I had a day off work, so I decided I should try to do something about the chipped up nose on my car, and show ya guys some pics in case somebody's lookin for ideas. I did this because I could'nt find touch-up paint to match my car, and I was sick of small rocks eating up my paint up front. This took about 9 1/2 hours, lots of sanding (60 to 100 to 220 grit paper), a B&D sanding mouse, a dremel moto tool, 1 can of Plasticote Bumper-Black and a few beers for me to keep my sanity. Here we are...
F*@#^&*$ rocks
After very careful taping, the sanding begins
I dremeled around the blue tape to get the line perfect
Sanding is finally done
Painting....I painted then sanded with 220 grit 3 times before the final coat went on (used the paint itself as a primer)
FINISHED!!
Well thats it, hope you guys like it....it took me a long time but the end result was what I would consider flawless.
F*@#^&*$ rocks
After very careful taping, the sanding begins
I dremeled around the blue tape to get the line perfect
Sanding is finally done
Painting....I painted then sanded with 220 grit 3 times before the final coat went on (used the paint itself as a primer)
FINISHED!!
Well thats it, hope you guys like it....it took me a long time but the end result was what I would consider flawless.