Pacific Raceway (Auburn) this Sunday (19th)

stock50LX · Mar 14, 2006

Who's coming? Gates open at 8:00. Weather is predicted to be very good, at least at this point.

stock50LX · Mar 16, 2006

TTT -the silence is thunderous

MyFordsFly · Mar 16, 2006

Cant this time around, too much stuff goin on.

2004mysticobra · Mar 16, 2006

What do ya have to have to run a stocker? May check out my new notch to see what it runs stock before I rip into it.
Helmet?

stock50LX · Mar 16, 2006

2004mysticobra said:
What do ya have to have to run a stocker? May check out my new notch to see what it runs stock before I rip into it.
Helmet?

You won't need a helmet unless you run 13's. You will get-away with a little fudging, so you shouldn't need one until you make some changes to your stocker. You will need to be certain you have all the lug nuts and an overflow container for the radiator, as well as a rigid battery hold-down.

For you, I would recommend a timing light and a few metric tools to take out the air silencer.

white 89 GT · Mar 16, 2006

Hi jon, im still working on the 80. Its back on the ground with new k-member spindles,calipers,5lug rotors,coil overs and struts.
Now Im in need of an engine or car trailer as I have sold my home and close around april 7. Hope to have it done next month to get out and do some racing with you.

I may come out and watch for a few min.

stock50LX · Mar 16, 2006

white 89 GT said:
Hi jon, im still working on the 80. Its back on the ground with new k-member spindles,calipers,5lug rotors,coil overs and struts.
Now Im in need of an engine or car trailer as I have sold my home and close around april 7. Hope to have it done next month to get out and do some racing with you.

I may come out and watch for a few min.

That's a surprise. I didn't know you had it on the market. I have your engine stand so if you need it delivered, just let me know. The engine was not in good shape. The lifters and some other parts were abused. The rebuild was done in the late '80's.

white 89 GT · Mar 16, 2006

Yeah I was thinking the upper end may have needed something but the lower should have been good, unless the lifters sent metal through the motor.
I put the house on the market last month and it sold fast. Im moving back to Tacoma, will have larger space to work on the car stuff this time.
Will get with you soon so you know where im at.

fellamansteve · Mar 16, 2006

I think I am going if the weather is as good as predicted.

stock50LX · Mar 17, 2006

white 89 GT said:
Yeah I was thinking the upper end may have needed something but the lower should have been good, unless the lifters sent metal through the motor.
I put the house on the market last month and it sold fast. Im moving back to Tacoma, will have larger space to work on the car stuff this time.
Will get with you soon so you know where im at.

Main bearing were showing a lot of copper.

stock50LX · Mar 17, 2006

fellamansteve said:
I think I am going if the weather is as good as predicted.

That will mean 3 of us, as I think Tyler is bringing his Cobra.

fellamansteve · Mar 17, 2006

There's a couple other people I know of that I don't think post on here who are planning on going as well...should have a handful of stangs out there.

KyleL · Mar 17, 2006

I hope to be there. Just finishing getting my car re-done with the necessary saftey equip to run the car, as well as some other upgrades. Gonna work all day Saturday to finish, so hopefully i'll make it. Where is everyone pitting?

stock50LX · Mar 17, 2006

KyleL said:
I hope to be there. Just finishing getting my car re-done with the necessary saftey equip to run the car, as well as some other upgrades. Gonna work all day Saturday to finish, so hopefully i'll make it. Where is everyone pitting?

Let's try meeting in the infield to the right of the entry road. Proceed straight after paying for entry until you hit the area just outside the staging lanes, where the entry road intersects, or "T's" . I hope to see you there. I know how those projects can consume more time than foreseen though.

TheRedBlur · Mar 17, 2006

still busy with school.. The stang's on the backburner untill I get further out of debt. I will try to make her go by summer, we'll see though.

Warbird19 · Mar 17, 2006

Finaly broke the clutch in and got my tune, ill be there!

stock50LX · Mar 17, 2006

Warbird19 said:
Finaly broke the clutch in and got my tune, ill be there!

Sounds good. I haven't seen you for four years since I bought the 10 holes from you.

stock50LX · Mar 17, 2006

TheRedBlur said:
still busy with school.. The stang's on the backburner untill I get further out of debt. I will try to make her go by summer, we'll see though.

It's not a sport for poor students, or poor anybodies, for that matter. I took 25 years off after HS.

Tylerb59 · Mar 17, 2006

I'm 75% along with the weather dependency of course.

If the taxes / title / registration is worked out well enough on Saturday I'll try to make the trip down there, until then I'll be sticking close to home.

Man the thought of 11 second passes again is killing me.

Warbird19 · Mar 18, 2006

Yeah i know its been along time, i Joined the Air Force and came home already. So i put the M/T street slicks on and im ready to go! Im pumped up, i havent been to the track in a good while. Are we meeting anywhere in the pits? Also whats the group i should join for point? Thanks

Pacific Raceway (Auburn) this Sunday (19th)

stock50LX

Curmudgeon

stock50LX

Curmudgeon

MyFordsFly

2004mysticobra

New Member

stock50LX

Curmudgeon

white 89 GT

Member

stock50LX

Curmudgeon

white 89 GT

Member

fellamansteve

New Member

stock50LX

Curmudgeon

stock50LX

Curmudgeon

fellamansteve

New Member

KyleL

New Member

stock50LX

Curmudgeon

TheRedBlur

Active Member

Warbird19

stock50LX

Curmudgeon

stock50LX

Curmudgeon

Tylerb59

Banned

Warbird19

Similar threads

Pacific Raceway (Auburn) this Sunday (19th)

Curmudgeon

Curmudgeon

New Member

Curmudgeon

Member

Curmudgeon

Member

New Member

Curmudgeon

Curmudgeon

New Member

New Member

Curmudgeon

Active Member

Curmudgeon

Curmudgeon

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency