did my own though..

ninjastang125 said:

has anyone used or know anyone with a Logan intake, I like the way it looks but want to know what someone who has used it say about it.

Click to expand...

Nope, but jumping on board for you to go 11's!

Good luck man!

ninjastang125 said:

Thanks Winters! I was trying to hit 11s with this combo but my rod bearing said that it wasn't going to happen. I find this as a reason to tell the lady friend why I need new parts...

Click to expand...

I'm in the same boat as you. I'm going for 10's with the stock heads/block in my car. It's been down for 3 of the last 6 months from breaking rear ends. She is not happy, to say it nicely.

Good luck. If you don't mind, can you post some pics/more details of your wheel/tire setup?

Mark

Definitely keep us updated on everything with some pics. Look forward to it and hopefully i'll make it to the track when you take it out.

As for the wheels...I'll help ya with a pic...

Sweet! Cant wait to see it back out at the track!!!

Wait and do it all at once.

July isn't that far off to have a built motor, and you already have a start on it. No point in ripping out something to build a beast just to drop something stock back in. You may end up putting a built motor on the back burner if you just drop a stocker in now.

GO FOR THE GOLD MAN! lol

ninjastang125 said:

Does anyone know the fastest na 4.6 with a stock long block? My car being down is killing me and I got a stock long block with only 60k on it from a buddy for $375 . My plans now are to swap my cams in the stock long block, put my long tubes on, and get my new kmember and run the piss out of this motor while I get enough money to do a mmr long block with ported heads. I know I should do it right the first time but having this car sit is killing me. What are your suggestions?

Click to expand...

Swapping those cams in wouldn't really be the stock longblock, though. The one thing is, you would hate to break something major like the rear end or transmission right before you get the built motor swapped in. I'd still do it!

From Bill's list at ModularRevolution dot com.

1 . Fastest NA 2V - 10.69 @ 127.00 ( 1999 GT 5 SPD - 302ci Mod )
2 . nine - 10.82 @ 126.96 ( YEAR?,TRANS? - 286CI 2V - PURE STREET )
3 . KenB - 10.83 @ 124.41 ( 2000 GT 5 SPD )
4 . Biff - 11.05 @ 120.93 ( 1998 GT 5 SPD - F/S, PI HEADS, 287ci, BFGs )
5 . Steve Gifford - 11.42 @ 118.00 ( GT 5 SPD )
6 . Steve Drier (Houston Performance) - 11.45 @ 115.00 ( 1995 GT AUTO - SVO HEADS/INTAKE, STROKED )
7 . starkie - 11.52 @ 116.76 ( 2001 GT 5 SPD )
8 . Yellow02GTauto - 11.67 @ 112.17 ( 2002 GT AUTO - HEADS/CAMS )
9 . madmike - 11.68 @ 115.66 ( 2000 GT 5 SPD )
10 . Kurt02GT - 11.90 @ 113.29 ( 2002 GT AUTO )
11 . Gt - 11.92 @ 112.33 ( 2002 GT AUTO )
12 . Ian Mullane - 11.94 @ 111.66 ( 1996 GTS 5 SPD - PI ENG )
13 . Bill Putnam - 11.97 @ 113.20 ( 2000 GT 5 SPD )
14 . John Edwards - 11.99 @ 112.10 ( 1999 GT AUTO )
15 . Randy Stinchcomb - 11.99 @ 113.65 ( 1996 GT 5 SPD - SVO HEADS/INTAKE )
16 . TSS Racing - 12.02 @ 111.04 ( 2000 GT 5 SPD )
17 . AutomaticWeapon - 12.03 @ 112.69 ( 2001 GT 5 SPD )
18 . rrg9946 - 12.04 @ 111.00 ( 1999 GT 5 SPD )
19 . ALLMTR2V - 12.05 @ 111.27 ( 1998 GT 5 SPD - HS )
20 . code3GT - 12.09 @ 114.00 ( 2001 GT 5 SPD )
21 . Racer_X - 12.15 @ 112.90 ( 1996 GT 5 SPD - HS )
22 . Doug Johnson (Fast2v) - 12.17 @ 112.02 ( 2000 GT 5 SPD )
23 . Jeff99GT - 12.18 @ 109.30 ( 1999 GT 5 SPD )
24 . 96SOHC - 12.19 @ 101.69 ( 1996 GT VERT AUTO - HS - VT CAMS )
25 . John Vanover - 12.23 @ 108.99 ( 1999 GT AUTO )
26 . Kurgan - 12.24 @ 110.03 ( 2001 GT 5 SPD )
27 . Lazer Red 99 GT - 12.25 @ 110.31 ( 1999 GT 5 SPD - VT cams )
28 . Shane Williams - 12.25 @ 110.00 ( 1999 GT AUTO )
29 . Gary Youngblood - 12.26 @ 108.00 ( 2001 GT AUTO )
30 . ponynx - 12.30 @ 110.26 ( 2003 GT 5 SPD )
31 . TruBlu01 - 12.39 @ 108.89 ( 2001 GT 5 SPD )
32 . silver2k2gt - 12.47 @ 107.68 ( 2002 GT AUTO )
33 . Ed Galanda - 12.47 @ 105.31 ( 2004 GT 5 SPD )
34 . RavenGT - 12.50 @ 106.80 ( 2000 GT 5 SPD - SOLD )
35 . Ruckus46gt - 12.52 @ 107.81 ( 2000 GT 5 SPD )
36 . wht00gt - 12.59 @ 107.04 ( 2000 GT 5 SPD )
37 . playground60 - 12.60 @ 110.14 ( 2002 GT 5 SPD )
38 . 96SOHC - 12.60 @ 106.64 ( 1996 GT VERT AUTO - HS )
39 . Real-slo98 - 12.61 @ 108.96 ( 1998 GT AUTO - HS )
40 . auto02 - 12.61 @ 107.00 ( 2002 GT AUTO )
41 . Extreme281 - 12.62 @ 108.52 ( 2002 GT 5 SPD )
42 . EVIL GT - 12.65 @ 108.59 ( 2000 GT AUTO )
43 . GMsucks - 12.68 @ 106.64 ( 2003 GT )
44 . 98GtConvt - 12.70 @ 110.40 ( 1998 GT 5 SPD VERT - HS )
45 . crawlinGT - 12.71 @ 106.90 ( 2002 GT 5 SPD )
46 . Madi98GT - 12.72 @ 107.13 ( 1998 GT 5 SPD - HS )
47 . AR1Grdpoundr - 12.72 @ 107.34 ( 1998 GT 5 SPD - HS )
48 . Mustang03 - 12.72 @ 107.76 ( 2003 GT 5 SPD )
49 . JayZ - 12.73 @ 107.39 ( 2002 GT 5 SPD )
50 . Frost2V - 12.73 @ 106.86 ( 1999 GT AUTO VERT )

I didn't mean to confuse you. I just know your ET goals and going 11's. It would just stink to break something(tranny/rearend) that could set you back when you don't have your built motor in at this time. I was just trying to point out that you could suffer breakage before you final ET goals. I would also throw that motor in and run it like you are considering, but it might not be the best choice considering you are shooting for benchmark. Racing is just hard to get away from.