Nope was not me.....

Did this certain '94 GT have an S351 wing and saleen replicas? It wasn't me, but I may know who it is.



nope wasnt you will. it was a friend of mine.


i dont really wanna describe the car too much. i dont know how he feels about it being public knowledge. we ran again tonight. (yup. another trip to mexico. racking up the miles) first run we went with me at 6k in 2nd. got a car and pretty much held it. 2nd run from 3500 in 3rd he got a car and held it till the speeds got up there (130ish). i started to creep up and we let off.


my aerodynamics are hurtin. no hood FTL.
 
which car you driving? cuz unless you are understating it I really don't see a vr4 with a couple bolt ons hanging with a turbo stang?? course all is different if you got more serious stuf than I'm thinking...
If the engine is bone stock, including heads, intake, etc ... then a mild turbo setup wouldn't be that impressive at all. Just because it's turbocharged does not make it fast...
 
Here you go:

Exterior
Length: 180.3 in.
Width: 72.4 in.
Height: 49.3 in.
Wheel Base: 97.2 in.
Curb Weight: 3737 lbs. :eek:

Interior
Maximum Seating: 4


Performance Data

Performance
Acceleration (0-60 mph): 5.5 sec.
Braking Distance (60-0 mph): 120 ft.
Road Holding Index: .9 g
Base Number of Cylinders: 6
Base Engine Size: 3 liters
Base Engine Type: V6
Horsepower: 320 hp @ Max Horsepower: 6000 rpm
Torque: 315 ft-lbs. @ Max Torque: 2500 rpm
Drive Type: AWD
 
well in VR4's prior postings he stated that when his hood flew off he hit a 12.6 at PIR and he let off before the finish line. If all is accurate then he is definitely capable of holding to a turboed stock block stang... BUT none of us went to Mexico so.... ;)
 
hes running 10 psi. stock internals and im pretty sure heads/cam too.

im running 17 psi and my times were previously stated. these cars are awd but dont discredit them on the high end. gearing and aerodynamics are a big help (i do 115 in 3rd)