Opinions on long tube swap headers

Boosted92LX · Dec 23, 2010

I'm working on scratching up parts for a 408w, and I need to start looking for headers. I am going to use 225 heads and hope to make 550-600whp. That being said I need to flow a lot, I'd like opinions on brands. I've used Hooker in the past and was pleased, but a lot has changed since my last go-around. I've kind of eyed KOOKS, not sure If BBK makes anything large enough for what I'm trying to do...I'm thinking 1 7/8 primaries and a vic jr. or super vic on the intake side....any opinions would be appreciated! thanks!

85_SS_302_Coupe · Dec 23, 2010

Tough to beat Kooks if you can afford them.

stykthyn · Dec 23, 2010

Kooks

1bad67sbf · Dec 23, 2010

kooks are bad ass but hooker super comps should get the job done and save some cash.

1bad67sbf · Dec 23, 2010

here are a few and kooks seems to be priced about the same as the super comps so its up to you. i would get the kooks because they are nice and not everyone runs them.

5.8L/351 - Headers - Exhaust - MUSTANG - FORD - 1992 - SummitRacing.com

Boosted92LX · Dec 23, 2010

You're right, they're not too far off on price, and the kooks are stainless.... Thanks. Anybody ever used them that could comment on fit? I'd assume they'd be spot on, but It's always nice to hear from experience.

robo · Dec 24, 2010

SSeater said:
You're right, they're not too far off on price, and the kooks are stainless.... Thanks. Anybody ever used them that could comment on fit? I'd assume they'd be spot on, but It's always nice to hear from experience.

the kooks are not automatically stainless! the 600 something priced ones are mild steel and uncoated.

kooks in stainless retail for right around a grand.

i'm going to buy the kooks in stainless!

1bad67sbf · Dec 24, 2010

i like to wrap my headers and it has worked great in the past, i have also done downpipes on my last turbo car and header pipes on my 4 wheeler's i had with no problems and cheap. on summit SS is like $650 and ceramic is around $900

robo · Dec 24, 2010

1bad67sbf said:
i like to wrap my headers and it has worked great in the past, i have also done downpipes on my last turbo car and header pipes on my 4 wheeler's i had with no problems and cheap. on summit SS is like $650 and ceramic is around $900

summit does not sell stainless headers for 650! i know the computer shows that in the "materials" area but rest assured it is a misprint. 650 is for the mild steel, uncoated version! stainless kooks headers are real close to 1000 dollars. ceramic coated are priced similarly.

if you can buy kooks headers in stainless for 650 please let us know where as i'll buy a set or two.

you have to add the suffix "s" to the part number for stainless. notice the summit part number is absent of the "s" at the end.

1bad67sbf · Dec 24, 2010

i have got alot of things cheaper because the are misprinted from a company. may be worth the phone call.

LS-what? · Dec 24, 2010

IMHO Kooks are junk for what u spend on them they never fit always hang to low but do a search on yellowbullet. I went with a pair from accufab yes they do more than throttle bodies..Good luck. Mine should be here mid jan so Ill chime in later.

Exhaust

JadeGT · Dec 30, 2010

I also use Accufab which is another option for custom headers. I have a set on a 363 and they fit really well. I also saw too many people bitch about Kooks.

90lxcoupe · Dec 30, 2010

LS-what? said:
IMHO Kooks are junk for what u spend on them they never fit always hang to low but do a search on yellowbullet. I went with a pair from accufab yes they do more than throttle bodies..Good luck. Mine should be here mid jan so Ill chime in later.

Exhaust

was gonna say that, i'd buy kooks used if i got a deal, but if i was buying new id probly go accufab. keep an eye out on corral and the NMRA digital classifieds, really good deals can be had on there.

Boosted92LX · Dec 31, 2010

I'll check into that. Thanks guys!

Opinions on long tube swap headers

Boosted92LX

It's only an inch or two. What's the big deal?

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

stykthyn

I want to measure mine. It doesn't look that tall.

1bad67sbf

Active Member

1bad67sbf

Active Member

Boosted92LX

It's only an inch or two. What's the big deal?

robo

Member

1bad67sbf

Active Member

robo

Member

1bad67sbf

Active Member

LS-what?

JadeGT

New Member

90lxcoupe

Boosted92LX

It's only an inch or two. What's the big deal?

Similar threads

Opinions on long tube swap headers

It's only an inch or two. What's the big deal?

it sucks (I know) to be on the receiving end

I want to measure mine. It doesn't look that tall.

Active Member

Active Member

It's only an inch or two. What's the big deal?

Member

Active Member

Member

Active Member

New Member

It's only an inch or two. What's the big deal?

Similar threads

Privacy & Transparency

Privacy & Transparency