• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Ouch !!! Boy Did It Hurt

  • Thread starter Thread starter Rjaaaaaa
  • Start date Start date Jan 6, 2017
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Jan 9, 2017
#21
  • Jan 9, 2017
  • #21
02 281 GT said:
Any damage to the windshield? This happened to me in my '86 GT about twelve years ago. The flatter hood and roof line on the foxes at least meant that the windshield suffered no damage when it happened. Sorry to hear.
Click to expand...
no windshield damage, only cowl and hood thanks
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 9, 2017
#22
  • Jan 9, 2017
  • #22
1. Was the factory safety latch not there?

2. You can do the football trick. Put a deflated football in the cowl and air it up, it'll pop most of the dents out
 
Reactions: Davedacarpainter

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Jan 10, 2017
#23
  • Jan 10, 2017
  • #23
billison said:
1. Was the factory safety latch not there?

2. You can do the football trick. Put a deflated football in the cowl and air it up, it'll pop most of the dents out
Click to expand...
Hey thanks for the football idea, never thought of that.
No regular hood latches on the hood only the two hood pins, no hardware on the fiberglass hood when I bought it. I certainly might rethink that situation.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jan 10, 2017
#24
  • Jan 10, 2017
  • #24
If you do the football track, please video record it, I would love to see it's in action
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Jan 10, 2017
#25
  • Jan 10, 2017
  • #25
+1 to the football video
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Jan 11, 2017
#26
  • Jan 11, 2017
  • #26
billison said:
You can do the football trick. Put a deflated football in the cowl and air it up, it'll pop most of the dents out
Click to expand...

Do you start with Tom Brady's football or.....?
 
Reactions: A5literMan and Davedacarpainter

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Jan 11, 2017
#27
  • Jan 11, 2017
  • #27
Rjaaaaaa said:
no windshield damage, only cowl and hood thanks
Click to expand...
I'd always worry (if I had a hood setup like yours) that somebody would steal my hood pins while my car was parked and I'd drive off and have my hood fly up.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,564
21,735
234
Box behind Walmart
Jan 11, 2017
#28
  • Jan 11, 2017
  • #28
 
Reactions: A5literMan, billison and Davedacarpainter

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Jan 14, 2017
#29
  • Jan 14, 2017
  • #29
Noobz347 said:
Click to expand...
Yea sorry about the pics, I'll try to bring myself to take a few soon. It's not as bad as I first thought if I can save the hood. If I can't save the hood then it's going to be a lot more painting to do and added cost.
 

BMW Rider

Mustang Master
Oct 9, 2014
140
277
83
Calgary, AB, Canada
Jan 15, 2017
#30
  • Jan 15, 2017
  • #30
That scenario is why I kept the secondary latch on my hood and the reason I chose the AeroCatch hood pins over old style ones. It is easy to see the Aerocatch is open even from the drivers seat reducing the chance of having the hood pop up.

 
Reactions: RaggedGT, 1990slow50H, pats91 and 2 others

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,766
3,224
203
Taylorsville ky
Feb 2, 2017
#31
  • Feb 2, 2017
  • #31
Sooooo. Where's the smashed hood pics?
 
Reactions: billison

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Feb 3, 2017
#32
  • Feb 3, 2017
  • #32
So here's the damage, ther are also some cracks in the paint in the middle where the hood hit the roof.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,134
10,752
213
polk county florida
Feb 3, 2017
#33
  • Feb 3, 2017
  • #33
Got any roof damage?
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Feb 3, 2017
#34
  • Feb 3, 2017
  • #34
Rjaaaaaa said:
So here's the damage, ther are also some cracks in the paint in the middle where the hood hit the roof.
Click to expand...
Dang brother, that really sucks.

At least it's fixable.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Feb 3, 2017
#35
  • Feb 3, 2017
  • #35
Now set up your camera to record, insert football, inflate, then post the video.
 
Reactions: Davedacarpainter

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Feb 3, 2017
#36
  • Feb 3, 2017
  • #36
That cowl panel doesn't look like too hard of a fix. It just sucks, man. Gotta redo the stripe. I like the way you continued behind the hood and under the plastic cowl panel.

Now you have a reason to buy a stud puller set. They're worth the weight in gold.

There's some creasing going on and I'm not convinced the football method would get them out. A hammer and dolly would work, too. Reach in there and fix that thing.

I've seen where people slid a small screw jack in there and pushed a block of wood up from the bottom and tapped the dents out with a body hammer.

Either way, the cowl can be fixed...so can the hood.
 
Reactions: Davedacarpainter

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Feb 3, 2017
#37
  • Feb 3, 2017
  • #37
That is a fair amount of damage IMO. Having to strip down a hood and repair & repaint it along with repairing the cowl and repainting that is a fair amount of work for the non-professional DIY guy. To pay somebody to do that work would be a fair amount in labor and materials.

The football nor the scissor jack will get that crease out near the edge of the cowl where it meets the passenger fender. You can use the methods to pull most of the dent out. After that you can grab a dolly and reach up inside the cowl and lightly bump the inside upward with it to try to get the crease out. There is not enough room to swing a hammer in there. If the crease still remains then it's stud welding time IMO. The center part of the cowl is actually really flimsy and I pulled it out with my hands.

Been there done that. Pics are from my old T-top and mine had roof damage too (very little though).
 
Reactions: 90sickfox and Davedacarpainter

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Feb 3, 2017
#38
  • Feb 3, 2017
  • #38
Hey guys thanks for your interest and input. I'm hoping I won't have to get into the stripe,since I just painted it recently I hope the paint match won't be a problem. I'll probably have to paint out to the fender top body line. There is a lot of damage underneath in the corners where the hinges bolt up. That's more of a concern for me to save the hood ??
I'm thinking of rigging something overhead that I might be able to slide a board or something into the cowl and pull it up ?? we'll see, right now it's driveable and I've had it out in the unseasonably good weather here in south central Pa. Vrooom Vrooom
 
Reactions: 90sickfox, Davedacarpainter and RaggedGT

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Feb 26, 2017
#39
  • Feb 26, 2017
  • #39
well it was nice the last couple of days so I started work on the hood and cowl, didn't try the football thing. I was able to bend some flat stock to be able to get in under the cowl and lift the metal back up. It came out pretty good with the need of minimal bondo.
Also pieced the hood back together and fiberglass it all back into place and it also only needs some small bondo to level every thing out, I'm heading in the right direction..
 
Reactions: 90sickfox, Davedacarpainter and RaggedGT

Rjaaaaaa

Well-Known Member
Jul 11, 2016
217
159
63
Feb 26, 2017
#40
  • Feb 26, 2017
  • #40
FoxMustangLvr said:
That is a fair amount of damage IMO. Having to strip down a hood and repair & repaint it along with repairing the cowl and repainting that is a fair amount of work for the non-professional DIY guy. To pay somebody to do that work would be a fair amount in labor and materials.

The football nor the scissor jack will get that crease out near the edge of the cowl where it meets the passenger fender. You can use the methods to pull most of the dent out. After that you can grab a dolly and reach up inside the cowl and lightly bump the inside upward with it to try to get the crease out. There is not enough room to swing a hammer in there. If the crease still remains then it's stud welding time IMO. The center part of the cowl is actually really flimsy and I pulled it out with my hands.

Been there done that. Pics are from my old T-top and mine had roof damage too (very little though).
Click to expand...
Whoa nice work, I'm in about the same state as your pictures show, didn't use a puller, I took out the hinge and was able to get in the corner through there.
 
Reactions: FoxMustangLvr
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
728
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
S
'88 GT Convertible - Croatia, Europe
  • snovak
  • Oct 9, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 23 24 25
Replies
498
Views
51K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
snovak
S
So,...You're gonna take your car to a shop to have it worked on...lets talk.
  • CarMichael Angelo
  • Mar 3, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 3, 2019
Rdub6
S
For Sale 2003 Cobra Redfire Convertible
  • SpectorV
  • Feb 20, 2019
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
5K
SN95 Mustangs For Sale (1994-04) Feb 20, 2019
SpectorV
S
Getting my car decent. Looking for thoughts on this long list.
  • Wayne Waldrep
  • Jun 10, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
50
Views
11K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 17, 2020
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?